M.Brane
ALLIANCE MEMBER
That looks good! IME spraying paint is easy when the prep work is good even with rattle cans. That's what I used on this:
Between 265 & 485 SQ/FT The "Glendora Garage"
- Thread starter Dan in Pasadena
- Start date
Workspaces sized between 265 and 485 squarefeet.
OP
Dan in Pasadena
Well-known member
Yeah, that looks excellent. Congrats.That looks good! IME spraying paint is easy when the prep work is good even with rattle cans. That's what I used on this:
I've been told to keep wax on it constantly as spray can paint is non-catalyzed and just isn't hard compared to factory paint.
OP
Dan in Pasadena
Well-known member
Some activity here:
Finally, red paint on the footlocker project. I'm not overly happy with it. it's much rougher than the prior one I did but as Kay says it's a knock around truck bed box. It'll get a final sand and final coat. That'll have to be good enough. The corners on this thing are pretty rough. The angle iron around the top hides a lot of that. I wire wheeled it, hammered it flat, sprayed silver and it looks ok. I've done nothing to the interior. yet It'll be sprayed with truck bedliner. Then hinges, handles, etc. I won't post a pic of this wavy surface.
Finally, red paint on the footlocker project. I'm not overly happy with it. it's much rougher than the prior one I did but as Kay says it's a knock around truck bed box. It'll get a final sand and final coat. That'll have to be good enough. The corners on this thing are pretty rough. The angle iron around the top hides a lot of that. I wire wheeled it, hammered it flat, sprayed silver and it looks ok. I've done nothing to the interior. yet It'll be sprayed with truck bedliner. Then hinges, handles, etc. I won't post a pic of this wavy surface.
OP
Dan in Pasadena
Well-known member
The Fiat 500 "toad" has some flaking clear coat but fortunately only on the leading edge of grille below hood. Because the mirror came out nice I'll use the remaining paint to TRY to improve that area. I'm not sure about blending it in with the rest of the paint.
The break at the hood and even a body line below is where I'll try to blend .....but on the sides I expect the repair to show. Oh well. Not sure I have enough paint to do the entire grille. But it's a thought.
The break at the hood and even a body line below is where I'll try to blend .....but on the sides I expect the repair to show. Oh well. Not sure I have enough paint to do the entire grille. But it's a thought.
OP
Dan in Pasadena
Well-known member
Just found out from neighbors there’s a mini 4th of July parade actually thru our residential street tomorrow AM. No Idea why the city isn’t holding one through the “Village” area. Oh well. Last second dressed my truck for it. 
OP
Dan in Pasadena
Well-known member
Found some gel “Clings” and they were a total PITA to make stick.
Ford52PU
Well-known member
Truck looks so good! Enjoy
PugetDude
ALLIANCE MEMBER
Lick 'em and stick 'em...Found some gel “Clings” and they were a total PITA to make stick.
kaymccampbell
Well-known member
And after a hot day or two, they'll be a total PITA to remove.Found some gel “Clings” and they were a total PITA to make stick.
OP
Dan in Pasadena
Well-known member
Ewww…..ha ha
turbowoodworker
Well-known member
Very nice look Dan. Proud country, proud truck.
OP
Dan in Pasadena
Well-known member
They’ll be off the truck the minute the event is over. There’s an “eagle” with “250” on the tailgate. But since the gate isn’t flat it didn’t want to adhere well. Didn’t transfer cleanly so we had to do it by hand. The pieces got stretched and it’s almost comical how it came out. I expect to go outside and see 1/2 of its fallen off!
OP
Dan in Pasadena
Well-known member
A couple pics from this mini neighborhood shindig. I know the guy with the '40 Ford. Very nice guy, early 80's, widower. He stopped by my house a year ago with a friend because he saw my truck in the garage. Hadn't spoken to him since. The other guy; his friend passed away suddenly. Sad.
Jayman17
Well-known member
Some nice rides in that parade, Happy 4th Dan!
OP
Dan in Pasadena
Well-known member
Thank you. I hope everyone had a happy and safe one.