It'd probably get through eventually, but might be worn out afterwards. I had to throw that pic in there!Oh look! A hole saw! I wonder whether that'll go through some iron beams...
Above 1200 Sq/FT Jumpman-Z 50x60 Dream Shop and Office Build
- Thread starter Jumpman-Z
- Start date
Wokspaces above 1200 squarefeet.
rmack898
Well-known member
Great pictures and documentation. I'm following along.
Jon69RagTop
Well-known member
- Joined
- Jan 23, 2014
- Messages
- 58
Looking forward to the results of your lighting choice. That’s something I’d like to improve on in my garage.
September 14 - I picked up a small Rheem 20 gallon water heater and also the sink I ordered came it. This will be more than enough for my needs.
My sink also came in the before. I bought a Trinity 30" x 14" stainless steel sink, model CTHA-0323. At $369, Costco had the best price for this one by $200+ if I remember correctly, and free shipping. I don't have a membership as the nearest store is about 120 miles away, but I learned that you can still make purchases for a 5% fee. Still a good deal. Hopefully we get a store at some point!
None of this stuff will be installed until insulation and flooring are tackled.
My sink also came in the before. I bought a Trinity 30" x 14" stainless steel sink, model CTHA-0323. At $369, Costco had the best price for this one by $200+ if I remember correctly, and free shipping. I don't have a membership as the nearest store is about 120 miles away, but I learned that you can still make purchases for a 5% fee. Still a good deal. Hopefully we get a store at some point!
None of this stuff will be installed until insulation and flooring are tackled.
September 18-20 - All of the lights have been mounted. For now, just the first two rows are wired up, as I'll need more electrical work at the rear of the building for an office that I plan to build later. Even without the last row, these lights are super bright! After being in the shop for a while and returning to the house, my eyes need a little time to readjust to dimmer warm lighting. If you get these, I highly recommend putting them on dimmer switches.
Time to connect the water to the shop, and tie in to the septic. Digging up the capped ends.
Tying into the septic.
This line ties into the water line supplying water to the water heater. It was wrapped in insulation before backfilling. They added a shutoff valve just in case
Unfortunately accessing the water heater meant cutting some drywall. The cut drywall was replaced, but I'll have to make it pretty at some point.
Time to connect the water to the shop, and tie in to the septic. Digging up the capped ends.
Tying into the septic.
This line ties into the water line supplying water to the water heater. It was wrapped in insulation before backfilling. They added a shutoff valve just in case
Unfortunately accessing the water heater meant cutting some drywall. The cut drywall was replaced, but I'll have to make it pretty at some point.
Last edited:
September 30
I decided to buy a 6-foot scaffold for some work I'll be dong in and around the shop later. I was shocked that it actually fit in my Honda Element with the front and rear passenger seats folded. I did measure ahead of time, though (didn't want to be THAT customer). This car has a surprising amount of space.
I decided to buy a 6-foot scaffold for some work I'll be dong in and around the shop later. I was shocked that it actually fit in my Honda Element with the front and rear passenger seats folded. I did measure ahead of time, though (didn't want to be THAT customer). This car has a surprising amount of space.
Last edited:
Sorry, I got busy with life and didn't get to continue posting the shop progress, but getting back on it now.
October 2-7 - Sectional Doors
Originally, these were scheduled to be installed the previous week, but the company I hired had to reschedule. Originally what was planned for a 1-2 day installation became more like 4 days. Nice guys, but they were not very interested in working. Between a broken welder, very long lunch breaks, and not having the right equipment, this job took much longer than expected. I also had to get a remote reprogrammed. In the end, the work was completed and the company did make things somewhat right in the end (after some complaining), but this part left me a little annoyed.
October 2-7 - Sectional Doors
Originally, these were scheduled to be installed the previous week, but the company I hired had to reschedule. Originally what was planned for a 1-2 day installation became more like 4 days. Nice guys, but they were not very interested in working. Between a broken welder, very long lunch breaks, and not having the right equipment, this job took much longer than expected. I also had to get a remote reprogrammed. In the end, the work was completed and the company did make things somewhat right in the end (after some complaining), but this part left me a little annoyed.
Attachments
Last edited:
October 8-9 -Foam Insulation
Finally time for insulation. This was the final work needed before I could move any stuff in. I decided to go with the company of guy I met at the gym. They sprayed 1 inch of closed cell insulation. They could paint the insulation any color I wanted, but I chose to go with a gray. I felt like white would get dirty quickly, and black didn't really suit the theme I wanted.
The first 8 feet was left unpainted, as I will be covering those parts of the walls with plywood. That cut down the original quoted price a little bit, and I still have an extra bucket of paint should I need it for repairs and touch ups. I highly recommend getting any visible insulation painted, as this stuff doesn't take very long to start yellowing.
The entire process took about 1.5 days, with most of the work accomplished on day one. The second day was just touch-up and clean-up.
Side note: If you have this work done, make sure you mention anything that you don't want removed or cut. One of the workers cut the Ethernet cable that I was running from the house, which was really annoying, but it wasn't too big of a deal to fix. Overall I was very happy with the work.
The prep work. Everything not intended to be covered was masked. That includes light fixtures, outlets, doors, and garage hardware. The wiring was sprayed over, which I recommend for aesthetic purposes and protection.
The Shervin-Williams truck arrived right on time with the paint. I didn't even realize they did deliveries. The insulation company took care of getting the paint.
Starting to spray:
The insulation cured very quickly. Once enough coverage was made with insulation, another crew member began painting while the other continued to spray foam.
Finally time for insulation. This was the final work needed before I could move any stuff in. I decided to go with the company of guy I met at the gym. They sprayed 1 inch of closed cell insulation. They could paint the insulation any color I wanted, but I chose to go with a gray. I felt like white would get dirty quickly, and black didn't really suit the theme I wanted.
The first 8 feet was left unpainted, as I will be covering those parts of the walls with plywood. That cut down the original quoted price a little bit, and I still have an extra bucket of paint should I need it for repairs and touch ups. I highly recommend getting any visible insulation painted, as this stuff doesn't take very long to start yellowing.
The entire process took about 1.5 days, with most of the work accomplished on day one. The second day was just touch-up and clean-up.
Side note: If you have this work done, make sure you mention anything that you don't want removed or cut. One of the workers cut the Ethernet cable that I was running from the house, which was really annoying, but it wasn't too big of a deal to fix. Overall I was very happy with the work.
The prep work. Everything not intended to be covered was masked. That includes light fixtures, outlets, doors, and garage hardware. The wiring was sprayed over, which I recommend for aesthetic purposes and protection.
The Shervin-Williams truck arrived right on time with the paint. I didn't even realize they did deliveries. The insulation company took care of getting the paint.
Starting to spray:
The insulation cured very quickly. Once enough coverage was made with insulation, another crew member began painting while the other continued to spray foam.
Last edited:
