TheGr8erG00d's latest activity
-
TTheGr8erG00d reacted to htmdude57's post in the thread Unscrewed the "DO NOT ADJUST" port from HF Jack (2 tons) - help! with
Like.
Maybe you could take it to a hydraulic repair shop? Maybe you might get lucky, and the guy would do it for you cheap or free? But he... -
TTheGr8erG00d reacted to htmdude57's post in the thread Unscrewed the "DO NOT ADJUST" port from HF Jack (2 tons) - help! with Wow.
Don't unscrew the screw under the cap that says "Do not adjust".
-
TTheGr8erG00d reacted to rlitman's post in the thread Unscrewed the "DO NOT ADJUST" port from HF Jack (2 tons) - help! with Like.
The "do not adjust screw" sets the spring pressure on the bypass. That prevents you from exerting more pressure on the ram than the...
-
TBetter too much then too little.
-
TIt's faster and if he cut it tighter, the pieces would be on the floor and he wouldn't know what to do then
-
TTheGr8erG00d reacted to mm08822's post in the thread Which AC brands to avoid ? Need advice… with Like.
While waiting for the "restart" green light is when the troubleshooting has to be performed. Did the techs actually...
-
TTheGr8erG00d reacted to Leaflessshadetree's post in the thread Difference between distilled and deionized water for auto use? with Like.
Deionized is slightly better than distilled for batteries. I don't know if the difference would be noticeable. Slightly worse than...
-
TTheGr8erG00d reacted to willf650's post in the thread The Harbor Freight PASS/FAIL Thread... with Like.
These are a fail Doyle Pump pliers I had to run some larger conduit today and my normal 10" Knipex wouldn't cover it so I busted out a...