RATCHETS..snap-on, matco and other tools cheap all day

back2class · Apr 14, 2012

alll sold or deleted

ckadams00 · Apr 14, 2012

PM Sent - I'll take the CMan box set, the used 1/4" pear head and one of the Armstrong 3/8 Pearhead for $16.

back2class · Apr 14, 2012

BRAND NEW snap-on impac gun in box 1/2 drive $260...ALMOST $400 from the crooks ast snap-on..Buy it you cheap bastards!

Snap-on 3/8 socket sets. 3 sets in all. Missing 3 but added 5 so you can sell the extras here or on ebay and get the ones you need. Pretty well used but $500 worth of sockets here guys for $175
8-19mm (14mm is cracked missing 10 and 15)
1/4-13/16
deep 1/2-7/8 (9/16 missing)

Snap-on 3/8 impact socket set metric. Obviously missing a few..LOL $30 (pending to calair)

Snap-on short 3/8 impact extenson $6 (sold)

Snap-on 1/4 drive ratchet with 3/8 drive guts. never seen one like it...has an owner mark...pretty cool item $39

Pasloade finish nailer. $30

Ranodm Blue Point lot. Nice new carb extension in there. $20

SK Sae wrench set 1/2-15/16 plus 1/4. Ugly for the most part $20 (sold)

Sk screwdriver set. pair of stubbies and pair of extra longs..plus extra beat up one.... $12 (pending Bruin53)

More being listed over the next few hours...little stuff too.

Jarhead0408 · Apr 14, 2012

PM Sent-

2nd's on the Craftsman box set.

Also like,

Craftsman long handle fully polished 3/8 $20
The other Armstrong 3/8 pear head $16
Bonney a-701 1/2..never seen one like it. $18
Proto 3/8 5349 $10

back2class · Apr 14, 2012

Oh..wait. What's this? yeah,,,,more quality tools :beer:

Cornwell univeral impact set. 6pt 10-19mm. Nice shape. 14mm is missing but I replaced it with universal adapter and with a 14mm socket on the end is is exactly the same lenght. Use it like this or for a few bucks on ebay buy the 14 and have a nice cornwell universal fitting to boot. $350 from Cornwell.....$125 from me.

pair of snap-on tripple squares..i think...ftx55, ftsm8le $18

8 snap-on hex sockets $23 (sold)

3 snap-on torx sockets $10 (pending PUREVL)

Some black snap-on hard handle screwdrivers..little rough. 6 in all $35

Snap-on Black hard handle stubby ratcheeting screwdriver $35. I need to clean the ratcheting or I can leave it like it is and you warranty it for a new one free.

Ridgid brand pipe cutter. These are not cheap.....$6 for you fellas.

ckadams00 · Apr 14, 2012

Stop it I spent the money I had on your first post! :eyecrazy:

Jarhead0408 · Apr 14, 2012

Dang it, every time I try to go back out to the shop you update, it's like a gateway drug, a little at a time until you are slobbering at the mouth and yelling at the family to leave you alone, you don't need any d*mn help, you can quite any time you want to.

back2class · Apr 14, 2012

Ok guys...i'll get to replying when I get done posting so bear with me...i will sell in order of who said they definately wanted something first so no worries.

purevl · Apr 14, 2012

Dibs on the torx sockets, i'll wait to pm until I see your other posts/ get to $25.

burnin53 · Apr 14, 2012

I'll take the proto 1/2 drive ratchet and ratcheting adaptor and 3/8 ratchet if still available.

back2class · Apr 14, 2012

here is more...

Stupid craftsman wrench sets with the ratchet style open ends. Small metric an sae set. NEW. $20 for both. (pending to Indy)

Small proto lot. screwdrivers and 1/2x3/8 adapter and neat old wood screwdriver $19 (Pending bruin53)

Cornwell lot, few wrenches, sockets, extension and what not $20

SNap-On 48oz dead blow hammer. My dealer keeps blowing me off..obviously needs warranty $40 shipped but it's like getting a brand new one so tool polishers take notice. (pending to PURPLRZR2)

Bunch of Craftsman 1/2dr ratchets. get a new one, round head fine tooth and, older quality one and welll...just a good deal $35 for all the ones in that pic. all or nothing guys.....bring the new one back for $28 of store credit if ya want...lol. (pending JARHEAD)

Mixed brand all USA made universal sae 3/8 socket set $9 (pending PUREVL)

Pile of rusty SK wrenches and such...$7 (sold)

purevl · Apr 14, 2012

I'll add the universals and proto lot tentatively to my list, pending photos.

Edit: just the universals for now, proto lot back up for grabs.

back2class · Apr 14, 2012

sorry...forgot to uplod the pics for the above post

Jarhead0408 · Apr 14, 2012

Annnnnd put me down for the $35 1/2 C-man ratchet lot.....

back2class · Apr 14, 2012

Mac tools metric tap and die set...basicaly brand new.. $99

MAC e4-e5-e6-e7-e8 torx sockets deep $38 ($105 from mac!)

Snap-on 1/4 drive brand new extension set. Over $100 from snappy guy....$68 shipped from me. I can't believe nobody bought this when I listed it a while back..maybe the lowe price will help...lol (pending to PURPLEZR2)

burnin53 · Apr 14, 2012

I'll take the small proto lot and s-k screwdrivers,also.

IndyEngineer · Apr 14, 2012

Pm sent for the craftsman open ratcheting wrench sets

back2class · Apr 14, 2012

Mac 20mm combo wrench in nice shape..just dirty in pic $14.

cw series 13/16 $8

metric combos 17,16,15,13,11 $28 (SOLD)

7/16 and 3/8 $8 for both. (SOLD)

Random stuf.....
klein wire strippers $2 each...two in pic.
automatic wire stripper $6
NAPA line wrench 9/16x1/2 $2
armstrong 7/16 combo $2
no name long ahndle flex ratchet..ive seen worse quality $4
PM...walmart brand 1/4 ratchet. same guts as Craftsman I believe $2
proto professional 7/16 combo $5
Duralast 3/4 combo... $3
Old school Kobalt 15mm combo $7
Nice old NB Husky 1/2 drive ratchet. this is a high quality ratchet! $15
wright 1-1/4 socket $3
Pair 1/2 drive 4" extansions USA $3
Craftsman mini wrench 10pc...well 9pc as one is missing $12
Eklind hex key set..missing the .05 one...anyone ever use that needle anyhow? $6
Viking tire buffer...no idea if it works... $2

Gearwrench metric set missing one wrench (14 I think) owner marked but good working set. 9-19mm and the 11 neesd some tlc. $38

Next pic is a SK 3/4" extension (the kind without detent ball) $5 (sold)
mac 10" impact extension $7
pair Matco screwdrivers $6 for the pair
Mac 32mm impact socket $9 (sold)
pair of matco sockets in rough shape (impact and swivel impact) $4
Matco 5/8 deep spark plug scket. $50 on matco's site. $18 to you. (sold)

Next pic is some random snap-on sockets...dont ask me the sizes. if i wanted to go through that I would have listed individualy. $29 (pending calair)

Snap-on compression tester...I think. Goes to 800psi. Diesel I guess. What you see is what you get. $35 (SOLD)

Ok, lets sell these MAC impact sockets...who wants this complete 1/2 drive set in SAE $95..that is dirt cheap....i think anyhow.

Ebay....we don't need no stinkin ebay with you guys

calair · Apr 14, 2012

Pm sent for Snap On 3/8 impact socket set.

IndyEngineer · Apr 14, 2012

Also take the Armstrong f-a-51 3/8 $8

IndyEngineer · Apr 14, 2012

Cancel the Armstrong f-a-513/8 $8

I'll take Craftsman long handle fully polished 3/8 $20 instead.

back2class · Apr 14, 2012

IndyEngineer said:
Cancel the Armstrong f-a-513/8 $8

I'll take Craftsman long handle fully polished 3/8 $20 instead.

I think that may be spoken for...havn't really checked yet but recall seeing that in the postings.

back2class · Apr 14, 2012

Sk Socket extension lot (7pcs) $15 (pending PUREVL)

Craftsman Socket set 1/4" drive in SK socket box $10 (pending PUREVL)

Lot of Craftsman tools...random stuff like sockets, wrenches, #3 phillips pro screwdriver and a chisel..maybe other stuff. $25

Carftsman ratchets and stuff
pair of 1/4 extansions (one very rusty) $2 (sold)
4" craftsman adjustable wrench with owner mark $5
nice 1/4 craftsman breaker bar $4 (sold)
Craftsman 1/2 t handle $4 (sold)
Nice old Carftsman 3/8 ratchet $8
nice long handle craftsman 3/8 ratchet $9

Craftsman extensions. Two 4pc sets and a pair of 1/4" extensions. $5 for each 4pc set and $3 for the 1/4" set....or $10 for all 10 pcs. (sold)

Last random pic

Klein 5pc screwdriver lot..some pretty rough. $10
Old Blue point valve cpring compressor..missing knob but a simple nut should get it working$5
Slip joint plers $1 each
Channellock needlenose $4
Yankee drill. $5
Crescent vise grip $3
Adj wrench $2
old channelock $2
Unknow orange handle KD tools tool
nice well made linesman plier $3
Husky stubby driver $1
some eurotrash #1 philips screwdriver $2
18wheeler trailer light tester. L.E.D's light up so you know wiring at plug is working $15

purevl · Apr 14, 2012

I'll take the SK extensions too.

back2class · Apr 14, 2012

Ok...last of it is here.

Kennedy roll cart $80 (pickup in far north GA only)
Hout top chest $40 (may ship if you cover the expense and hassle)

Old Sawyer vise Oswego, NY. Shows little use at all (no hammer marks or bent handle...just no signs of use really) and nice long slide. Only issue is missing one of the jaws. Would be very simple to machine one as it is just a 1/2 slot in a piece 3/4" steel. or just grind the side of the vise with the missing insert flat like many other quality vises. Oh, one screw for the jaw insert needs to be removed as it's broken off. I paid $65 and want that out of it. Well worth it. Pickup only unless you want to pay like $35 in shipping.

Next pic is snap-on 1/2 drive impact $65 shipped
snap-on air hammer $55 shipped
Stud extrctor set $15 shipped (sold)

Last pic is mac hand impact driver $36 shipped
CP zip gun $30.not tested yet but will test before I ship.

Jarhead0408 · Apr 14, 2012

If he still wants it IndyEngineer can take the, Craftsman long handle fully polished 3/8 $20 Frees me up to get something different.

I'll take these too please....

nice 1/4 craftsman breaker bar $4
Craftsman 1/2 t handle $4

Thanks!

back2class · Apr 14, 2012

Jarhead0408 said:
If he still wants it IndyEngineer can take the, Craftsman long handle fully polished 3/8 $20 Frees me up to get something different.

I'll take these too please....

nice 1/4 craftsman breaker bar $4
Craftsman 1/2 t handle $4

Thanks!

OK, i'll let him know

back2class · Apr 14, 2012

IndyEngineer said:
Cancel the Armstrong f-a-513/8 $8

I'll take Craftsman long handle fully polished 3/8 $20 instead.

ou got it..Jarhead let it go for you.

back2class · Apr 14, 2012

I am open to offers too if you think I am a little high on something or you are interested in buying several things. Alot of it I priced pretty low just to move it..but there are a few things I am willing to work an even better deal on.

Jarhead0408 · Apr 14, 2012

IndyEngineer just PM'd me, he doesn't need the Craftsman long handle fully polished 3/8 $20 anymore, but if you don't mind I'll still let it go.

bdeaton2 · Apr 14, 2012

Dibbs on the "Snap-on F-731 long handle flex head. 3/8 $45" and an offer on the "snap-on pozidrive screwdrivers in p1 and p2 $20 for the pair".

krc328ic · Apr 15, 2012

I'm in for these MAC combos:

metric combos 17,16,15,13,11 $28

7/16 and 3/8 $8 for both.

PM Sent :thumbup:

burnin53 · Apr 15, 2012

I'll take both rusty s-k wrench piles,also.

StevenB · Apr 15, 2012

Do you have 1/2" & 1/4" flex head ratchet?

vdt1977 · Apr 15, 2012

back2class said:
Stud extrctor set $15 shipped

Craftsman extensions. Two 4pc sets and a pair of 1/4" extensions. $5 for each 4pc set and $3 for the 1/4" set....or $10 for all 10 pcs.

pair of 1/4 extansions (one very rusty) $2

Snap-on short 3/8 impact extenson $6

8 snap-on hex sockets $23

Snap-on compression tester...I think. Goes to 800psi. Diesel I guess. What you see is what you get. $35

pm sent on this stuff

lowbucktruck · Apr 16, 2012

Next in line for the Sk Socket extension lot (7pcs) $15 (if PUREVL doesn't come thru.)

PinkLinc · Apr 16, 2012

Interested in the Craftsman Kromedge tap and die set if it's metric. Let me know.

dudutzu905 · Apr 16, 2012

PinkLinc said:
Interested in the Craftsman Kromedge tap and die set if it's metric. Let me know.

+1
also interested in the snap on socket lot from last picture post #18
also if nobody wants the cman 3/8 long ratchet I'm interested

eborcim · Apr 16, 2012

2nd on the craftsman extension lots and the old Armstrong 3/8 ratchet. Thanks for doing your ad like the rules state and not posting a new one every day. Good prices guys on some good buys. :thumbup:

Deafautotech · Apr 16, 2012

i would like take those:

Matco 5/8 deep spark plug scket. $50 on matco's site. $18 to you.
Mac 32mm impact socket $9
SK 3/4" extension (the kind without detent ball) $5 is it as impact grade?
m21cl Mac 21mm wrench

as send the pm

RATCHETS..snap-on, matco and other tools cheap all day

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Active member

Well-known member

Attachments

Member

Active member

Active member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member