To avoid these ads, REGISTER NOW!

Between 485 & 705 SQ/FT My little hole in the wall. 24x24 attached.

Workspaces between 485 and 705 squarefeet.

badmatt

Well-known member
Joined
Dec 27, 2018
Messages
186
Location
America's hat.
I guess I can finally make a thread in here. Finding Gregor's thread on Build-threads is what originally brought me here and to join back in 2018!

So the better 3/4's and I finally bought a house together a Summer 2025. It is 2.5 acres fully treed with a 2300 sqft home from 2001 with an attached 24x24 garage about 20 minutes outside of town. Right on the river! (s m o l river) There is also a 24x16 shed on the property that's fully insulated and heated which will eventually come down when im ready to build a new shop in its place when we have money again...

7wUSqTl.jpg
OUvWbLN.jpg


The house itself was fairly move in ready, I took two weeks off of work to paint the house, redo baseboards, go through the HVAC, water tanks, address any electrical concerns and repair all the small things that the previous owners where incapable of doing correctly. My dad helped a lot during this time as a retired GC and surprisingly a rather spry man for being 72, he put in days that would bring me to my knees. you'll see his face in a few pics below.

The garage was bare studs to its current state in about 6 weeks of weekends. 24x24 9ft walls on a 6" curb. nothing crazy.. single bay IMO. Added two 20amp circuits and will be adding a 30 and a 50 amp as well. Added 3 outlets to the ceiling for 50ft chord reels, and moved the one for the opener.

Here's some pics! I still need to finish up the baseboard, window and door trim and paint the garage door.

Built two walls out to 2x6 to match the party wall and front wall. Oddly enough.. 2x6 window frame and door frame... idiot's.
K8LB6aZ.jpg
yR1Jxmw.jpg

R22 Rockwool in the walls.
VHo9pmX.jpg

Started the drywall.
Fr8ODOA.jpg
B2NzByj.jpg
d8tzxsC.jpg
EiCYoXd.jpg


Installed one of these direct drive openers.
VNay6L6.jpg

And had a ladder fail on me in the process.. supposedly fractured my wrist in 3 places.
l6KTFSv.jpg

Added 6 4x2 80w LED panels (currently set to 50w).
lj84arK.jpg
I8pHmow.jpg
yQdMDgB.jpg

Put R60 worth of Atticat in the ceiling.
zCPsiRf.jpg

Paint!
LcHE5pr.jpg
fbijDYO.jpg

And that rounds up the garage mayhem to current.

I still need to finish up a few things, and I will updating as I go.

Thanks for looking
Matt
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
B

badmatt

Well-known member
Joined
Dec 27, 2018
Messages
186
Location
America's hat.
No real crazy updates..

Finished the bare sheathed wall and repainted everything after finding a few areas I didn’t like.

IMG_3466.jpeg
IMG_3467.jpeg

IMG_3910.jpeg
IMG_3911.jpeg

IMG_3912.jpeg
Attic door will eeeeeeeventually get finished.

I finished up the door and window trim, it’s sitting on the body shop stand in primer and ready for final colour. I’ll post those pics later.

Currently spot prepping the floor for MCU. I’ll be acid washing / etching this weekend to see if it will erode the troweled areas and clean out the pad in prep. I really don’t want to rent a shot blaster at $310 a day.

Man I’m horrible at documenting this garage... And its rather pedestrian.
Cheers
 
Last edited:
OP
B

badmatt

Well-known member
Joined
Dec 27, 2018
Messages
186
Location
America's hat.
Door and window casings trimmed up and painted and installed.

IMG_4369.jpeg
IMG_4370.jpeg

Degreased and Acid washed the floor today. Utilized 20% baume muriatic from work. And mixed 2:1 to erode the trowelled surface. Seemed to work very well. have roughly a 80-120 grit surface profile. I’ll be washing the floor again before I lay down paint just to make sure the surface is free of any grease and dirt.

IMG_4371.jpeg
IMG_4374.jpeg
IMG_4375.jpeg
IMG_4376.jpeg


I’ll be filling the cracks with whatever Sherwin Williams advises for Rexthane. And then if all goes well I’ll be painting the floor next weekend. The floor is still drying out in most places. Also, my snap tack is due to arrive this week so i can mount and hide the garage door opener and sensor wiring.

and yes, every flat surface is a shelf when I have limited options.

Thanks for reading.
Matt
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
B

badmatt

Well-known member
Joined
Dec 27, 2018
Messages
186
Location
America's hat.
Decided to fill some more crack today. I had an extra tube so might as well use it. These are maybe a lil bigger than the odd hairline crack, so why not. Scraped over the epoxy to level it with a scrap piece of sheared aluminum so I have less sanding to do.

I also filled over a few of the chips again as the epoxy shrank back leaving a few low spots.

IMG_4485.jpeg

Obligatory job done beer.

IMG_4486.jpeg

Thanks for lookin!
Matt


edit: FWIW..... if you use Sikadur and plan on sanding it down to level it.... 36 grit with forced rotation or a rotary sander...
 
Last edited:
OP
B

badmatt

Well-known member
Joined
Dec 27, 2018
Messages
186
Location
America's hat.
Started this morning with a light sweep and vac. Got all my materials ready.


IMG_4526.jpeg
IMG_4552.jpeg

IMG_4553.jpeg

Painted the curbs. And started wheeling out the floor.

IMG_4554.jpeg


Coat one done. Man this stuff is rough. Even with a respirator.

IMG_4555.jpeg
IMG_4556.jpeg

Now to let the floor dry over the next 9-10 hours. Will likely do coat two tomorrow in the AM.

Matt
 
To avoid these ads, REGISTER NOW!
Top Bottom