Recent content by Sharpest

Been awhile. My bathroom renovation project came to a screetching halt thanks to a work sponsored move. I had to relocate about 3 1/2 hours away for work and my free time at home has been spent on landscape maintenance and fishing so most of the big projects have taken a back seat with the...

Got the water heater home run in and installed about ~70% of the insulation. I need to drill/cut holes in the top plate and install vent pipes for the dryer and fart fan. I also fit and assembled the shower mixer valve. I am fairly novice at soldering copper but haven't had any failures yet...

Got some batts put up. Since the studs are spaced off the exterior sheathing by the horizontal perlins, I have a 5" cavity to fill on two walls. One wall is traditional 2x4 and the last is traditional 2x6. I have been accumulating random batt material from here and there and came up with a plan...

I used snap traps for awhile. My shop is next door to a feed store and I have always had rodent problems, big and small. The problem with the snap traps is that my shop is 5000 sq ft and has a ton of **** in it so I frequently forgot where I put the damn things until something started stinking a...

Good thing most realtors are retarded.:lol_hitti

Missed this one earlier. I've thought about it. They are all heavily water damaged and in pretty bad shape. There are three office rooms total, each about 12x12'. One is full of furniture and other junk including the cabinets and some other pieces for the interior of the bathroom. As soon as I'm...

I reached out to a local dude that I met at a good friend's wedding that cuts down trees for a living. He lives in the same town as my place. He over indulged on the night of the wedding and forgot to come by my shop the next day and I hadn't gotten around to contacting him until now, ~1 year...

I was not aware I could host picture here, I'll look into that to fix up this thread. Imgur is the easiest I've found to upload but direct linking is kind of a PITA since you have to do it from the full desk top site.

Worked on the bathroom some more today. Sealed up a couple exterior metal penetrations and ran wiring home runs. The sub-panel I'm tying in to is mounted in an "exterior" wall of an adjacent office separated from the bathroom by a breezeway. So I had to cut drywall inside the office. This hole...

Worked on the bathroom this weekend. Since there's no telling how long it will take me to finish the rest of it, I went ahead and finished off the water lines and set the toilet. I only had one joint I forgot to glue in the supply lines so that was nice. The toilet is ancient, it weighs like...

Bump, I will entertain offers.

I have a few boxes of various Simpson frame hangers left over from recent projects I need to clear out. The majority of them will fit in a large flat rate box for shipping. All listed prices are plus shipping in one large flat rate box per box of hangers; ~200 Metal-wood stud combo anchors...

Bump

I painted the trailer deck today. I used a KBS two part coating that a friend recomended and it came out ok. This material *seemed* to spray better than the Rustoleum but my experience spraying paint of any kind from a gun is pretty limited. The final finish has a bunch of tiny bumps in it which...

Got the floor and ceiling upper decking done. The green boards are the original tongue and groove 3/4" pine floor. The overall footprint of the bathroom is the same as original but I busted the **** out of quite a bit of the original flooring before I realized I could re-use it. So between...