Add Interlock to panel or bite the bullet and upgrade?

[mm08822]

Looks like you have stabs upper right for a 2-pole breaker.

Also have 2 stabs bottom row.

Easy.

No stabs on the bottom that l can see. ??

However, that makes a 34 space panel which IMO is a unicorn.

 

[mm08822]

So you need a horizontal interlock not the vertical style previously mentioned.

 

[larry4406]

No stabs on the bottom that l can see. ??

However, that makes a 34 space panel which IMO is a unicorn.

Yeah my bad. Just looked again more carefully.

 

[larry4406]

So you need a horizontal interlock not the vertical style previously mentioned.

Op could move breakers for a left side vertically stacked interlock.

Use the upper right unused stabs.

 

[mm08822]

Yeah my bad. Just looked again more carefully.

Mean while the cover has that row as "available" spaces.

 

[wyliesdiesels]

since were on the topic of incompatible breakers, that 50a range breaker is not a Bryant IIRC.

 

[kaehlin]

Thanks all for your advice. I'll contact my electrician about an interlock and inlet.

since were on the topic of incompatible breakers, that 50a range breaker is not a Bryant IIRC.

Is that a potential issue that should be addressed?

 

[dave*99]

Seems those red wires on the left are for MWBCs? If so, handle ties would be nice.