Recent content by scelectrician

I'm an electrician by trade, and what you must understand is these guys might not look at everything but they look at what counts. If your actually doing it in commerical or industrial you will have the inspector in for a in wall inspection, and a above ceiling inspection. When they see these...

check out this website, www.interlockkit.com will show you how to wire it up, and also will show you a device to make your panel safe without having a transfer switch. But just remember this with 3500 watts your not going to get that much power. it's less than 30 amp at 120v. So your not...

long as the breaker is rated the same as the panel it is ok, and these breakers are made to be interchanged, trust me done alot of load centers in my time and also switch gear and motor controls...................

One thing you might want to check is to see if the plug is not tied to the main breaker, have seen this many times when a person does not have a spare breaker or the room to install a breaker......but I have been to a house where we pull the meter and there was a plug still hot, the reason was...

That's not a bad panel but if you want something that will last for a long time get a cutler hammer. the breakers are very avaliable and also interchangeable with alot of different breakers, where you will only be able to use GE breakers for that panel, just my .02

That's the frist thing you do before you put power on anything you put your meter on it and if it's fishy you check with another meter. What they did was hook up 480v to the building. simple as that

I've never laughed so hard when I read this. The radius is 90 degree..........What you wanted to know is if he had a sweeping 90 or not, or the diameter of the pipe, also whenever running pvc pipe always use ridgid 90's which are metal 90's and this way when you pull the wire in with a rope it...