Recent content by W.O.B.

This is not my add, but it is a great deal for anyone wanting Lista cabinets around East TX. The man that has them is in Gun Barrell City and wants 600 for both cabinets- https://www.facebook.com/marketplace/item/777361933361870/

Duneslider, I appreciate the information. Which systems do typically use?

Thank you for the response. The reason I ask is that I spoke to a couple of compressor shops and they both stated that the aluminum air pipe utilizing o-ring have sealing issues over time and also issues with the couplings not straying tight. One of the shops also mentioned that they have seen...

For those of you that have had the aluminum air pipe (not the tubing) for a few years, do you have any issues with leaks at the junctions, ie O-rings? I have no interest in the roll out tubing, only the pipe that is sold in 20 ft sections. I know everything is great when new, but how is it a...

10-4, thank you.

This is the specific set : https://www.homedepot.com/p/Husky-Heavy-Duty-Welded-128-in-W-x-81-in-H-x-24-in-D-Steel-Garage-Cabinet-Set-in-Black-6-Piece-HTC622020/306659737 It is the heaviest gauge they offer( that I know of).

Looking for input from anyone that actually owns then Husky HD cabinet system. The ones I am referring to are matte black with gloss black pulls/handle and are 20/18 gauge. Positives/negatives appreciated. Thank you, Bart

10-4. I knew that it had to be the loose nut behind,the wheel.

I have sent two private messages in the past few days and they do not appear in my sent folder. One message was sent from a phone and the other from a pc. Neither were utilizing the app. The recipient has not responded, so I sent myself a private message to ensure that it was working and it...

The guy that did my spray foam suggested RV slide out gasket. He stated that this is what he always uses.

Rigid forged vices are strong and cheap, at least for strong built vices. If that is too far outside the price range, you might consider the vice from Fireball Tool. It appears to be a bit smaller knock-off of the Rigid and there are some good destruction videos of it on YouTube......... Full...

I moved a 22 x 35 carport/storage building about 100 ft and back . I made several "dollies" out of 18 inch sections of 6 inch i-beam. I used one side of the I- beam channel as a cradle for the frame. I then drilled the bottom half of the channel and used round bar to make axles. I purchased 24...

I don't know if you would be concerned about this, but I was told by the Tax Appraiser that if a building is bricked/masonry then it is taxed as if it is part if the house. Any other method is far cheaper on taxes. I am in East TX, so it may be of no concern, but I thought I would offer the info...

10-4, thank you.

Thank you.