Recent content by Ryano121

I talked to Mr. Heater tech support today. They suggested that I pinch the top end of the top burner and bend it over on itself. The flame wasn't actually rolling out, it was just leaking a little out of the top burner. I pulled the unit apart, and modified the top burner as stated above...

I would say that it is not crisp and uniform like gas burner on a range or on a torch. It is blue from the beginning of the heat exchanger about 6 inches out and then turns orange as it turns the corner. All five burner tubes look the same, so I assumed that it was not a crack in the HE (or...

Here is the issue. Just installed the Mr. Heater 75k. Did a propane conversion because the store only sold the NG model. It will light and run fine. (BTW already adjusted it to 10" wc per the conversion instructions). It runs for about 12-15 minutes and then the top flame rollout sensor will...

Gofast, After bending the burner, did that work for you? I am having the same problem. Shuts down after about 15 min or so. I pulled the burner out and tried to bend it where I thought would help, but still the same problem. Do you have any pics or a link from mr. heater with the pics of how...

Don Tina, did you ever come up with a solution for this? Mine does the exact same thing. I can reset the sensor every 15 minutes, but nobody wants to do that!!

You can plug it in and turn the thermostat to heat. You should hear the exhaust fan start to run. After about a min. or so, you will hear the automatic ignition start to fire, as if to light the burners. They will do this 3 times before locking out. If you unplug the unit and replug it in...

Teken, My house is finished and the shop is heated. With that being said, there would be extensive dw work on any of the areas in the house that needed to be hardwired. That is why I am definately going with a wireless system in the house. I was really just wondering if people have had any...

I was actually considering the DSC Alexor for the home and shop combo. According to different websites that sell these, they say wireless range of 1200' vs. most others saying 200'. I thought this might be perfect for the adding the shop as well. A couple window sensors and a motion sensor...

Has anyone used wireless motion or door sensors to tie their house security system into securing the workshop as well. My workshop is about 100' or so from the house, and I was wondering if anyone has tried to secure there shop in this way? Is there any security equipment that is better for...