Search results

What's good bottle jack for a CX5 with about 7 inch ground clearence and 11 inch jacking point? For carrying in car for flat tires. CX5 is just under 2 ton 4 thousand pounds Enerpac GBJ003A Collapsed Height 6.61" Extended Height 13.31" Norco 76503B Low Lift Height 7.5" High Lift Height...

As my own company I supply my own PPE and am looking at safety helmets. Considering the Kask Zenith X2 or Bulldard Advent A2. My insurance strongly recommends changing to safety helmets from hard hats meaning start using a safety helmet or we'll jack up your rates. Change to safety helmets...

Looking for driveway snow clearing tools. Walkways to front door and 20ft wide x 25 ft long drive in front of garage. Saw Dyiom shovels and JME snow plow and pusher. Curious about the Dyiom shovels thst are new at Big Orange and look solid but are priced above True Temper and Bully tool...

Good vacuum around $400 for garage dust and cleaning, indoor messes from home improvement projects including drywall dust? Looking for a compact 4 to 6 gallon vacuum. Looking at Nilfisk aero 21/ aero 21 innox/ attix 33 vs a Nacecare PPR380 or WV370? Confused about aero vs attix models and innox...

Anyone have a Trinity THA-0303 garage sink? Thoughts? Want narrow garage sink and Trinity is 21"W x 24"D size. Quality looks ok, model with full metal feet but uses low grade 306 stainless. Want utility sink for dumping mop buckets, rinsing dirty rags before wash, cleaning paintbrushes, the...

Tooltopia is a lot cheaper than some other sites. Good retailer? Milton PBT100 and PBT300 are $100 or so less then other sites. Bought Vacula blow gun from without issue a couple years ago.

Put in a new NAPA legend Professional 735 and looking at battery testers and chargers. I do short trips and periodically need to charge the battery. I've also had a few batteries go bad. Looking at CTEK CT5 time to go charger and Midtronics PBT300 tester. Anyone has experience with these...

Looking for Fluke C25, C35, C280, or other soft carrying cases. Let me know if you have cases you got with a meter or kit laying around and not being used. I'll pay shipping plus a little extra for your time and effort. Want soft cases that fit my Fluke 117, T+Pro, Fluke 62, and better case for...

Have an older late 80's or early 90's Fluke 87. Connector on 9-volt battery harness has pulled off. What type of 9-volt harness can I use? I haven't found a Fluke replacement harness or part number. Looks like "I" or "T" type connector are available. It's old but not sure if it's ready for the...

Looking for a good clamp meter to measure current indirectly. Will be used around the house so 400A AC is ok and I know it doesn't measure DC. How is the Fluke 323 vs a T5 600 or 324 or T6 600? I already have a Fluke 117 so I don't need all the features of the T5. 324 doesn't seem to add a lot...

What are your favorite passive high dbr behind the head/ neck ear muffs Looking at the 3m Optime H10B and 3M™ Peltor X5B. For occasional use over earplugs is it worth getting the X5's and are there others you prefer? I use earplugs for most noisy work but like ear muffs over earplugs for...

Favorite new tool is a finishing/ detail hair trimmer from the local barber supply shop. US made t blade clipper from Oster's pro line that cuts right through hair on necklines and around ears. Flip up cutter on my Braun shaver struggles with longer hair. Great trimmer for the neckline and...

Looking for an RMS meter for home and shop use like a Fluke 117 or T6-600 or Klein MM700 and open to other suggestions. Like to stay in the $150 to $200 range and know most in this range are made overseas. And I think 1XX Flukes are rebadged Uni-T models? Replacing a basic Gardner Bender. For...

I went through the GJ forums but only saw older posts about IR temp guns. Is the recommendation still the same? Buy Fluke for the accuracy or just buy something cheap since most have decent accuracy? Looking to spend around $100 for something accurate, that can survive drops from a few feet and...

Anyone had experience with Indow window inserts or other brand window inserts? Found Indow while searching for inserts for single-pane windows. They're acrylic customer fit compression fit window inserts. Indow sends you a measuring kit then they send you custom compression fit acrylic inserts...

A few cities around here have banned gas-powered leaf blowers. Small engines can create a lot of pollution but leaf blowers are handy for larger jobs and blowing out gravel or rock mulch. I'd rather see a limit set for emissions, particulate matter, and decibel limit vs a blanket ban on all gas...

Updating to clarify. Was looking at various hand truck options and came across the AZ Hand Truck. Much beefier than anything I need but impressed by it and curious if anyone has one or has used one. I'm a fan of anything that's overbuilt and will last a lifetime. Very beefy monster hand...

Did GJ get hacked? limjaebeom0748 doesn't show banned yet. Translates to something like Internet Casino Seoul << js777.tk >> >> Internet Casino 인터넷카지노서울《《⇔ js777.tk ⇔》》인터넷카지노 limjaebeom0748 Member Join Date: Dec 2019 Location: Seoul South Korea Posts: 53 EDIT: Reported first than posted here.

Setting up my MAC5200 air compressor hoses and tools. What's the suggested set up for hoses, whip hoses, and couplers? This is what I'm thinking: male plugs on both sides of my (1) 25 ft and (1) 50 ft hoses one male plug to compressor qc other male plug to whip hose female qc on whip hose...

The Makita MAC700 air compressor comes with enough sample oil to fill it the first time. After breaking in for the 20 minutes with the air drain drank valve open I'd like to change the oil out but it's hard to find the SAE 30/ ISO 100 non-detergent air compressor oil locally. Found some mineral...