Recent content by snydesc

https://i.imgur.com/xWqGN9c.jpg I hired a well reviewed gutter company to put gutters on the garage I built. Besides the concrete, this is the only other task I had someone else do (Everything else I did myself). When they finished their work I noticed they put a rather large hole in my...

I fixed my angle iron, it's now like in the picture old__man posted. Previously I had a bolt that went through the face of the rafter to prevent sway but that would not be feasible when I drywall. I also adjusted the tracks a bit so the spindles don't go out so far. I am still having issues...

It ended up being the spring mounted on the wrong side. I switched sides and the door opened up smoothly. The only issue I have is I need to balance it as 1 side is about half inch off the ground when closed. Thank you for all your help.

I will check the springs when I get home. I have a feeling that is what may be wrong. I would have thought the door would not have opened if I put it on backwards. Rails are parallel, and it's a Hass 600 series door.

I have a 9'x7' garage door with torsion springs that I am running into issues with. This is a new install for a newly build garage. I wound the spring but when I lift the door I can only lift it about 20 inches before it gets stuck. It sounds like the door is scraping against the rail where the...