Search results

I have 4 B18-04-FK00B on the shelf. This is 1/2" with plastic bowl and bowl guard. Flows 121 SCFM at 60psi. Let me look and see if I can put a combo together with separate components.

Let me check at work tomorrow. We are a distributor for Wilkerson. If it isn't on my shelf, the lead time is terrible!

Check the flow of the regulator if that is available. Just because you have a bigger inlet (3/8) doesn't mean it will automatically flow more air, especially when dealing with regulators and filters.

I have the Atlas 8000 from Greg Smith, got it with the jack and the accessories listed on the site. It's listed for $2595 with free freight (you will have to add the jack in if you want it) It stores cars most of the time and goes up and down maybe 2 times a month.

wash bay with drain for sure. I hate dirty cars and the winter time in Ohio kills me. Hot/cold water. Heated floor (if needed)

Correct. The cylinders are single acting, meaning that fluid is only on the extend side. When the valve is open to lower the lift, the fluid drains back in to the tank, pulling air back into the head of the cylinder via a vent.

Hydraulic filters are directional (they only flow in one direction.) Since these systems do not recirculate, the fluid is pumped out extending the cylinders and when the pressure is released, the weight of the lift pushes the fluid out of the cylinders and back thru the line to the reservoir...

There are few things it is worth paying someone to do. This is one of them.

This works, I started spraying my mower deck after my experience racing motocross here in the mid-west. I spray the undersides of the fenders before riding and it makes washing bikes a breeze. If it is going to be a mudder, cover the rotors and go to town! Mud builds up to some degree, but...

https://wavianusa.com/ True Jerry cans. they make small ones as well and a free flow spout. Expensive, but well worth the money. I have 2 20l and 1 10l. My son and I race motocross and these have been thrown in and out of a trailer damn near every weekend for years.

https://casterconnection.com

I would wipe down with simple green, dry and then use a pre paint prep specific for cleaning prior to paint. Use something like this: http://us.ppgrefinish.com/PPG-Refinish/Notifications-Result/2017/SX-Cleaners-SX320,-SX330-and-SX440

Awesome table. I have an old fixturing table I bought from a guy in Detroit. 1/2 inch holes drilled and tapped on 2" square. I had the same trouble you did! Getting it out of the truck and onto the stand I made was a challenge for the old hoist! Great table though. Yours looks to be as stout!

I have this lift from Greg Smith Equipment. https://www.gregsmithequipment.com/Atlas-Garage-Pro-8-000 I am in central Ohio if you want to swing by and see it. I use it for the same purpose that you want one for. Storage. It goes up and down maybe 3-4 times a year.... Works perfectly for that!

40 micron is pretty large and are usually sold with cheap filters. Wilkerson stuff, links above, come standard with 5 micron and can get down to .1 micron. Probably no need to run a desiccant at the point of use. You run the risk of the compressed air picking up the desiccant and combining...

desiccant is for water vapor and coalescing filters are for oil vapor. Since you have a refridge dryer, use a particulate filter, than a coalescing filter then plumb into the dryer. Desiccant should have an after filter to prevent desiccant particulate from being sprayed. Good info here...

Tell me about it. I swore to never own black top driveway after doing just this as a kid. Have a concrete driveway now! Best money I ever spent as far as home improvement goes.

These guys do it well. http://www.automotorplex.com/

I have to respectfully disagree with Steve as I have experience with prototype shops doing work for the military and other government agencies. As far as commissioned work on his website? What he is working on is property of his customers, they more than likely do not want their pictures...

The Toyota stuff is the best. Buy it from the dealer. My son races motocross and I use this stuff on all of the 2 stroke bottom end rebuilds without fail. Comes apart easy, cleans up easy and works awesome.