Search results

Alarm.com and. 2gig cellular panel works out well. You can do a wired expansion module and re use all the wired sensors. Then do self monitored or a monitoring service.

What and how many cameras are you running? Blue iris is decent but some of the other big commercial nvr software is also an option for a reasonable price.

Wireless options. Mesh wifi router like ubiquity unifi mesh Point to point wireless plus a access point in the garage. 2x Ubiquity nanostation 5ac plus a basic router setup as an access point Wired: Direct bury or conduit plus cat6a or fiber Router in the house and access point in the garage.

Something is broke in one or the other piece of equipment.

Most of the equipment i used cameras with I/O were axis p1425 mk2 but they offer alot of models with I/O that can be setup to do alot with just the camera no special recording software needed. Also have used american dynamics and lots of over manufacturers offer on board I/O

This can be solved with a fiber / power run. Or run power over coax using a good quality direct bury rg59/rg11 and you can do poe over coax for a single camera out to about 1000’ lots of adapter options on amazon for under $100. This power over coax is the same as power over ethernet just lets...

Cat6 is probably overkill but cost wise it keeps you future proof. Get a good quality shielded cable. If I use an nvr from a kit system i just put it out of the way like a laundry room or closet under the stairs. Most of the systems I’ve done use SD cards in the cameras and a poe network switch...

Not sure how the pictures are going to show up using the upload feature but the two black and white images one of a house/detached garage is lorex 4k at night. This image looks good in the hot spot of the built in IR and has help from a light source on the right side of the image. Image of the...

https://www.aiphone.com/home/products/gt-series-versatile-multi-tenant-video-intercom Used systems from aiphone in a previous life doing security and camera systems.

Realistically you are probably going to need a Infrared illuminator at 90’ depending on how much detail you want. I would agree not to get hooked on 4k cameras. Pixel size decreases on the image sensor gets smaller and impacts low light performance unless you increase the image sensor size...

How good do you need? How far away are you trying to view etc?

What cameras and software? As said above multiple smaller motion windows and sensitivity adjustments. Some cameras also have short lived object settings etc to help filter out bugs.

Check out OpenLPR. You can use the free cloudapi and automatically log plates. The 1000 plate reads is normally plenty for residential. https://www.openalpr.com/

Ive had a axis p1425-LE mkII and axis m2025-le holdup against real temperatures at or below the -22F rating. Remember windchill doesn’t impact cameras. The m2025-le is available for around $325 or the axis companion bullet-LE is around $225 but locks you into axis software.

1TB is a decent starting point. I get 5-7 days per camera on some 64gb SD card based installs ive done with 2mp/1080p cameras @ 12fps and 24/7 recording using axis zip stream

Haven’t run into a camera yet that won’t work just plugged into my laptop and a simple poe injector. Not saying some won’t work but I haven’t needed a crossover cable yet. I’m pretty sure you only need one end with gigE and it will still auto negotiate.

No need for a crossover cable if you have a gigabit Ethernet port as it will auto negotiate.

You can get license plate at 50’ with 4k its all about lenses and shutter speeds. You would want to select a lens that allows you to achieve 100 pixels per foot or more. In the day time you can get away with 80ish pixels per foot but at night you will want more like 120 pixels per foot. Also for...

I did a bunch of research at our okd house. We ended up with a company that used a injection system that required them to drill into the crack and thread an injector into these holes. This system made way more sense to me than the systems and inject from the surface. The product was made by...

Most systems I spec use lens calculations based to distance to the area, what im trying to capture and how many pixels on target are wanted etc. But i do have a single port poe injector to test a location if the install will be a pain etc and have to prove it will work. This comes in handy for...