To avoid these ads, REGISTER NOW!

Above 1200 Sq/FT The Action Sports Garage

Wokspaces above 1200 squarefeet.

Johanfpa

Well-known member
Joined
Dec 27, 2016
Messages
247
Location
Aberdeen Scotland
Even with these solid floors your main vibration problem would still be low frequency vibrations and I don't think the "air spring rubber pucks (not sure about the air spring part tbh, would call and ask them)" will do this but the shock absorbing spring vibration damping mounts should cancel out the low frequency vibrations.
 
To avoid these ads, REGISTER NOW!

Dig Doug

Well-known member
Joined
Apr 16, 2018
Messages
1,166
I think I would built a custom size pallet and make it Heavy Duty
to be used w/ a pallet jack

then add some pallet cushions below it

be nice to be able to move it around in the future…

I’ve used these cork pads on a screw drive IR compressor on a wood mezzanine before worked well for 4-5 years

Cork pads
IMG_4394.pngIMG_4395.png
Pallet cushions

IMG_4393.png
 
To avoid these ads, REGISTER NOW!
OP
G

Grant Gunderson

Well-known member
Joined
May 17, 2013
Messages
2,356
Location
Bellingham, WA
IMG_0378.jpeg
Sparkies have been mia, but the plumbers have been here last 2 days. They opened up the under floor to run the drains. Check out this floor structure! That’s old growth 3x12 measures 4x12 beams on 12” centers! Then cross braced. That’s sitting on 12” old growth Doug fir post and beams. Place was built by the local timber baron back when he had the largest saw mill in the world.
IMG_0381.jpeg
They ran a 3” drain all the way to the other end of the building. I’ll be taking over this storage room soon.
IMG_0387.jpeg
It terminates here into a back flow preventing valve before headed to the street.
IMG_0388.jpeg
Plumber said he was an apprentice when this got put in. Said he’s going to clean it up but I won’t be on this line. We have to have a dedicated metered line as we are technically a separate address so we will get an instant hot water heater.

I had them add a floor sink to plumb the compressor drain into and to drain the ski tunning equipment and will have a spigot for filling the tunning machines.
IMG_0373.jpeg
Did a father son weekend in Sun Peaks with Stian. He’s sending it. This is one of the smaller jumps he’s doing and it’s 15’ from take off to landing. Most adults were not clearing it. He was boosting 6’ off deck on the more poppy jumps. So I need to invest in a new full face and probably a neck protector for him. The new carbon Sentinel made him go from liking biking to loving it and not wanting to stop!
IMG_0389.png
We did just under 90 miles in 2 days. My arms were beat! Didn’t do a lot of variety tho. He found the combination of jump trails he liked best and we just lapped the **** out of them. Personally I’m more into steep tech, but I’m all for repetition at the bike park with him so he gets dialed jumping. I know I can’t stop him from sending it on jumps. so best thing is to teach him how to properly and safely build skills to learn how to safely build up to bigger features. I’m a strong believer repeating the same stuff over and over till it’s 100% then move on to the next larger set.
 

Xti04

Well-known member
Joined
Nov 11, 2016
Messages
2,499
Awesome ride Grant! My youngest son woke me up at 7 am Sunday to go for a ride. We did like 3 miles or so of greenway, nothing crazy but I was just glad to get out. ***** I havent been out on my mtn bike in a while and even the dropper post needs serviced now.
 
To avoid these ads, REGISTER NOW!
Top Bottom