Search results

  1. F

    Anyone here use Mastercam?

    I got a project I'm trying to wrap up at work that has some 78 degree countersinks machined parallel to the face a plate that is bent on a 12 degree angle. I would just lay the part over to compensate for the angle, but the through hole I have to drill in it is drilled in the same plane as the...
  2. F

    Starrett C404R 60" Rule

    I listed this a couple years ago and ended up not selling it. I have it on Ebay currently and thought I would throw it back up here and see if there was any interest. This length rule isn't in production by Starrett, and has been replaced with 48" and 72" models. IT does have owner marks but...
  3. F

    Deal or no deal on this Lista?

    The local buy sell and trade facebook has this lista for $500 obo. No one else has hit on it other than me. I just offered them $250 and I'm awaiting a reply. It looks like a solid box to me from the pictures, but I figured I would go to the experts for some opinions. I'll take a gamble at...
  4. F

    Warn Pullzall Modification

    I'm going to be going on a job next week that will require us to hang some beam clamps, trolleys, and air hoists from some structural beams about 23' up. The access in this room is very limited and the only way up is an extension ladder. In the past we have used a block and tackle system, but...
  5. F

    Diamond Tool and Horsehoe Co. Adjustable Wrenches

    We went to an estate auction this evening and I had high hopes of coming home with some of the real clean tools there but as usual everything went for near or over new prices. I did chicken out on a 3/4" drive craftsman socket set with a blackhawk ratchet and wright breaker bar and a few...
  6. F

    The "H" press (H is for Heavy)

    I'm building a custom press at work for a field service job we have coming up in a couple weeks. We will be removing and replacing 72 large roller bearings, along with some gigantic hydraulic cylinders. We have been using a small 10 ten shop press that was close to it's limits on removing some...
  7. F

    1997 Jeep Wrangler with a few extras

    As much as I hate to do it, I am listing my Jeep for sale. We just moved onto a piece of property that has been abandoned for a while and I can't justify keeping it when i am in need of a tractor and have no place to park it. 1997 Jeep Wrangler SE 2.5l, ~170,000 miles with 4" Rough Country...
  8. F

    Milwaukee Heavy Duty Portable Bandsaw

    I have a used Milwaukee #6225 portable bandsaw for sale. It is in perfect working condition, but does have a few scratches from use. A case is included, but it is not the original case, it is from a model 6238, which really doesn't affect it at all. These retail for $265 on amazon, I am...
  9. F

    Vintage USA 1/4" socket set: Snap on, Williams, Craftsman

    I have a couple similar sets of this nature and need to clear out some tools. This sale includes the Williams Midget Electrical set box No. 1285P, a snap on MV71 ratchet, 10 assorted Craftsman 1/4" drive sockets, Wizard and Wright Extensions, and a Craftsman breaker bar. The logo inside the...
  10. F

    Matco 13 piece 3/8" metric Impact socket set

    Matco 13 piece 3/8" metric Impact socket set, Carbide Burrs For sale/trade today is a Matco 13 piece 3/8" shallow impact socket set, sizes 10mm-22mm with Matco rail included. I'm selling this because I have a mac shallow/deep set on the way and can't make up a reason to keep both. They do...
  11. F

    MAC Impact hex socket set

    I have a 7 piece MAC 1/2" drive impact hex socket set for sale. Sizes range from 5/16" up to 3/4". This is a complete set with tray, and in good condition. The tray has a little paint wear on it, but has a good logo and no dents. SOLD
  12. F

    The Road Warrior: A Cheap Mobile Workstation Build

    I thought GJ would be interested in a little side project I've been working on. I work for a company that provides repair and installation services for the steel industry. Our tools see a lot of time on the road, and plenty of abuse. Our toolboxes go through a lot of abuse as well. After...
  13. F

    Rare vintage MAC hex socket set?

    I spotted this set laying in a toolbox at the flea market today and have been trying to research it online this evening and cannot find any information on it, or even a picture of one like it. I figure if I am going to find someone who has seen a set like this it will be here. It is a...
  14. F

    Carbide Grinding Burrs, Starrett Tap Handles

    Tonight I have a lot of 5 Fullerton carbide grinding burrs NIB. They have a diamond shaped head, 1/2" cutting diameter, 1 1/8" cutting length, 1 3/4" long x 1/4" thick shank, and are a chip breaker style. These are brand new in the package, and from my experience run about $25 a piece. I am...
  15. F

    Starrett, MAC (WTT), Gray Canada

    Ok I have a few more things this evening, first is a Starrett no. s 229 3 piece telescoping gage set. Great condition, looks like they have been very well taken care of. sold Next is a Starrett no. 299 rule clamp. This is sort of rare item and it vintage, but works good as new. SOLD...
  16. F

    60" Starrett Scale and Inside Mics

    Today I have a couple more Starrett items. The first is a discontinued No.C404R scale with 4R graduations. It does have owner marks on both sides, but other than that is in excellent shape. They still make the C404 series, but not in the 60" version. I can take more pictures upon request...
  17. F

    Starrett, Hatchets, Case **, Boy Scouts of America...

    I have a random pile of stuff today. First is a starrett No.299 Rule Clamp, this is sort of a rare item and is in very good condition. Both the screws are smooth and it has no etchings or marks on it. $20.00 shipped Next are two hatchets. One is a Stanley and the other is a Collins...
  18. F

    Starrett Levels

    I have two starrett levels for sale. The first is a vintage cast iron 18" level. The level body is in excellent condition, as well as two of the vials. one of the side vials is dry. These are made to be removed and replaced if you can find a replacement vial though. $35 shipped sold...
  19. F

    Matco MT2858 3/8" Air Ratchet

    I bought this for a job at work and ended up not even using it, it is in like new condition. I'm trying to fund Jeep parts and really don't have an excuse to keep it now. Price drop to $180 shipped, or I would prefer to trade on a 3/8" cordless impact of similar quality. If you have...
  20. F

    Snap on TQFR250E 1/2" Torque Wrench

    This wrench has seen very minimal use. It is in excellent condition and lists for $329 from Snap On. I'll take $175 shipped to your door.
Top Bottom