Search results

Lookin' good!

Yeah, It is said that this Lift is the one for Toyota's at dealerships. Even though I going to check the possibility of putting an additional 24" across the top.

No, it is the normal lift where the posts face each other. Now there is a bridge that connects the two at 12' high. I know that would have to add a section to make up the 24" bridge to be 12' not 10'. The cables might have enough slack for the 2'??

I've got a " Forword 7000" 2 post lift bought from a Toyota Dealership. The problem is that it is too narrow. It's 10' wide and when I center it for a full size car or Truck you are too close to the upright post. You normally have to put it into neutral and push it forward. That's not too bad...

Hello, Kinda new at this, I've found a great use for the Scissor jack. Get a piece of 3/4 or 1" plywood around a foot or so wide, 2 or 2 1/2 long. Three bolts one 2"x 3/8, 2- 1 1/2" x 3/8, 3 nuts and washers as you see you need them. 1 piece of 2x4 or 1 1/2 x 1 1/2 . Drill thru the 2 by then...

Depends on what kind of stress you will putting on it , how many holes and if it is going to be on a movable item. I've done many such projects on Coal Mining Power centers and have done well but they on a stationary object. If you are able to use the pop rivet style nut that leaves a not on the...

I've not had any luck with my V-Twin pump. One cylinder just won't pump very good. I've took it apart and it looks fine. Re positioned the rings but no good. I may have mixed up the plates that hold the Reid valves but unless the 1 jug has been rotated 180 and made a problem there?? I'm going to...

First off I can't believe the price now, I bought mine 6 yrs ago, give or take a year. Mine was less than $10.00 and couldn't believe it. Now it's around $90.00. Mine did go bad last year and put batteries in it but won't work after it goes back together?? It is gust the neatest tool, got to try...