Search results

Typical compressor output is 3.8 cfm per horsepower. Example: (7.5 hp x 3.8 cfm= 28.5 cfm) We always try to make sure the Piping isn't the limiting factor, so if your compressor puts out 28 CFM, we want to be able to flow more than that in any point of the system.

There should be a "x" in the top right corner of the video. if it isnt, please send me a DM. Thanks!

Hi Bad5x8, that fitting should not swivel on you. Send me an email if you can [email protected]

https://rapidair-production.herokuapp.com/ Hi Guys, Mitch with Rapidair here, we've been busy the last 6 months being our new Rapidair System Designer. Answer some basic questions about the building and compressor and the app recommends which size of piping to use based on the system (Maxline...

Hi Shaune, Make sure the tubing is cut flush and straight, next try another fitting if just one is leaking, could be a bad seal. #3. Make sure it is a Rapidair Kit and not a Grip-Clip garage kit. Let me know if any of those help and how many are leaking along with how old it is. thanks!

Hi STRacerDuke, PEX-AL-Pex is way different than HDPE-AL-HDPE, both have their own ASTM# they meet, PEX meets ASTM F1281 while HDPE meets ASTM F1282. I can tell you Pex is rated for infloor heating lines but will not pass any building/OSHA codes for installation (Liquid PSI and Compressed Air...

Hi Rkrcpa, Unfortunately there is no easy way, usually installing it when its warmer will help, but the nylon tubing in the home garage kit doesn't have anything that will help it, hold its shape.

Hi Carap, You can bend the 1" Fastpipe up to 15 degrees

Hi Rich, A General purpose filter regulator (K93217 for example) mounted at LEAST 3-5 feet away from the compressor will help a lot with the condensation. The black pipe will help condense the moisture, but then you might have an issue with rust and debris. Take a look at our fastpipe system...

Hi There, Our Maxline come coiled up, tubing is HDPE-AL-HDPE, blue in color. You can see the product here, check the fittings too to see if they match. https://www.rapidairproducts.com/page/maxline

Hi dogdog, If you have the Maxline M7500 Master kit, That kit should have a 50 year life span on it, and being in the box protected, I don't believe you will have any issues of leaking. I would just check your o-rings before you install to make sure they are soft still. As far as the change...

https://www.rapidairproducts.com/page/maxline Here is the link for our Maxline page, you can view the Installation photos on the top, where we have some in-wall application photos.

As far as the colors go again guys, Blue is the industry accepted color for Compressed Air, Along with Green normally being a color for Inert gasses. ( we do a lot of Colleges and Weld shop for welding gasses too). As well as vacuum systems. Its more of a safety issue as well so someone at a...

Hi Gearhead1, Our Maxline is NOT UV treated, if installing outside we recommend covering or painting the tubing. Not that being said, we haven't hooked up a system personally and tested the lifespan of the tubing to see how long it will last in the direct sunlight, What I can tell you is that...

motofool33, We carry a 1 year warranty on all of our systems, For our competitors, some offer a 10 year warranty, but you need to have met all of their criteria to be approved, which includes having your system installed by a "air professional" (whatever that means) and someone to come in and...

Hi jeepinerdeep, We offer the maxline and fastpipe in Blue or Green, Either system can be spray painted as well, it does no harm to either system!

Hi Matt, You can get the tubing straight without the straightener, it comes down to two things. Pickyness, and Time. The larger sizes can be "fun" to work with, but if you take your time and roll out the coil, then work it over a table edge or pull it thru some conduit, that really helps...

Hi Clint, for direct burial underground or in the wall installation, I would recommend the Maxline, size depends on the HP size of your compressor and how long the run/run will be. The Maxline has a lot longer life span than the rapidair home garage kit, along with Nickle plated brass...

Bullnerd, a majority of the phone calls i receive start out with "I HAD PVC in my shop and it exploded last night ...." lol, I've seen way to many pictures that I don't want to see! Thanks for the Welcome, Here to Help!

Thanks bamawildcat! When or If you are done installing, post some pictures here and if we end up using them on our facebook page, we will send you a free hat or T-Shirt! Make sure to like our facebook page as we do giveaways periodically!