Recent content by Zmw

Thanks guys.

Is there a Sikaflex or something similar that does not smell or is no VOC?

Hi guys, This is actually a crack in the slab, indoor, my Son's bedroom. We think the crack is on the slab and not the foundation. We can actually see a piece of metal under the slab that runs the length of the crack, which leads me to believe the metal strip is some sort of control piece, to...

Thanks for the input! Any issues with using goof off professional strength as a paint remover? That is what a guy at home depot recommend rather then other paint strippers. Thanks

I believe water based, it's behr interior paint. There are several 1 ft by 1 ft stains where people smeared the paint, along with many smaller stains.

My wife runs a screen printing company for a non profit and she just moved into a new office space. The GC already sealed the concrete floor (it's actually way too smooth, very slippery) but here is her problem - Volunteer painters spilled paint all over the floor. It's a good amount of paint...

Shea, I am about to work on my parents garage and put down an epoxy floor. But, the floor is from 1970 with NO control joints. 3 car garage, maybe 700 sq ft +/-. There are 1-2 long cracks that run the course of the floor. How do I handle - literally no control joints. Should I caulk the...

I did my first garage 4-5 months ago. I used a water based epoxy as a primer - big box store stuff. Valspar from Lowes. I used a solvent based epoxy as my base coat - big box store stuff, Rustoleum professional epoxy. I used original color chips HPU 747 urethane clear coat. (note, I actually...

I have only done my 1 garage, but I used a 3 part system and it has worked great in the AZ heat (no hot tire pickup) and with a truck parking on it. 1) Primer coat - I used a water based "cheap" epoxy from Lowes. Quickrete/valspar. Thinner water based epoxy supposedly sinks into the conrete...

You can buy a respirator for $30-$50 at home depot and rent a diamondbrush grinder from there as well. Maybe $120-$150 for the rental + respirator. Call it $200 and 5-6 hrs of your time. You can wet grind it so dust is minimal. I recommend this based on my grind. Dust was everyone, but wet...

I am no expert, only having done 1 floor. BUT - why not diamond grind the floor??? Makes sense to me. You spent more money on the pressure washer then the cost of renting a diamond grinder. 5 hours give or take for a 600 sq ft garage was my experience. But it gets results! Just diamond...

I used the HD diamondbrush. my 500 sq ft garage took me 4-5 hours

Good to hear! I used the Rustoleum solvent as my base coat in my 4 coat system for my garage and so far its great

Where is the OP, Where is Fuzzy? Curious how its holding up

Looks great. I used Rustoleum professional and a urethane clear to coat on top, so far its been perfect. same color and chips on my floor. Your chip broadcast is much better then mine!