Search results

Need some advice on selecting the proper start capacitor for a 120v, 1/3HP motor. Similar motors listed on Amazon call for 5mfd, 377v capacitor; the existing fan motor has a 6mfd, 377v capacitor. The fan motor in my auto shop has a 14mfd capacitor. Is the difference significant? Is there a...

It's an 8 HP L head engine (19G432) mounted on a Northern Tool logsplitter. Starts fine but surges at all speeds with or without load. The engine, while 10years old, does not have much time on it. So far, I've drained fuel tank, replaced all fuel lines, disassembled and cleaned fuel pump and...

The lift is lightly used and has an assortment of fixed and adjustable lifting pads. I haven't used it since I built my separate shop and installed a Bend-Pak two post lift. Reasonably priced at $650.00, it's located in Jefferson GA. Phil

One either side of my mid-rise lift were 16' 2X10's that I left in place permanently. Solved the problem with low ground clearance cars easily. Now I'm running into the same issue with my BendPak XPR10AC and the solution isn't so simple. I'm thinking about a double layer of 3/4" plywood about...