Search results

I recently bought a HF blast cabinet and it came with one film applied and 2 extras but they do not sell replacements. What are you guys using to protect the windows of your blast cabinets? I did see tptools sells replacement films for like $8 for 3, I know there has to be some great almost no...

Has anybody tried any of the new air tools? I am most interested in the slim right angle die grinder, it is a sharp looking tool. -Dan

I have 2 of these cans (Matco and Zep) and they are great but I am wondering who makes them? -Dan

What is the acceptable line voltage from the power company? I am currently getting 244 and 122. Which would not be a problem but it is causing an over current draw on a motor I have that is running off a step down transformer. -Dan

I am not done yet but I thought I would share some pictures of the coolant tank I welded up yesterday. The tank was made from a piece of 6 in ID aluminum tube 26.5" tall that was laying around, it has some heavy pitting but no holes through and it was free. I added 3 NPT bungs to the side and a...

I know i found this picture on here some time ago, but never found out any more info on it. If someone knows who this belongs to I would love to see more pictures of it. -Dan

Lincoln Idealarc 250/250 welder. 15' TIG torch lead, stinger lead, GROUND lead and foot control. Plenty of extra cups and collets plus a couple tungstens. She works great, very powerful. 208-220-240-480 single phase. I kind of feel bad for spending the money but I have already been told it is...

I just aquired a Northstar 2000 R12 reclaimer, but I can't seem to find any info about them. Does anybody here know anything about it? It is a rather large unit (compared to the current ones I have seen). I know almost nothing about these but I would love it clean it up and convert it to 134A if...

I usually weld a nut on or drill out broken off bolts but I have 2 that I think an extractor would work best on and was looking at the Irwin Multi spline extractors. Found Here Anybody got anything good or bad to say about HOW THEY PERFORM? Thanks, Dan

I have wanted a parts washer for a while but could not justify the dedicated space they take up or the price to invest in one. My dad gave me one of the Northern Tools bench top specials but the pump died while cleaning it up. After many months of pondering parts washers I stumbled upon an air...

Does someone know the specs of a Mac AW4300? I picked one up about a year and a half ago and have never been able to find the specs. Thanks, Dan

Anybody here have one of the MAC/Husky/Stanley microtough or Proto precision ratchets? What do you think of them? I have been eyeing them up for a while at Home Depot for $20 each. -Dan

Merkava_4 must have been on the Minneapolis Craigslist today looking to score some more snapon tools. http://minneapolis.craigslist.org/tls/580342087.html -Dan

I know a lot of people have used them, but how far expired can you go? I was thinking of trying the 299 coupon for the 41" tool box bottom. Dan

I am in need of a 1/4 NPT helicoil type kit. I WILL NOT pay the $200 for the genuine helicoil kit, does anybody know of a generic and where to find it? -Dan

I am looking at getting either a set of tap sockets or one of the gear wrench 5 piece ratcheting tap handle. http://www.gearwrench.com/catalog/specialty_tools/ratcheting_tap_and_die/setdetails.jsp?part=3880 What is your input? -Dan

What size are most ball joint nuts 21mm or 22mm? I am planning on using my $5 sears coupon to get one. -Dan

I don't know if this has been directly discussed here before, but I know problems related to the difference between continuous use CFM and Average CFM have. Such as "my die grinder is rated at 6 CFM and my air compressor is rated at 9 CFM but my air compressor cant keep up". I recently...

I was looking through the OTC book today and seen the canister type injector cleaner. Does anybody here have experience with these? Do they work good? How often should this type of cleaning be done? Thanks, Dan

http://cgi.ebay.com/ebaymotors/1-2-3-8-DRIVE-RATCHET-SOCKETS-EXTENTION-PROTO-S-K-MAC_W0QQitemZ180191577924QQihZ008QQcategoryZ43993QQrdZ1QQssPageNameZWD1VQQcmdZViewItem?_trksid=p1638.m118 I know someone here will take an interest in this. -Dan