Recent content by Vte

I came across this old thread with the same question. Nothing on Snap-On website and no luck with internet searches. I got the sudden bright idea to call the technical assistance number right on the compressor, 800-231-5203. Turned out it is Sleegers, the pump manufacturer. A guy named John Hale...

Ok, just tripped on this because I would like to do it. Question, you say "grind". With what did you grind with, small or large angel grinder? What wheels were you using? Thanks much, nice floor!

Nope, sorry, the building is 46' x 60', the outside walls are 2" x 6" x 15.5' high, 24" oc, every 3rd one is doubled under trusses spaced 6' apart for the roof. I own half of the building down one entire side. I want to put up a mezzanine for seasonal stuff 18' off the back wall spanning 21' on...

I agree Firstram about 16" oc spacing and know I could do better, but again, the use is simple light storage so not too concerned about floor give. The reason for 24" oc is the outside walls are 2 x 6" x 24" oc, so I was planning on lapping to each with a ledger board underneath. Now I wonder...

I searched a bit on the forum and on net and could not find much good information. I am planning on building a mezzanine 18' off the back wall and spanning 21' from the side wall of our storage building. I would need to use a steel post to support the one corner and use the walls to support the...

Platonic Solid, any chance of helping me with my layout for lights a few posts back please? I have a rough plan included. Was planning on spacing out the tubes between every other truss under the 2x4's that tie them together. Is that a dumb idea?

I have scrolled through numerous posts on this site and am astounded by the wealth of great information. I took Paltonic Solid's advice and ordered 20 of the 48" LED's and double fixtures. What I have is a half of a 46 x 60 storage building. My side is 23 x 60 with 15' walls, a 14 x 14 garage...

Platonic Solid, are the first light and fixture suggestions on first page of this thread still the best deal in your opinion? And when I went to the link they had about 4 choices for LED light color. Which one of those choices would you go with?