Search results

  1. L

    USA Made 1/4, 3/8, 1/2 Drive Shallow, Semi, Deep SAE & Metric Socket Sets!

    USA Made 3/8, 1/2 Drive Shallow, Semi, Deep SAE & Metric Socket Sets! I have some very comprehensive sets of USA made sockets for sale! Almost all are either SK with some fillers or one complete set of Proto in 1/2 SAE. All socket sets are used and will show signs of regular use like minor...
  2. L

    SK LP90, Proto Precision 90, Snap On Dual 80

    All these ratchets are used, but still 100% functional and in good to great shape. There is no engraving on any of these ratchets. 1/2 Drive Proto USA Precision 90, 10.8" (J5449HTC). Excellent shape, has not been used. Going to stick with dual 80s for 1/2 drive. $130 shipped 3/8 Drive...
  3. L

    Sk, Proto, Koken Bit Sockets (SAE/Metric Hex, Torx, Torx Security, Torx Plus)

    Sk, Proto, Koken Bit Sockets (SAE/Metric Hex, Torx) Metric 1/2 Drive Hex Bit Socket Set. This is a combination of SK (USA), Proto (USA), and Koken (Japan) bit sockets. These are used, and there is some rust on some of the bits (not the chrome sockets, just the bits). Otherwise in great...
  4. L

    Value Oriented Comparison of Harbor Freight Tool Boxes

    Link to spreadsheet for those who want to look at the data themselves: https://docs.google.com/spreadsheets/d/1fgoUv-S26lc_KQ3MxNfGZE02Zgv2MuQ0DC57nCcRiiQ/edit?usp=sharing I did a comparison of similarly priced units at Harbor Freight. The competitors were: 72" Bottom Box by itself ($1000) 56"...
  5. L

    New Harbor Freight Welders

    HF is releasing some new welders under their own Vulcan "brand." The only one I've seen the specs for are the MigMax 140, which is a 120V MIG with infinite voltage and wire speed adjustment, an angled cast aluminum wire feeder (like miller's nicer MIGs), 10ft leads. Significantly less weight...
  6. L

    Metric Fitting for Welder's Gas Input

    I got a second gas cylinder (and thus a second regulator and gas hose) so I could start welding aluminum. The hose that came with the regulator has 5/8" x 18 male flare fittings on both ends. I have an HTP Pro Pulse 200 Welder and it has a male M14 x 1.5 flare fitting on it. I figured I'd...
  7. L

    Picture Testing

    Dropbox 1. https://www.dropbox.com/s/unbyxj7t5142dq9/IMG_2565.JPG?dl=0 2. Tinypic 1.
  8. L

    Snap On F80 Excellent Shape

    Great Shape, only part that really shows any use is the anvil. Other than that it is near perfect with only a few light marks in a few places. Works great. $65 shipped to your door!
  9. L

    SK 3/8 90T v Snap On F80

    Saw the SK 90T ratchet was for sale at HJE ($66 shipped to me), so I had to grab one to see how I would like it. Taken a long time for this ratchet to get to market, so my expectations were high. To start, the length is 8" and the chrome is great. The handle is comfortable, and will work for...
  10. L

    What is it? Ratchet Head Adapter?

    Recently I bought a GL872 Snap On 3/4 drive ratchet for pretty cheap. It came with an attachment that I can only guess is for attaching a different non Snap On handle to the ratchet head (torque wrench?), but can't find any info on it from Snap On. It has a 15/16" diameter round stock end on...
  11. L

    The Chinese Do It Again...

    Another blatant rip-off of an excellent work light by Astro Pneumatic....Bothers the hell out of me that it is such a blatant copy. Doubt it actually has a higher lumen rating. Made In China complete with crappy ChinEnglish warning to not buy from other sellers in case you get ripped...
  12. L

    Craftsman USA Wrenches and Gearwrench

    14 Piece Craftsman 6 point SAE Set! Sizes 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1. Great shape lightly used, some signs of use/marks on them. Hard to find a USA made Craftsman wrench set now! These are also 6 point box ends too! $75 Shipped
  13. L

    Sk, Armstrong, Craftsman, Urrea, Gearwrench, Channellock, Ideal

    $30 for all of this Two Gearwrench (KD Tools) pliers (3729 and 3888D) for push pin fasteners. These are all over vehicles and hold things on like plastic skid plates, intakes, interior trim, and so much more. These pliers make them easy to remove instead of using a screwdriver to try to pry...
  14. L

    SK 47170 72 Tooth 3/4 Drive Ratchet (plus Pittsburgh Pro Breaker Bar)

    Got an unused 3/4 drive 72 Tooth SK ratchet. I have put a socketed two on the drive end but I've never actually used it before (hence why I am getting rid of it). Unused and excellent shape, this is an IDEAL Sk tool with the "AA" date code (made in 2011). Best price for a new one I could find...
  15. L

    Armstrong Ratchets, Channellock, Ideal, Craftsman....

    Here is a pretty hard to find set of tools...The KD Tools GearPliers set! It features an 180 Tooth gear plier that can ratchet close or be set to open and close without the ratchet mechanism. Its unique locking technology allows multiple different tips to be inserted into the gear plier...
  16. L

    Matco/Armstrong 88T and Snap On Dual 80 Comparison

    I thought I would throw up a few quick shots, measurements, and thoughts about the 88T Matco/Armstrong ratchets vs the 80T Snap On ratchets. I don't have my TL72 and T72 from Snap On anymore (sold them because I hated them), otherwise those would be included in this too! UPDATE: I have added...
  17. L

    HF XT Impact using the same parts supplier as CP?

    Another indication that HF is stepping up their game....
  18. L

    New Armstrong 12-992 88T Ratchet

    A ratchet that needs no introduction here on GJ. Brand new, never used. It is the 88T model, not the older 60T model. USA MADE, Perfect shape, and a high quality tool. Best price on the internet for a new one right here- $75 Shipped
  19. L

    MK Morse Dry Cut Saw

    Recently purchased a MK Morse Dry Cut saw and figured I would put up some photos and my initial impressions. Pictures are a little dark due to crappy lighting in the garage, but should be better than anything else I could find online! It arrived well packaged and in good condition. No...
  20. L

    Sometimes, the imports are better...

    I've had a Gearwrench 80546 swivel spark plug socket with a permanently attached extension for a few years. Makes it so your extension doesn't come out of your spark plug socket when using it, and it has a swivel function making it easier to get into some hard to reach places to do spark plugs...
Top Bottom