Found a deal on craigslist? - List Here!

454ragtop · Jun 13, 2018

14" wood metal band saw in CT $100. https://hartford.craigslist.org/tls/d/dayton-band-saw-14-inch/6613633980.html Don't be fooled by the "Wood Only" someone wrote on the label, I have that saw, it is wood or metal.

454ragtop · Jun 13, 2018

20 ton press northern Mass $150 https://boston.craigslist.org/nos/tls/d/20-ton-hydraulic-press/6615545332.html

ineedtools · Jun 13, 2018

a52-830 said:
if anyone is looking at those and thinking about putting tools in them, be careful. neither the drawers individually, or the frame/case, were designed for those kinds of loads.

while they may work short term, things will sag and bind up . . . . .

Yep they were map or blue print storage, not super flimsy but they're not going to hold a drawer of sockets!

ineedtools · Jun 13, 2018

a52-830 said:
https://www.facebook.com/marketplace/item/181610539171248

$45
Kennedy 6 drawer toolbox

WESTFORD, MA

Absolute steal!

JimNC · Jun 14, 2018

Not quite sure who would want this, but seems to be a bargain.

Sip jig borer, save it from going to scrap!
https://charlotte.craigslist.org/tls/d/sip-jig-borer-save-it-from/6617179633.html

Ole Slewfoot · Jun 15, 2018

Might just win the hipster industrial coffee table thread too.

cheechi · Jun 15, 2018

Not sure if it's a deal but it looks nice and clean and I hope it finds a good home. I have no connection whatsoever just found it randomly.

https://greensboro.craigslist.org/tls/6618208433.html

dkroth · Jun 16, 2018

Not a huge deal at $200, but it's ball bearing, super clean and comes with liners.

https://rochester.craigslist.org/tls/d/craftsman-tool-chest-rolling/6618480262.html

.

flyingblind · Jun 16, 2018

GAME HOIST - $110 (Not My Add

https://portland.craigslist.org/clk/spo/d/game-hoist/6597568308.html

a52-830 · Jun 16, 2018

flyingblind said:
GAME HOIST - $110 (Not My Add
https://portland.craigslist.org/clk/spo/d/game-hoist/6597568308.html

check out the bottom of the image in that post . . . . .

Shiftless · Jun 16, 2018

a52-830 said:
check out the bottom of the image in that post . . . . .

I wish I hadn’t looked at that. :wtf:

wingnutthehutt · Jun 16, 2018

Dibs on that Speedaire compressor. It looks like the regulator knob is busted off, but I sent an email.

And DAMMIT! Those game hoist photos are even worse than the silver coffee pot photos!

a52-830 · Jun 16, 2018

Shiftless said:
I wish I hadn’t looked at that.

but you still would have looked if i said "dont look at the bottom of those images", right? in fact, i bet more people would have looked. . . . .

a52-830 · Jun 16, 2018

kr 557/537/5N7 stack. includes the hard to find middle box . . . 500$ . . . . looks like pretty good condition . . . . . .

https://www.facebook.com/marketplace/item/488819568204777

JimNC · Jun 16, 2018

$900 for a 3 box stack may not be a great bargain, but check out the boxes, never seen anything like them but look like late 60’s design and in good shape. If they were local I’d probably buy.

SNAP-ON TOOL CHEST
https://austin.craigslist.org/tls/d/snap-on-tool-chest/6618070213.html

larryq · Jun 17, 2018

Vintage Remline top and Lumidor roller box for $50 near Sacramento CA:

https://sacramento.craigslist.org/tls/d/tool-box/6618940615.html

larryq · Jun 17, 2018

Snapon vintage top and bottom set for $300 in Sonoma CA:

https://sfbay.craigslist.org/nby/tls/d/snap-on-tool-box/6618700266.html

larryq · Jun 17, 2018

4" Morgan vise (50 lbs?) for $70 near Merced CA:

https://merced.craigslist.org/tls/d/vintage-morgan-4-vise/6618927335.html

a52-830 · Jun 17, 2018

JimNC said:
$900 for a 3 box stack may not be a great bargain, but check out the boxes, never seen anything like them but look like late 60’s design and in good shape. If they were local I’d probably buy.

SNAP-ON TOOL CHEST
https://austin.craigslist.org/tls/d/snap-on-tool-chest/6618070213.html

it was a snap-on set. seems to me it was early 70's, but it might have been late 60's.

JimNC · Jun 17, 2018

a52-830 said:
it was a snap-on set. seems to me it was early 70's, but it might have been late 60's.

Either way, it’s groovy baby!

shoeless · Jun 17, 2018

Leblond lathe in Willis, TX
No idea if this is a good deal or not, but thought someone here might be interested.
https://houston.craigslist.org/tls/d/lathe/6608672837.html

larryq · Jun 18, 2018

3" Morgan vise (opens to 4 1/2") for $40 in Hayward CA:

https://sfbay.craigslist.org/eby/tls/d/morgan-chicago-no30-vise-heavy/6611898155.html

larryq · Jun 18, 2018

Vintage 1/3 HP craftsman grinder (so old school it appears to have cast-iron wheel guards) for $35 in Modesto CA:

https://modesto.craigslist.org/tls/d/vintage-craftsman-bench/6619650176.html

a52-830 · Jun 18, 2018

so, how come everything in fornicalia isn't free anymore?

bubinga · Jun 18, 2018

ineedtools said:
Yep they were map or blue print storage, not super flimsy but they're not going to hold a drawer of sockets!

Be nice for Machinist tools though.

Sent from my MotoG3 using Tapatalk

wingnutthehutt · Jun 20, 2018

Thanks, Larryq for posting my new compressor! This is machine is a Speedaire 1NNF7 and it should last me a long time. It looks like someone maybe dropped it - it was missing the regulator, as I suspected, and one axle bracket is a bit tweaked - but it functions great. And it saved me 69% off retail. Bonus: born on Halloween of 2017!

https://scontent-sjc3-1.**.fbcdn.net/v/t1.0-9/35533778_10156200998996005_4918745492550057984_n.jpg?_nc_cat=0&oh=070f46e9e0d21b79774904e27e6439bf&oe=5BA5D067

bubinga · Jun 20, 2018

wingnutthehutt said:
Thanks, Larryq for posting my new compressor! This is machine is a Speedaire 1NNF7 and it should last me a long time. It looks like someone maybe dropped it - it was missing the regulator, as I suspected, and one axle bracket is a bit tweaked - but it functions great. And it saved me 69% off retail. Bonus: born on Halloween of 2017!

https://scontent-sjc3-1.**.fbcdn.net/v/t1.0-9/35533778_10156200998996005_4918745492550057984_n.jpg?_nc_cat=0&oh=070f46e9e0d21b79774904e27e6439bf&oe=5BA5D067

Nice

Sent from my MotoG3 using Tapatalk

Shiftless · Jun 20, 2018

That’s exactly how this thread is supposed to work. Excellent!

red · Jun 21, 2018

Any machinists?
Granite Block and Surface Plates

It's FREE

https://hudsonvalley.craigslist.org/zip/d/granite-block-and-surface/6622345767.html

Hugemoose · Jun 21, 2018

Bench Grinder - $30 (Berwyn, PA)

https://philadelphia.craigslist.org/tls/d/bench-grinder/6612754422.html

Seems like a half decent deal for somebody. 1/3 hp Crafstman w/bit sharpening jig and extra wheel.

CafeTools · Jun 24, 2018

Not bad, I just bought a 3/4 hp Harbor fright grinder with a set of polishing wheels for about $75, not sure how the quality compares.

CafeTools · Jun 24, 2018

larryq said:
Vintage 1/3 HP craftsman grinder (so old school it appears to have cast-iron wheel guards) for $35 in Modesto CA:

https://modesto.craigslist.org/tls/d/vintage-craftsman-bench/6619650176.html

I like it, perfect for smaller parts. How much life is left in it though?

SRX · Jun 24, 2018

Free Workbench

Chelmsford, MA

978-729-1769

https://boston.craigslist.org/nwb/zip/d/free-workbench-power/6625776694.html

CafeTools · Jun 24, 2018

That looks great for free especially! I like the power outlets.

Shiftless · Jun 24, 2018

CafeTools said:
That looks great for free especially! I like the power outlets.

Yes, very well done with the holes in the bench, grommets and everything! Clean look.
I have power outlets on my bench too! Surface mounted EMT with 4x4 boxes every 3 feet. :bounce:

thertel · Jun 25, 2018

https://austin.craigslist.org/zip/d/2-file-cabinets/6625982618.html Free

mcmlvif100 · Jun 25, 2018

Don't know if it's a deal but if it was closer, I'd be pretty tempted.

Large Tool Box - Excellent Condition! - $250 (Riverview)

https://detroit.craigslist.org/wyn/tls/d/large-tool-box-excellent/6626222391.html

Large 5 Drawer tool box. This is a very deep unit and the drawers fully extend the length of the drawer when pulled out. Has forklift slots on the bottom, if needed. Approximate size is 34" High, 22.5" Wide and 28" Deep. Very clean and in excellent condition! $250

Shiftless · Jun 25, 2018

That looks like a Lista or a Stanley/Vidmar.
Grab it now! Those are super smooth and super heavy duty. Many guys say they are superior to Snap On.

macgee · Jun 26, 2018

mcmlvif100 said:
Don't know if it's a deal but if it was closer, I'd be pretty tempted.

Large Tool Box - Excellent Condition! - $250 (Riverview)

https://detroit.craigslist.org/wyn/tls/d/large-tool-box-excellent/6626222391.html

Large 5 Drawer tool box. This is a very deep unit and the drawers fully extend the length of the drawer when pulled out. Has forklift slots on the bottom, if needed. Approximate size is 34" High, 22.5" Wide and 28" Deep. Very clean and in excellent condition! $250

Not bad however if you look carefully at the drawer sliders, its not the same quality as a Lista or Vidmar, looks like some kind of knock-off posing as a HD box. This one has the typical style sliders types you see on regular cheaper tool boxes (Craftsman & Harbor Freight) and not nearly as robust as a Lista or Vidmar slides. The rest of the box looks solid and typical of a Vidmar. Not sure what the value of this one would be with those weak sliders. Could still be a good box, just not not a Vidmar

The paint job looks custom (pain in the *** to do).

PS> Shiftless is right: "Lista and Stanley/Vidmar are super smooth and super heavy duty. Many guys say they are superior to Snap On".

Shiftless · Jun 26, 2018

Thanks for clearing that up. I know you know your Listas and Stanley/Vidmars!

Found a deal on craigslist? - List Here!

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member