Search results

I use em at work all the time. I like the reversible type, so when doing 2 bolts, you can go clockwise on the first, left bolt and counter to prevent the wire from popping over the hardware. Looks better mainly lol. I've used it for my motorcycle as well for oil filter, drain plug, calipers and...

example I have to add is when using a 1/2 impact, with a 1/4 hose, a 3/4 gun will only have a slight advantage in torque. Now put that 3/4 impact on either 3/8 or 1/2 hose and It will become violent while a 1/2 won't perform any better because of the pipe fitting on the end of the gun. A 3/8...

On my own vehicles yes, that's all I do is replace the piston seals/boots and fill up with dot4 on every new purchase. It is Soooo much smoother in operation. I love the feel of perfect brakes. You notice it greatly on motorcycles. Gives you great confidence. I've had calipers that you would...

O I meant when I am installing new pads, I remove the guide pins and then grab the back of the caliper and twist it before removing it, and it pushes the pads in quite easily. I may shove a prybar inbetween and twist again to get the piston to fully seat. I usually end up pushing in the pistons...

I can see where something like the CNL-909 crimping pliers need to be machined properly to have a good crimp can be of issue in some of the other pliers that share the same features. The reason why I went with the channel locks as there was a history of poor alignment of the others. I just lube...

Pry while the caliper is still on the car?

The less AH, the hotter the batteries get.