Recent content by SportBikePC

Awesome info… I have a 30x40 that should be getting done this summer.. I can’t take another winter out here working ..

Needed more air flowing .. Picked up some Milton 1/2” G9

So got my new air compressor up and running after x-mas, and man I tell you she is a beast! (Compared to what I had) Was running an Eaton 5hp 60 gallon for 10yrs . Upgraded to the Saylor Beal Duplex Unit, I found on eBay brand new in crate for about $2200- less than msrp! It’s a 10 hp with...

Well appreciate the help guys.. I figured all was needed to hook this up was the info on the motors.. I’ll try and call SB today.. what specific info. Would I need besides what TRWham mentioned ( MCA & MOPD)? I’m going with a 100amp sub panel, so can I eliminate the need for safety...

Inside the panel there’s this.. white paper inside of door Only thing .. besides the mag . Starter And fuse info

Only on motors I have found

Well here’s the info I have.. and it’s a regular compressor to produce air for a shop you can easily visit saylor beall dot com and it’s brand new it came from factory .. Page 3 you can read the description .. https://www.saylor-beall.com/wp-content/uploads/SaylorBeall-Duplex-Compressors.pdf

Ok cool didn’t think it could use 1 line in to compressor.. just assumed each motor needed it’s own circuit.. I think I’ll just run a sub panel inside then and get an outlet and light in there.. while I’m at it, seems easier that way..

Yes either one can run on its own, or how it’s currently setup in which both will run if demand calls for it .. (this is controlled by the orange box in the compressor panel pictured previously) So each motor needs it own disconnect and breaker

Like this..

Yes my 200amp panel is in my pole barn and the compressor is in a separate building..

Here’s the compressor panel..

Yes and No.. If the one pump can’t keep Up with demand the other will automatically kick in to help .. otherwise it’s only one running

They will have separate breakers