Looking for S-K end caps

[esebm]

Hi, new here!
I have a pair of VINTAGE SK GREEN HANDLE LONG MAGNETIC BIT SCREWDRIVERS with broken end caps. The manufacturer doesn't carry them anymore and I was wondering if there are caps from other manufacturers that would fit?

 

[d42jeep]

Welcome to the GJ. A picture would likely be helpful.
-Don

 

[esebm]

Mine are similar, just a bit longer. Model # is 73517 but is no longer visible. Picture wouldn't help.

 

[geneg]

Mine are similar, just a bit longer. Model # is 73517 but is no longer visible. Picture wouldn't help.

Craftsman screwdrivers (bit holders) have the same cap. They're more plentiful than S-K. See more of them at swaps & sales. The tough part is deciding which one to keep. You'll always be at least 1 cap short. Some Snap On & Mac will also work.


I've also noticed that some of the oddball & off brand ones have funky threads.

 

[MAD]

I think A&L Handle in Pottstown PA made both the screw-in and flip top bit caps for most of the American brands, but they closed. I have a bunch of different brand U.S.A. made bit screwdrivers and the screw caps are interchangeable.

If you know someone that does 3d printing there seems to be some shared files out there.
https://www.printables.com/model/249783-craftsman-screwdriver-replacement-cap

 

[Roberts210]

I bought some S-K end caps in the 90's from S-K for my green handled screwdrivers that I bought new in 1978. I might have an extra one. Let me look and see. It might take me a day or two.

 

[four.cycle]

I have a "KR TOOLS" driver that may possibly fill the bill. It appears to have an outer thread diameter of 45/64".

 

[Roberts210]

I struck out. I must have used them.

 

[esebm]

45/64" sounds about right.

 

[four.cycle]

^ if you're in the continental US, it'll cost me about .... $7 bucks to put that in the mail to you. let me know if you want to give it a shot.
I don't believe I've ever had one of those S-K units here, so I can't even guess if this is close.

 

[alinc100]

while a slightly different top profile ,I've found these to work: https://www.newegg.com/unique-bargains-a15082600ux0342/p/0FB-00MU-00FC1?Item=9SIA27C3TY1193

 

[esebm]

Hi Guys, sorry for the delayed response. I've been out of pocket for while.
However, I found a solution. I reamed out the hole nicely and whittled a joining biscuit into shape and glued it in.
Looks nice and it works.
Thanks for your input.

 

[PFSard]

Hi Guys, sorry for the delayed response. I've been out of pocket for while.
However, I found a solution. I reamed out the hole nicely and whittled a joining biscuit into shape and glued it in.
Looks nice and it works.
Thanks for your input.

Just out of curiosity. I'd like to see a picture or two of that solution.

 

[esebm]

Here's a pic. Not beautiful but it works.

 

[Unk]

Brownell's sells replacement caps. I have bought a couple, and can confirm they fit on Stanley and Apex (and a couple of no-name) hollow handle bit storage screwdrivers. BROWNELLS MAGNA-TIP #84 Hollow Handle Cap, White | UPC: 050806007956

 

[Cruzan80]

Link doesnt work. Try this, below. Looks like 2.99 each, with standard shipping running $7.99 (even for a few).

BROWNELLS MAGNA-TIP #84 Hollow Handle Cap, White SKU: 080087001

Check out BROWNELLS MAGNA-TIP #84 Hollow Handle Cap, White SKU: 080087001 with 42 reviews and an overall rating of 4.7, available Online at Brownells Today and many more Screwdrivers & Sets products are available in our Tools & Cleaning Department.

www.brownells.com

 

[Shelbylex]

Please let us know if it works for SK if you buy Brownells

 

[sk farmer]

not currently missing any myself but have seen many missing the caps.


i would think someone who took the time should be able to copy one and print a few. not my area of expertise but i would think it could be done.

 

[Unk]

Link doesnt work. Try this, below. Looks like 2.99 each, with standard shipping running $7.99 (even for a few).

Thanks for fixing that.

 

[Unk]

The caps from Brownell's work on these three.....