Search results

Search the forum Search Articles
  1. G

    tripping breaker when testing switch and circuit

    I installed a switch on a new circuit. After installing and before closing it up, I test the switch and receptacle on the circuit with a multimeter to make sure the metal boxes are grounded properly. I do this by seeing how much voltage registers between a hot screw and the metal box itself...
  2. G

    no neutral at switch

    I wired a circuit with a switch-controlled receptacle physically in the middle of the circuit between the breaker and the switch (why is a different story). See diagram below. Is this non-compliant with latest code since there is no neutral at the switch? Since there is no way to connect a...
  3. G

    Motion sensor switch wiring

    I'm replacing a simple 15 amp light switch with a 15 amp motion sensor for an overhead light. The unit has wires and caps rather than screws I think because the wires connect to circuit boards inside the unit. What threw me is the sensor only has 2 black wires and a green, no neutral. I...
  4. G

    Why can't I trip the breaker?

    I'm adding general lighting, and receptacles for workbenches and a compressor, to an existing 2-car homeowner attached garage (20x20). I had another thread asking how to size the circuit for the compressor rated at 115 volts / 15 amps, and there was some concern I'd be tripping a 15 amp circuit...
  5. G

    Electrical lable and wiring for compressor

    I'm plannning the wiring of my existing basic homeowner attached garage to add workbench receptacles and overhead general lighting. I've been scouring the electrical subforum and learned a lot. The basic questions about circuit loads etc. drove me to one specific question which is the topic of...
  6. G

    Craftsman 26 in. 4-Drawer Heavy-Duty Ball Bearing

    $200 Is this a value? Good price / quality point? [/URL] http://m.craftsman.com/Craftsman-26-in.-4-Drawer-Heavy-Duty-Ball-Bearing-Rolling-Cabinet---Red-Black/p-00903771000P?lid=ccn_banner_25off&rioptype=CC&ruid=2004543&sid=IOx20150211SYRRLPCCNx0712007x2004543xCCNEWSDFLT&eml=256235707
  7. G

    Craftsman 250 pc. Mechanics Tools Set $150

    Craftsman 250 pc. Mechanics Tools Set with 3 Drawer Case $150 on-line only http://www.sears.com/250-pc-mechanics-tools-set-with-3-drawer/p-00938250000P?adcell=hotdealsrow1_tools250pctoolset
  8. G

    Impact ratchet v non-impact air ratchet - worth it?

    Was looking at 3/8 air ratchets and then realized there are also impact air ratchets (as opposed to an impact wrench). Have you found impact ratchet worth the extra?
  9. G

    Coupler or plug on end of rubber air hose

    I'm making my shopping list for iron pipe and connectors; filter/regulator; and connectors and plugs. And I realized I don't know if it is common practice to keep the plug or the coupler on the end of the rubber air hose. I guess it makes sense to keep plugs on multiple tools and one coupler...
  10. G

    Simple Compressor Set-up

    I've researched the various threads on compressors and have a couple simple (for you guys) questions that I couldn't find answers for. First, this is what I have and what I'll do with it: IR GarageMate 2 HP; 20 gallons; 5.2 CFM at 90 psi; tank 135 psi. Ingersoll Rand 2132G 1/2-Inch Edge Series...
  11. G

    Gear Wrench 8-Piece Reversible Ratcheting Combination Wrench Set - SAE or Metric

    Advance Auto $30 http://m.advanceautoparts.com/mt/shop.advanceautoparts.com/p/gear-wrench-8-piece-reversible-ratcheting-combination-wrench-set-sae-9533/25984315-P?searchTerm=gear+wrench
  12. G

    Disposal of old parts

    I have old shocks and struts and springs to dispose of. Dont have a spring compressor. Also a couple of old rotors. Any suggestions?
  13. G

    New from Maryland

    Looking forward to learning a lot. Have a 2002 chevy prizm ("the red rocket") with 210K I'm nursing along until the kids' student loans are paid off. Will need this forum.
Top Bottom