Recent content by Serj_DMR

The columns are indeed portable. You roll the columns into place and bolt them to the floor using recessed anchors. Once you are done with your project for the day, you unbolt the columns from the floor and roll it away! Takes 15 min or so to setup/teardown! :) Feel free to call our main line...

Power Sedan, The weight capacity on the unit is 6,000 lbs. Anything under that and you are good to go. Case in point, one of my favorite things to show, I have attached a photo of an old Hummer on the MaxJax. They weigh in at 5800-5900 when they are stripped to stock. Zero complaints from this...

Acuratechva, The supplied bolts that came with the unit originally will work with the epoxy anchor replacements. You already have everything you need! Let me know if you have further questions or concerns by calling in and asking for me. -Serj

Mr. Garage, I have no idea who this "serg" character is, but he sounds awesome! :p -Serj

There was supposed to be the word "garage" somewhere in there...referencing the username... :( -Serj

Chadddada, Our company and our lifts are completely separate from Bendpak. While the designs may share stark similarities, we are completely different companies with different offices, manufacturing, etc. Any parts that may be needed can be found here in our facility in California. The entire...

Aww shucks! Thanks! :D I will pass these suggestions/requests on to my managers and see what is in the works along these lines. Denwood has some great points and obviously safety is the priority here. I am by no means an engineer, but I do have access to some here. I will pass on the concerns...

Midwesta, To clarify for the other users: There were around 20-25 units from what we can tell. Seeing as the divider blocks don't have their own serial numbers, we have no way of tracking them individually. If you called in two weeks ago, that would put it right before the holiday season...

James, Thanks! We do our best to take feedback seriously as we are not omniscient and can always improve things in one capacity or another. I can at least pass the feedback up the chain! 52wrench, I can understand that sentiment completely. I also would do everything in my power to prevent...

Cue, This is not the customer service experience we want you to have with our products or partners. Please call the main Dannmar line and ask for Miguel in Tech Support. We can get you taken care of. Our main line is: 877-432-6627 -Serj

Let's try this again! The photo:

Hey Guys, So we have been watching this thread as it’s definitely something we want to address and make clear our stance on this matter. This modification, while on paper looks good, can lead to unforeseen issues. As Dennis pointed out, the unit will function just fine if installed correctly as...

Hop, Clean gave some good suggestions here. Sounds like there might be issues with the power in your garage, the motor/cap might be having issues, or the ATF might be too cold. Anything below 50f and the fluid will start to thicken up. Anything below 45 and the fluid is, essentially, gel. It...

Cue, The best way to figure out where to put your posts would be to mock them up by placing them WITHOUT drilling or anchoring. Then bring in your various vehicles to ensure the lift points are hit correctly and adjust their placement as needed. Once you have found that spot that works for all...

Hey Guys, I have attached the most recent baseplate layout for the MaxJax. Please feel free to PM me or call the main line if you guys have any further questions. -Serj Dannmar Tech Team