Recent content by valdivian

I'd cut away as much of the fiber board as I could and then make a form by sticking some wood in the gap and fill the divots with concrete. Take the form out after it has setup some and smooth it out even with a trowel. Quick patch or quick setting concrete should work should work. I had to do...

You don't need to remove it all. I removed the loose bits. Then I used a grinder and oscillating tool to cut the rest down below the surface of the concrete. The gaps are filled with backer rod where it all came out. And where it didn't the fiber board filled that purpose.

So I spoke with Versatile and they were extremely helpful. Basically I had to do the stem wall and floor separately for the epoxy. So I first cleaned out the joint and then filled it with backer rod and Sika SL. Then I taped off the joint and floor and did the stem wall epoxy and flake. Then the...

I'm getting ready do an epoxy floor in my garage over the Thanksgiving holiday. I'm in Los Angeles. Should have great weather. I purchased the 2-car garage kit of Rock on Roll from Versatile. They've been great thus far and I plan to call them tomorrow and ask this question, but I figured I...