Recent content by TMXONR

That is correct, I am running hard line from the pump, up to the factory hoses. I attached a picture of the joint and the part numbers ordered. It is just a female connector that mates to the male end of the factory hoses. The other end of the connector has threads that the 3/8 nuts and sleeve...

This forum and this thread were helpful when buying and upgrading my MaxJax lift. I have put together a video of the upgrades and modifications that I have done to improve the use of the lift. The video covers garage door opener relocation, hydraulic quick connects, wall mounted pump, and...

I lubricated inside of the channels of the column and on the lock mechanism.

Thanks! It is the chassis from Action Fab. If anyone is interested, here is a link to the build. I also have some videos of the build on my YouTube channel. https://www.pirate4x4.com/forum/jeep-cherokee/2522753-trail-buggy-xj-tomahawk-chassis-1-a.html https://www.youtube.com/user/TMXONR/videos

Thanks! The line for the column closest to the wall is approximately 25 feet from pump to cylinder. The line for the other column is about 8 feet longer. There is no noticable difference in lifting time with the longer lines. Also, both cylinders lift just as even as they did with just the...

They were showing up on my computer. I went ahead and attached them to the post. You should at least be able to see the attachments now.

Hi All, here are a few photos of my semi-permanent MaxJax install. I installed the lift last summer and up until recently, every time I needed to use the lift, I had to wheel the pump cart out and hook up the hoses. The hoses were stiff and hard to work with. The hoses also got in the way of...