Recent content by UPSHIFT

As far as the concrete edge, the slab usually runs under the walls so the 10' width is not the edge of the slab ? If it is, I'm afraid the scissor lift is the better option. :thumbup:

felchi80, Most people set the MaxJax up at 125" outside of baseplate to outside baseplate and that handles most cars that are in the 6k lb range.. I do not feel 120" (10') would be that big of a disadvantage. The scissor lift is always an option but the undercar access and ability to move it...

If I read this correctly, your only concern would be opening and closing the garage with a car on the lift. The tracks on a roll up door can be easily moved up and out of the way, be sure that can be done on the slide up door you mentioned.. Good Luck !! :thumbup:

Welcome to the GJ.. Enjoy

Also: Be sure the Cylinders are flat on the base they sit on and the Cylinder pulleys are all the way on.

:beer: Sounds like the cables are to tight ?? One cable to tight will hold the opposite side up.. If it is a chain over pulley lifting design it should have a breather vent in the cylinder so air may not be the issue. I know it sounds silly but be sure there isn't a nut or something on the...

COgarage, You are in Great Shape with a 10' ceiling.. We designed this lift for the poor guys with 8' ceilings.. :D With 10' it opens your ability to use several types of lifts on the market. You could get a 48" tall car up 68" and that is a good thing.. :beer:

Vegaman_Dan:3445472, You can add a locking hole 1/2 way between the base and the first lock and between the top lock and bottom lock. We did this early on for ceiling restricted Customers and did the load calcs to be sure the structure would not be compromised. Please email me if you have any...

Kamesama980, We always choose the nicest crowd to pick on in our business for some odd reason, that's how it always seems to work.. Murphy's law ??? :dunno: Sorry for the mishap..

I have to get back to a lot of PMs but if anyone wanted some GES stickers, they sent a bunch to us to hand out. E-mail [email protected] to get some stickers. That's our marketing kid, his name is Trevor.

Great to hear Red Goat.. I work for a Auto lift Manufacture and have been ALI/ETL testing lifts for the last 3 months so I have experimented with several bolts.. I have also pulled post out of the ground with 15000lbs and it was due to pulling the anchors up to far when they were set (at 120...

Thanks Junk !! :beer:

Anytime WDEagle !! Great Choice on the Liftmaster Purchase.. Great Product !! Thanks as Always..

Vegaman_Dan, Sorry we do not have any Covers.. Thanks for the idea, I will see what is available when the smoke clears.. Would help a lot as the Post has plenty of Grease that will pull in the dirt and dust when not in use.. I would probably approach a Company similar to the feedback from our...

Anytime mstnd !! Thank You !!