Craftsman Professional 4 -Ton Jack Stands, One Pair - $24.99

EdJack · May 31, 2014

Craftsman Professional 4 -Ton Jack Stands, One Pair. $24.99. Free Ship with SYWMax, or Free Store Pickup. I bought these last time they were on sale. Very nice for 25 bucks. Heavy gauge steel, nice welds, flat feet (keeps they from digging into the asphalt).

I attached some real life pictures, because the pictures on the website look to be "enhanced" or photo-shopped.

http://www.sears.com/craftsman-prof...D=1225267&AID=11042411&sid=IAx20050830x000545

W0rLDWaR4 · May 31, 2014

What's the COO? They're a great deal! I already have 6 tons and 2 tons but since I don't have 4 tons..I might bite!

soloz2 · May 31, 2014

I have a pair of these and they are pretty nice. Much better than my pair from HF IMHO

Sent from my SAMSUNG-SGH-I747 using Tapatalk

3 at 8 · May 31, 2014

W0rLDWaR4 said:
What's the COO? They're a great deal! I already have 6 tons and 2 tons but since I don't have 4 tons..I might bite!

China

rice rocket · May 31, 2014

Damn them and their hot buy designations.

si_jeff · May 31, 2014

China. But these are definitely better than my HF 3ton. I got these last month as well it was on sale for 29.99 but with $10 sywr points, a good deal.

DSM21 · May 31, 2014

si_jeff said:
China. But these are definitely better than my HF 3ton. I got these last month as well it was on sale for 29.99 but with $10 sywr points, a good deal.

Pretty much what I did. These Jacks are very well made, I was a little nervous about them bc of the Craftsman 3 ton jacks, but the 4 ton jacks are on another level, I will be buying a second pair.

Buckgnarly · May 31, 2014

Damn, my old ones do not have the plate on the bottom.....and for 25 bucks, it's easier to buy them than weld some on!

thachman · May 31, 2014

Is the max height on these really only 17"?? Seems very low.

71goldss · May 31, 2014

Thanks OP!

I liked the idea of the foot plates on these so decided to order a set for pick up today. Just got back from picking them up and decided to take some side by side photos with my Sears 3 ton and HF 3 ton stands. Other than the foot plates, I really don't see much difference between any of them. Though I didn't actually measure the wall thickness, all three look and feel to be the same. Unless I'm missing something, I'm not quite understanding where they get the 4 ton rating on these over the 3 ton? Still, I like the foot plates, so all is well!

Super Mech · May 31, 2014

Happened to be spending the weekend in Albany read this and ran to the Sears Down the road from my hotel. One left on the shelf marked 34.99. I showed the salesperson this post and they matched it! Not a bad deal at all.

Strouty · May 31, 2014

Seems like a great deal, alas I have bought too many deals this week thanks to GJ.

rice rocket · May 31, 2014

71goldss said:
I'm not quite understanding where they get the 4 ton rating on these over the 3 ton?

Maybe better welding/post weld heat treatment? That matters almost as much as the design, if not more.

DSM21 · May 31, 2014

71goldss said:
Thanks OP!

I liked the idea of the foot plates on these so decided to order a set for pick up today. Just got back from picking them up and decided to take some side by side photos with my Sears 3 ton and HF 3 ton stands. Other than the foot plates, I really don't see much difference between any of them. Though I didn't actually measure the wall thickness, all three look and feel to be the same. Unless I'm missing something, I'm not quite understanding where they get the 4 ton rating on these over the 3 ton? Still, I like the foot plates, so all is well!

The foot plates was definitely a big selling point for me, but also what I notice is the weight of the jack stands. They feel heavier than my uncle's old 3ton stands.

rice rocket said:
Maybe better welding/post weld heat treatment? That matters almost as much as the design, if not more.

Don't note jack **** about welding, but definitely agree with you on heat treatment.
Also another thing I like is the counter pawl on these, I am always paranoid about dropping the jack stands on myself, but these are immensely better than the 3 ton jack stand's counter pawl

jmscollinsiii · May 31, 2014

Bought a set. Thanks op!

91FE · Jun 1, 2014

Thanks OP. Was about to pull the trigger on two pair of the HF ones. Nabbed these for in-store pickup instead.

3 at 8 · Jun 1, 2014

In for 2 sets. thanks; OP.

The Ratchet Man · Jun 1, 2014

Thanks OP! Ended up being $21.34 after surprise points I didn't know I had.

thachman · Jun 1, 2014

Can someone tell me the max height on these? Same as HF 3-ton?

kiatech · Jun 1, 2014

I got a pair of these back in ohio, good buy for the money.

zeekh · Jun 1, 2014

thachman said:
Can someone tell me the max height on these? Same as HF 3-ton?

I think it said 17" on the website

71goldss · Jun 1, 2014

thachman said:
Can someone tell me the max height on these? Same as HF 3-ton?

Just measured mine. Fully extended the Cman are 18" to highest point. My HF 3 ton are 16.75" to highest point.

WilltheEngineer · Jun 1, 2014

I was going to go with HF's 6 ton, with a ~24" height for a second set. For no reason than one day I might need 24", though I can't think of any reason right now...

Might have to go with these, for no other reason than my pts are about to expire...

thachman · Jun 1, 2014

71goldss said:
Just measured mine. Fully extended the Cman are 18" to highest point. My HF 3 ton are 16.75" to highest point.

Thanks! That's a big help...need a taller set for my truck.

Requin6 · Jun 1, 2014

I bit on 2 pair of these. Store pick up is 13-15 days out. Going to be a nice upgrade from my 2.5 ton CMans. These appear to be much more sturdy.

Cruzomatic · Jun 1, 2014

These things come in handy. I used mine today actually during a tire rotation.

DSM21 · Jun 1, 2014

Requin6 said:
I bit on 2 pair of these. Store pick up is 13-15 days out. Going to be a nice upgrade from my 2.5 ton CMans. These appear to be much more sturdy.

They are trust me!

Pumpman1968 · Jun 2, 2014

In for a pair......total $13.61 shipped with points that my redhead had! Happy Birthday to me!

EdJack · Jun 30, 2015

These are back on sale again, for $27.49 this time around.

COO - China.

Great Deal for $27.49, especially if you have points to lower the price even further.

Here's the link again, for those interested:
http://www.sears.com/craftsman-professional-4-ton-jack-stands-one/p-00950163000P?sid=IAx20050830x000545&aff=Y&PID=4485850&AID=11034749

EdJack · Oct 8, 2015

Back again people - For $29.99 this time around.

Not listed as a Hot Buy.

So you may be able to get some coupon codes working with it. I haven't tried yet.

Great jack stands. Probably the best non-USA jack stands out there right now for this price point.

Chadddada · Oct 8, 2015

9700055523739964 5 bucks off 50, expires 10/10.

Got 2 pairs for 54.99

PRND3L · Oct 8, 2015

Thanks EdJack! Surprise points got me a pair for ten bucks and change. :thumbup:

Tsquare · Oct 8, 2015

Just picked up 4 ( 2 pair )for $54.95 out the door, they gave me $10 in surprise points, thanks for sale note.

encantofred · Oct 8, 2015

using points i got 2 pair for 36 bucks shipped to my house.

thanks

tom

k-os · Oct 8, 2015

I got 3 pair (one pair for a friend) for $63 after surprise points.

Sent from my iPhone using Tapatalk

PoorOwner · Oct 9, 2015

I got a $10 off so 4 for $50 + tax. I wanted it for the flat feet feature
But isn't 17.75" max kind of low. I mean my truck frame is already 12" off the ground. I am not sure if they will reach. Given they seem to be 4 ton heavy duty stands but have a 2 ton height??

wahoowad · Nov 6, 2015

How can I keep track of when these go on sale? I want a set but can wait a couple weeks rather than buying a cheaper pair of lower tonnage.

Car_Guy · Nov 6, 2015

wahoowad said:
How can I keep track of when these go on sale? I want a set but can wait a couple weeks rather than buying a cheaper pair of lower tonnage.

you keep searching the sears site every few days (or maybe once during the week and once on the weekend) and see when they are on sale...

Myth · Nov 7, 2015

I have a pare that I bought two or three years ago, they are strong and heavy, I really like them! I got another set last week. It's the same part number as my old one and have the same spec, nut the new one is much lighter and the arm is about 50% narrower than my old one! I think it's ok for its price, but I wish I could get the old model!

Xray · Nov 7, 2015

With the sale and surprise points I was able to pick up a pair for just shy of $15

Mine have an issue with one leg shorter than the other. My Sears are out of stock until Dec. I think I'll just mig a spacer on the foot to level them out. It will be quicker than driving back to return.

Check them out at the store before you get them home...

Quick YT vid of the wobble with mine

Craftsman Professional 4 -Ton Jack Stands, One Pair - $24.99

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member