Recent content by valvestud

http://www.pactool.us/snappershear/

Thanks hldtyt!

Fred, Thanks for the response. Can I get a call back related to my other issue? Thanks

Hello, I'm doing my second Wolverine application, but this part is twice the size of the last. I have the normal rounded edge stress cracks and intended to fill with the IntegraFlex product. So, got everything ready and mixed up the one gallon kit. Went immediately and began "pour". After about...

The custom mix is black, dark blue, charcoal, and white. If I did it again, I would have left out the black, but it still looks good.

OK! We have color and flakes. I spent much of yesterday coating the "re-worked" area with the BondTite. Once cured late in the day, I rented a 17" floor polisher and with a green ScotchBrite pad, scuffed up the original application of BondTite. Washed again with Simple Green solution and rinsed...

No need. These were control joints with radiused edges, not saw cuts. Joe

Hi All, Time for an update on my project. After the prep, I moved forward with application of the IntegraFlex in the control joints. I stuffed foam backer rod into any areas where cracks went all the way through the slab. I first mixed a small amount of BondTite and applied to the joints. I...

Test of shop floor pics

Well it looks like you can watch my putt first! Good luck on your project.

Hi All, Finally pulled the trigger on an order for my 330 sq. ft. 3rd car garage (shop). Going with the IntegraFlex 1921 for the expansion joints, BondTite 1101, Liquatile 1184 in gray, and EnduraShield 2254 top coat. No flakes or anti-skid for me. So far I've ground the entire floor with a...

As a homeowner who painted a pool with epoxy paint two years ago, my opinion is don't do it. I used a product called Ultra Poly One Coat. The customer service and tech support are excellent, but I don't believe any product will hold up any better than plaster. Fred from AlphaGarage may chime in...

Yes, they're low sopts. I ground mine with a 7" grinder and could get even color if I spent a long time in an area. I will acid etch before coating.