Search results

I just got around to it this past weekend. I had a neighbors son open the side door and a couple of leaves blew in while the surface was soft, you can see the spots that I will spot fix. When scuffing I used a black pad and could not tell that is was getting scuffed, it's tough stuff. I...

incase this question comes up again in the future. I was told a scuff with a red pad after the product has fully cured. The cause is lite application, I will say its difficult to see with the semi gloss from the sealer. In all I think this was a pretty easy application and initial thoughts on...

I applied Ballistix Black and have a couple of areas that look a little light in application or gloss. What needs to be done to apply a second coat, I can spot repair or do I need to scuff and second coat the whole shop ?

Having a place onsite to spread the excess soil would have been huge in my site work. I "needed" approx 200yds removed and dumped and another 200yrd of gravel/rock. I $32K over on my site work and have another $10k to complete (with a different contractor.

I have narrowed my floor surface to SPGX or BallistiX. This is a 6mo old new slab, use will be a home garage shop, some wrenching. Wants are looks good, can repair damage, chemical resistant, not too slick when wet, reasonably easy install (diy), and if all equal cheaper is better. I have...

thanks, I will reach out this week. Thoughts on acid etch, primer, or have burnished?

Yes, I want something that looks good. This is my garage and home office combo and will be the price of a house in some markets when done. The office is attached and engineered HW, I don't want to spend more if I don't have too. I was originally going to have burnished but a guy in my town...

What have you heard? I was leaning that way, my painter will be finished in about a week and after my G-Door arrives I was going used Ballistix. As a sealer, My use will be home old guy close to retirement wrenching on my own cars. My wants, not too slippery, reasonable durabilty for...

Thanks, I like the look but need the durability to park and wrench. I get the over investigation on finishes and processes.

We had an additional $30K in excavation expense and the contractor under estimated labor. Construction is expensive in my area, I hope to be done for $300/sqft at this point. That is with me doing the electrical and now plumbing. But none of that is a basic job. I will have hot and cold...

I will take a look, can the floor be ground or burished first? I haven't moved in yet

Yeah, right now I am looking at $100K over budget. I am pretty sure some of it will be used as they finish sheeting which will be this week.

I am new here and just saw this thread. My GC has covered my entire garage floor with 1/2 sheets of plywood to protect it.

Would you expound on that requirement, and if you don't object, what city? Bainbridge Island WA, Actually GC said it was required and laughed. I wiring the space myself as was going to install anyway. My wife sells real estate and shocking how many times that is a major issue.

We will have a full bath with a shower

Thanks, no "IT" closet just WIFI extender Extra conduit is always a good idea Surge protector in panel not something I had considered, I will look into that Will check max breaker size agree 2 1/2 larger than I need but the trench was open Will be standard bathroom fan All receptacles will be...

Perfect timing on this as I am trying to figure out my finish on my new 25x25 shop/garage expecting to install a single 4post lift for storage and some wrenching. My wife will use her bay for parking. We live in the PNW so our climate is mild, driveway will be crushed granite. I had the pour...

dcg9381 Thanks for the reply, I'll do the 60A for the car charger it will only be about 20ft from the panel and I will blank it off. The HVAC, I can just run a flex from the panel to the location of the outdoor unit and disconnect. I have a bid from a HVAC contractor but think I will DIY...

I am building a 36'x25' garage with a 2 story office, the shop area is 25'x25'. I will be feeding garage from the homes 200a panel with a 2 1/2" pvc sch40 conduit through the yard into a subpanel with 30 spaces. I am thinking 125a on the sub panel and #2 copper feeder. I am going 2 1/2" if...

Looking or some guidance, having a 36x25' shop and 2 story office constructed. Framing will be completed late this week. The shop is 25'x25' with ceiling height from 11' to just under 17'. in review I am concerned with the architects lighting plan. I tried to use the linked visual...