Snap On - Lot of 1/2-drive sockets and accessories

Snap On - Various sets of sockets and accessories

A little while back I did a big ratchet sell-off to raise money for my custom knife business. Well, here's a bunch of sockets that have to go, too!

Paypal fees are included (no gift payment, please!), but shipping is not. We all pretty much know what flat rate boxes can fit, and how much they cost. Any more complicated shipping arrangements can be quoted on a case-by-case basis. The long breaker bars mean we'd have to use a gameboard-style large flat rate, but it's possible I could actually fit everything in just one of those. As long as I seal it up strong, there should be no problems! ( Except for the poor guy who has to deliver a 99-pound box! ) If it fits, it ships, lol.

I would like to sell all this 1/2-inch stuff as a lot for $700, so let's try that first. Truck prices are around $2600 I think. The sub-lots add up to about $1100 at secondary market prices, so I'm going to try that 35% off package price of $700 first, because I need this to not drag on!
Nevermind that, I guess I'll go with prices for each sub-lot!

Break-down is below the pic. The extensions in the upper-right are blacked out, because I changed my mind about which ones I was going to keep and which to sell, and I didn't want to do the group shot all over again! So, I show the extensions that I'm selling in a separate pic.

Pic album here: http://s1176.photobucket.com/user/s...ap On/Sockets and Accessories/Half_Inch_Drive



Here's what I have in the half-inch drive lot:

A: impact swivels: 1/2", 9/16"(x2), 5/8", 11/16", 3/4".
Model numbers: IPL16B, IPL18A(old logo),SIP18,SIP20,IMB220B,IMB240B. $90
http://s1176.photobucket.com/user/s..._Drive/Half_ImpactSwivel_zps2ebf21ec.jpg.html

B: impact metric: 21mm shallow, then all deep: 30, 32, 34, and 36mm.
Models: IMM21, SIMM300, SIMM320, SIMM340, SIMM360. $95
http://s1176.photobucket.com/user/s...Half_ImpactMetricDeep6pt_zps4cf15b49.jpg.html

C: Impact 6-point SAE, deep and shallow. The 9 deeps are SIM120 thru 260 plus 320 - that is, 3/8" thru 13/16" plus 1". The 9 shallows are IM180 thru 360 (missing 260) plus 420 - that is, 3/8" thru 1-1/8" plus 1-5/16", but missing the 13/16". $160
http://s1176.photobucket.com/user/s...nch_Drive/Half_ImpactSAE_zpsb3ec1721.jpg.html

D: Chrome 12-pt shallow metric. 15 sockets. SWM181, 191(old logo), 201, then SWM221 thru SWM321. Plus an on 17mm 6-pt on the bottom end. Basically 17mm thru 32mm, just no 21mm. The cool thing is, only the 22mm really shows signs of use! Most are unused! $200
http://s1176.photobucket.com/user/s...Half_Metric12ptShallow_1_zpse97b12ec.jpg.html
http://s1176.photobucket.com/user/s...Half_Metric12ptShallow_2_zps3f3226f0.jpg.html

E. Chrome SAE. 6-pt deep and 12-pt shallow. 9 deeps: TS141 thru 201, 241, 281, 301, 381, 401, which is 7/16", 1/2", 9/16", 5/8", 3/4", 7/8, 15/16, 1-3/16, 1-1/4.
12 shallow: SW141 thru SW361, that is, 7/16" thru 1-1/8". On just the shallows, they had had little owner markings on them, which I sanded and polished out to get rid of the markings, and you can tell. $265
http://s1176.photobucket.com/user/s...lf_Inch_Drive/Half_SAE_1_zps73dad9bc.jpg.html
http://s1176.photobucket.com/user/s...lf_Inch_Drive/Half_SAE_2_zpsf2490258.jpg.html

F: Driver sockets.
3 Triple-square 8mm, 10mm, 12mm. Models FTSM8B, STSM10B, STSM12A. The 8mm is 3/8 drive, others are 1/2. Also a Mac 8mm included.
2 Flat - 1/2" and 5/8" blades. Models SW32E and SW40E. Brand new.
3 metric hex: 10, 12, 14mm. Models SAM10A, SAM12A, SAM14A. Old logo. the 14mm was ground around the drive end to reduce its diameter, apparently for clearance.
4 SAE hex: 5/16", 3/8, 1/2, 9/16. Models SA10E, SA12E, SA16E(brand new), SA18A(old logo).
$130
http://s1176.photobucket.com/user/s..._Inch_Drive/Half_Drivers_zpsded36eb1.jpg.html

G: Mix of sockets:
SM27 - 27mm deep
S6104 - 27mm for injectors on German diesels?
S-301 - old 15/16" deep
TW361 - 1-1/8" 6pt shallow
TW-300 1/2 - an OLD 15/16"
...plus a Bonney 1" deep socket!
$40
http://s1176.photobucket.com/user/s.../Half_Spares_and_Singles_zps9515c173.jpg.html

H: S-4 speeder (old logo) - $30
I: S-10 T-handle slider - $10
J: SN15B breaker : Near Mint+ $50
K: SN18A breaker (old logo) : Excellent+ $40
L: SN24C breaker : Mint $60 SOLD


SCO40 down in the lower left of the main pic is a freebee, somebody modded it wider to almost 1 1/2", not worth much like that, but maybe somebody can use it. Just ask for it to be included in with something.

Extensions shown below: SXK11 shiny new, SX10 old logo, and a Universal adapter really old but in great shape. $30




Thanks for looking at my sale thread! Please contact me if there are any questions or whatever. You can message, email or call or text me at 401-eight-oh-eight-5471. Thanks!

Bumping this with sub-lots all priced out. thanks!

This is a bump

Time for a bump.

'nother bump