AMGO OHX-10H Lift review/install

[JoshS]

@dante2 Yep not much room to the ceiling but this lift was on my list of possibilities when I was planning the shop, 13' side walls were as high as I could go with the zoning without a variance so I'm glad I did the pitch on the ceiling as that gave me just enough room.

@gizardlizard Might just be the pictures, there is 3'4" from the wall to the outside of the post and that gives me plenty of room to work. Better angle

 

[dante2]

Damn your post is close to the wall. Do you actually have enough room to bend over to pickup a wheel without twisting your body?

My post is a lot closer than his is to the wall. In hindsight I would have started with the door opening over a foot more. I am skinny so I manage and I have successfully pulled an axle with the limited space I have.

 

[jeep_n_hog]

Can you send me a picture of your lift column that is close to the wall? I'm shopping for a lift, but am afraid I'm short on floor space in width, with the need to also store a vehicle next to it. I don't do axle work, so rotating tires, brake and suspension work, etc, would be about it. I'm considering slamming a column fairly tight to one wall to give me as much room on the opposite side as possible.