Search results

That looks like good advise DRIFTPIN. I built in northern California in rural area.

I would start by getting a rough idea on the design and then talk to one of the steel building manufacturers. I used Heritage Buildings and they did have a list of erectors in the area. I was the owner/builder contractor and did alll the plans and permits. I have draftsman draw plans but...

Would love to add to the shop. I have their vinyl flooring. Mike

What size building is it. For my Barndo, engineer would not let me attach anything to my red iron. Had to go 10 inches in from edge of slab for 2x's. I put bolts in slab for walls.

My slab and ground work was 50K, Building 66K with insulation and garage doors, Local company charged 25K to put up. So 141K for building. I installed garage doors. My lumber package was 17K 2x6x9 walls osb all the way around. TJI joist for second floor. We did a the work. Had a plumber...

Started Feb 2020. Dates are on Pics. Took me and GF building for 11 months to get final.

I built that exact home. I put home in middle and 50x60 on one side and 1200sq ft "atrium" (for county purposes) which will be my showroom about 30 x 40. I have 1735 sq ft living on bottom floor and engineered it to put second story if I want (lots of storage for now). I did 20 foot eaves. I...

Stu on Moparts always said to use the Liftmaster

It's 32 sqft 4'x8' and I think it's like t-11 where they match up on ends.

I used osb on outside of 2 x 6 studs per plan.

You could try this https://www.homedepot.com/p/EUCATILE-32-sq-ft-3-16-in-x-48-in-x-96-in-Beadboard-White-True-Bead-Panel-975-759/205669196 and just pin nail it. Not the cheapest but if you buy 15 or more it's cheaper. Wouldn't be strong but pretty.

When I built my Bardominium in a metal building I was told not to attach anything to building.

I understand that system uses the cold water line as the recirculation return. I have never used this type. The pump actually goes on water heater the valve goes under sink. I don't really know if hot comes out of cold as I have a lever valve usually on hot

I went with a 50 gal Rheem hybrid heat pump and a recirculator in my 1735 sq ft with 2 occupants. This https://www.menards.com/main/plumbing/water-heaters/hot-water-circulation-pumps/watts-reg-hot-water-recirculating-pump/0955800/p-1444446169868-c-8646.htm gets hooked up to farthest sink. I...

I used this guy for my Barndo build in Orland. https://ausmus-engineering.business.site/ The company the county used for plan check needed an engineers stamp even though it was pretty much a stick build inside an engineered red metal building. He did take away a sheer wall that would have...

I can remember when I was a kid, mid 70's, my grandfather would pour the used oil along the fence line to kill the grass. That was before they had weedeaters.

If you look at the second link I posted, on the right side of the screen there are three prices he shows. Basic, Standard and Premium Looks like you want the Premium and at $250, I would consider that cheap if you're looking for investors.

I attached some banners with different cars etc. They hang down when the door is open.

You might look at FIVERR. https://www.fiverr.com/categories/graphics-design/architectural-design-services?source=vertical-buckets This guy may be what you're looking for...

On my shop I went 36 because I could use 2x4 trusses. Over that needed 2x6 at 1.5x's the price.