Recent content by RW-7

Great boxes. Much better than the series one 26”. These work well with the end cabinets for the 44”. If you need some extra space. I was after more drawers for smaller tools at my work bench.

Those tend to splatter like crazy. Another good option is the Graco JetRoller. It sprays close to you roller so you can essentially backroll instantly. Its frame will accept any 9" roller cover so you can use a cover that won't splatter all over. I like lambs wool myself. This setup is slick...

After some online research and hearing what our friends here at GJ have said, I settled on this Quincy QT-54. :thumbup:

Most Body fillers on the market today are DTM (Direct To Metal) and can be applied to bare metal. Save yourself some money and skip the Epoxy Primer. Be sure and treat that metal once you have removed all the rust. You can coat the area with a rust inhibitor, or convertor. Let that cure, clean...

Its not necessary to prime prior to texture. Most texture today has resins and other bonding agents to help with adhesion even on dusty drywall surfaces. Always prime after texture.

You will need to start with a very flat wall if you want it to look good. A level 5 taping job, with a sanded prep coat will give you that. After that its time to prime. this step will seal your taping job and give the top coatings a nice surface to adhere to. Sand in between every coat. A pole...

See Sig.

Welcome back to Oregon! My folks live in Redmond. Hella cold over there right now. Good luck with everything over there and STAY WARM! :beer:

My latest project. In more ways than one..:D and why the car is so dusty. My Wife and I are expecting our first Daughter in March!! I put up some wainscoting, a chair rail, crown molding, new window shelf, and all new trim, then painted everything to perfection. Its way pretty bare before, but...

Wow. Sounds like a fun project! :thumbup: Thanks!! Picked that one up at Mazda North America in SoCal. I was down there for a car show. One of my favs for sure.

Sounds good I might check into wahtcha got. :thumbup: That box is full of RX-7 specific books and old Rotary Rocket Mags. The car is a little dusty from my most resent project..

Ya I got a few. Mostly ones from the 70's. A couple engines worth. My airless paint sprayer is under the bench next to my compressor.

Hey ya'all. I thought I would share my garage with everyone. My wife and I move in almost 2 years ago to our wonderful house and I was lucky enough to get a room all to myself. Well with the exception of the clothes washer and dryer. :lol: I am a Commercial Painter and tinker with different...

Sorry About the HUGE pics. Here is one in my collection. I mostly use it for spark plugs. The thumb wheel on it really helps get the plug threads started in tight spots. I took a profile pic and it does look a little thin and almost seems to have a bit of an angle to it. Handy little fucker...