2manytools
Well-known member
Might need to order this if you don't have the inflator for $137
Milwaukee Power Tools Deal Permathread
- Thread starter a52-830
- Start date
Might need to order this if you don't have the inflator for $137
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,365
Out of stock already. They had about 2500 available this morning around 0700 EST and sold out around 1100 EST.
Was a great deal for someone who wanted to get into the M12 line with the basics, but I already had all these tools (x2), so good luck to whoever got mine
.Compressor combo is still available but it is up to 250$.... Just got notification mine shipped out, hopefully it is complete. Really frustrating when they mess up the shipments and omit items.Out of stock already. They had about 2500 available this morning around 0700 EST and sold out around 1100 EST.
Was a great deal for someone who wanted to get into the M12 line with the basics, but I already had all these tools (x2), so good luck to whoever got mine
Odd-job
Well-known member
Woot has some Milwaukee on sale.
tools.woot.com
The m12 surge kit and m12 inflator look like good deals with the extra 15% off layered on top.
Toolbox Fave: Milwaukee!
Use code TOOL15 at checkout for an extra 15% off items in this sale! Limit one use per customer.
tools.woot.com
The m12 surge kit and m12 inflator look like good deals with the extra 15% off layered on top.
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,365
Woot has some Milwaukee on sale.
Toolbox Fave: Milwaukee!
Use code TOOL15 at checkout for an extra 15% off items in this sale! Limit one use per customer.
The m12 surge kit and m12 inflator look like good deals with the extra 15% off layered on top.
Does anyone have the M12 inflator? Is it any good?
I know I know, get the M18 version, but I don’t need another tool ecosystem and I’m already in M12 heavy.
Punkinhead
Well-known member
- Joined
- Nov 19, 2011
- Messages
- 71
I have both the M12 and M18. Both work fine but obviously the M18 is faster.
2manytools
Well-known member
I would pick up an M12 if was getting it under $75. Otherwise, I'd go the M18 route. Besides longer hose, and will recheck PSI after inflating then re-evaluate further inflating or not, it will fill a tire with its bead not set. I know the M12 wouldn't have filled my spare when I really needed it. For that alone, is why I keep the M18.
The M12 was slow enough that I would 'set it, and forget it' like a Ron Popeil chicken rotisserie machine, and I would end up towing it a few tire revolutions before remembering. All 3 still inflated, but did lose a piece of the roll cage / handle. Wish they added an audible beep after completing
mngundog
Well-known member
I had the m12, it worked great for topping on tires, it got passed onto my son when he moved, maybe 10 years old, still working as far as I know, gave one to my father as well. Have the m18 now, works the same just faster. They both are great.
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,365
Crabman
Well-known member
@Steel_Rain
If you need to fill 4 big truck or trailer tires, get the M18. I have one (well maybe more...).
The M12 will get hot and you will have to let it cool off for a while with this type of use.
For topping off bigger tires, lawn tractor, hand truck, wagon, wheelbarrow, generator, smaller trailers, etc. the M12 works great and it is lighter and easier to grab. I use mine all the time. My OCD usually dictates topping everything at least in the spring and usually in the fall. It is fine for that purpose.
If you need to fill 4 big truck or trailer tires, get the M18. I have one (well maybe more...).
The M12 will get hot and you will have to let it cool off for a while with this type of use.
For topping off bigger tires, lawn tractor, hand truck, wagon, wheelbarrow, generator, smaller trailers, etc. the M12 works great and it is lighter and easier to grab. I use mine all the time. My OCD usually dictates topping everything at least in the spring and usually in the fall. It is fine for that purpose.
67King
Well-known member
The small 2.0A-hr batteries on sale for $26 at Walmart Link to walmart
Woot has 15% off select Milwaukee stuff - the deals are luke warm, nothing fascinating
If you can't wait until the holidays, this may be the right time
Bare in mind, prices on TTI stuff are creeping up in the next several months due to an increase in copper prices set forth by China
If you can't wait until the holidays, this may be the right time
Bare in mind, prices on TTI stuff are creeping up in the next several months due to an increase in copper prices set forth by China
Odd-job
Well-known member
m18 18 inch fan is $219 @ ACE hardware - I am finally biting. Just got the spot blower too with 2X points and 15% off coupon "ARD26"
www.acehardware.com
Milwaukee M18 26.5 in. H X 18 in. D 3 speed Cordless Jobsite Fan Mfr# 0821-20 - Ace Hardware
The Milwaukee M18 Brushless 18 Fan delivers corded performance anywhere on the job site, providing air circulation over 50 ft. and up to 13.5 MPH. The 18-inch blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base...
www.acehardware.com
2manytools
Well-known member
Well my dyslexia skipped around your post, and was hoping for the 15% off the fan. Guess I'm going to have to find a Home Depot that still has their meet and beat sign still hangingm18 18 inch fan is $219 @ ACE hardware - I am finally biting. Just got the spot blower too with 2X points and 15% off coupon "ARD26"
Milwaukee M18 26.5 in. H X 18 in. D 3 speed Cordless Jobsite Fan Mfr# 0821-20 - Ace Hardware
The Milwaukee M18 Brushless 18 Fan delivers corded performance anywhere on the job site, providing air circulation over 50 ft. and up to 13.5 MPH. The 18-inch blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base...
Odd-job
Well-known member
would have been nice if they stacked, but 20% off the fan is about the best I have seen and have been waiting a while.Well my dyslexia skipped around your post, and was hoping for the 15% off the fan. Guess I'm going to have to find a Home Depot that still has their meet and beat sign still hanging
assassin10000
Well-known member
- Joined
- Feb 11, 2022
- Messages
- 375
If you want the subcompact m12 drill, home depot has it for a few more hours for $70
Last edited:
tmshort
Well-known member
comes up unavailable when I click the link.
assassin10000
Well-known member
- Joined
- Feb 11, 2022
- Messages
- 375
m18 18 inch fan is $219 @ ACE hardware - I am finally biting. Just got the spot blower too with 2X points and 15% off coupon "ARD26"
Milwaukee M18 26.5 in. H X 18 in. D 3 speed Cordless Jobsite Fan Mfr# 0821-20 - Ace Hardware
The Milwaukee M18 Brushless 18 Fan delivers corded performance anywhere on the job site, providing air circulation over 50 ft. and up to 13.5 MPH. The 18-inch blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base...
I DEFINITELY want to know how you like it after trying it out!
Mike
Odd-job
Well-known member
Sure will post in the Addiction thread once I have some time using it. Knowing my luck HD will start blowing these out. Saw a pretty long row in the fan section with not many takers at the retail price.