What is the yellow one?I have a 26 x 56 attached shop/garage. In the past ten years besides many small projects, I built these two cars and painted them in it.
It's unique and cool in a sea of Chevels
What type of shop do you have?
- Thread starter jmiller_2308
- Start date
It's unique and cool in a sea of Chevels
Slednut
Well-known member
M.Brane
ALLIANCE MEMBER
I don't do a lot of woodworking, but occasionally. Mostly metalwork, and vehicle stuff. Messy jobs are done on the patio behind the 20x20 garage to minimize dust.
MichaelP
Well-known member
Mostly, machining, some metal fabrication and general stuff. A bit of basic woodwork.
All machinery is spread over former 2.5 and 4-car garages (boat is kept there, but no space for cars except for emergencies).
All machinery is spread over former 2.5 and 4-car garages (boat is kept there, but no space for cars except for emergencies).
Hooked
Well-known member
And I'm reminded of that frequently.
24X32X10 pole building, a little bit of everything.
Woodwork, Metal work, vehicle/tractor/lawn equipment repairs, Fallout shelter
Not nearly big enough to be set up well for everything, but i'm making it work.
Much better than working in a gravel driveway in wintertime.
Previously was working out of a 10'x12' storage shed, which made everything done outside in the yard. .
Setup and takedown times made working on anything an ordeal, Drag out the tools, do the work, and put everything back
Wish shop was bigger, but it is extremely nice to be able to work on things in a climate controlled shop.
Heat, AC, Internet/TV and beer fridge round out the amenities.
Woodwork, Metal work, vehicle/tractor/lawn equipment repairs, Fallout shelter
Not nearly big enough to be set up well for everything, but i'm making it work.
Much better than working in a gravel driveway in wintertime.
Previously was working out of a 10'x12' storage shed, which made everything done outside in the yard. .
Setup and takedown times made working on anything an ordeal, Drag out the tools, do the work, and put everything back
Wish shop was bigger, but it is extremely nice to be able to work on things in a climate controlled shop.
Heat, AC, Internet/TV and beer fridge round out the amenities.
WisJim
Well-known member
My current building was sized to the maximum allowed on the lot we are on, and is 24x40 overall. One car garage space, a woodworking space, and a metal shop with lathes and mills. A stairway to the upstairs takes 3 feet between the two shop spaces. Upstairs is a room for my wife's looms etc., and a room for my extra books and back issues of magazines.
jblnut
ALLIANCE MEMBER
My farm shop is a bit of an everything space. It currently is housing my combine while it’s getting more in parts stuck into it than it’s worth.
Thanks to @bugnut I now have a lathe and Bridgeport so I should be able to build about anything I can imagine.
We’ve got a hangout room upstairs and try to do a family movie night for sure once a week.
It hasn’t been this empty for years lol.
Definitely more metal projects than wood happen in here.
The occasional nerd thing happens in the office. This was prepping for a dozen workstations to get sysprep images.
Many things a year get some love.
We also throw the occasional shin-dig complete with a buffet.
Thanks to @bugnut I now have a lathe and Bridgeport so I should be able to build about anything I can imagine.
We’ve got a hangout room upstairs and try to do a family movie night for sure once a week.
It hasn’t been this empty for years lol.
Definitely more metal projects than wood happen in here.
The occasional nerd thing happens in the office. This was prepping for a dozen workstations to get sysprep images.
Many things a year get some love.
We also throw the occasional shin-dig complete with a buffet.
SouthernIllinois
Well-known member
- Joined
- Jan 14, 2024
- Messages
- 1,704
Retirement sheds
1. Beer drinking area
2. Family get togethers
3. Shop for project (1985 F150, short bed, 302, 4WD)
4. Parking for daily drivers and John Deere Gator
5. Big Wheel riding area for my wife's niece and nephews
6. Smaller on is for lawn **** storage
1. Beer drinking area
2. Family get togethers
3. Shop for project (1985 F150, short bed, 302, 4WD)
4. Parking for daily drivers and John Deere Gator
5. Big Wheel riding area for my wife's niece and nephews
6. Smaller on is for lawn **** storage
JasonMcElroy
Well-known member
My shop…plus a few toys…
Your shop is my dream shop.
We also live in NorCal but have five more years in San Jose until kids are out of school. Then it's up to the mountains.
I want a BIG *** shop with some lot space outdoors for all the motorcycles, trucks, and a camper.
I remember seeing pics of your place (above) long ago and thinking the view is phenomenal. Plus, my son and I like to fish ;-0
Nice spot.
Jason
OP
jmiller_2308
Well-known member
24X32X10 pole building, a little bit of everything.
Woodwork, Metal work, vehicle/tractor/lawn equipment repairs, Fallout shelter
Not nearly big enough to be set up well for everything, but i'm making it work.
Much better than working in a gravel driveway in wintertime.
Previously was working out of a 10'x12' storage shed, which made everything done outside in the yard. .
Setup and takedown times made working on anything an ordeal, Drag out the tools, do the work, and put everything back
Wish shop was bigger, but it is extremely nice to be able to work on things in a climate controlled shop.
Heat, AC, Internet/TV and beer fridge round out the amenities.
Aside from my shop being stick built and attached, your description couldn't have described my life any better.
38Chevy454
Well-known member
About 70% automotive workspace, parts and parking; 10% metal working; 10% for house repairs and projects; 5% for the half bath and washing sink; and final 5% for lawn and yard equipment. I try to do all woodcutting outside, then any assembly inside. Not a high precision woodworker, just building shelves or fixing wood pieces.
Yeah, I always had big plans for a retirement shop with everything needed to do whatever I decided I wanted to do. Machine shop/welding/fabrication/auto/truck/tractor/woodworking/blacksmithing...and likely a few endeavors that I haven't thought of yet. Started looking at where I was at, and where I wanted to be. Came to the realization that if I waited to get everything i wanted, I was going to be too old to use it. Didn't want to commit to six figures for the building, and at least that much to equip it.
In 2016, Started looking at pole barns, and figured I could make it work. Originally wanted a 30x40, but siting issues made it difficult. Wound up with a 24x32, that seemed to fit nicely on the lot. Way smaller than the original idea, but big enough to get me out of the 10x12 shed that I was using to store my tools. Was able to get it built, building, concrete/site work, permits, and materials for heat/AC, lights/wiring, insulation, under 30k with the wiring. Did the heat/air, wiring, insulation, myself. Still a work in progress, but far enough along to allow me to use it. Still have big dreams, but your reach should always exceed your grasp. Still have a few years before retirement but I will get there.
Don't wait too long....
In 2016, Started looking at pole barns, and figured I could make it work. Originally wanted a 30x40, but siting issues made it difficult. Wound up with a 24x32, that seemed to fit nicely on the lot. Way smaller than the original idea, but big enough to get me out of the 10x12 shed that I was using to store my tools. Was able to get it built, building, concrete/site work, permits, and materials for heat/AC, lights/wiring, insulation, under 30k with the wiring. Did the heat/air, wiring, insulation, myself. Still a work in progress, but far enough along to allow me to use it. Still have big dreams, but your reach should always exceed your grasp. Still have a few years before retirement but I will get there.
Don't wait too long....