kellie
New member
- Location
- Evergreen, Colorado
- Price
- 800
I'm new in these parts, I was referred to this site by some folks over at Bimmerforums. I figured this would be a good place to try to sell these guys.
I have 5 Dayton unit heaters, model number 2YU74.
Electric Unit Heater, Fan Forced, 15 kW, Btu 51.2 x1000, Voltage 208, 60 Hz, 1-3 Phase, 72 Amps AC, Air Temp Rise 52 F, 910 CFM, Height 21 3/4 In, Width 19 In, Depth 13 3/4 In, Max Mounting Height 11 Ft, Horizontal Air Throw 35 Ft, Vertical Mounting H 20 Ft, Housing Material 20 Gauge Steel, Neutral Gray Powdercoat Housing Finish, Vertical or Horizontal Mounting Position, Requires 5/16 in -18 Threaded Rod for Ceiling Installation, Agency Compliance UL / CUL #E154234
All 5 were purchased about 2.5 years ago, used during a building project, and have been stored indoors while not in use. They are in excellent condition. These heaters retail new for about $1100-1200. I am asking $800 or best offer per heater, and I'd be willing to negotiate if you take more than one.
I have 5 Dayton unit heaters, model number 2YU74.
Electric Unit Heater, Fan Forced, 15 kW, Btu 51.2 x1000, Voltage 208, 60 Hz, 1-3 Phase, 72 Amps AC, Air Temp Rise 52 F, 910 CFM, Height 21 3/4 In, Width 19 In, Depth 13 3/4 In, Max Mounting Height 11 Ft, Horizontal Air Throw 35 Ft, Vertical Mounting H 20 Ft, Housing Material 20 Gauge Steel, Neutral Gray Powdercoat Housing Finish, Vertical or Horizontal Mounting Position, Requires 5/16 in -18 Threaded Rod for Ceiling Installation, Agency Compliance UL / CUL #E154234
All 5 were purchased about 2.5 years ago, used during a building project, and have been stored indoors while not in use. They are in excellent condition. These heaters retail new for about $1100-1200. I am asking $800 or best offer per heater, and I'd be willing to negotiate if you take more than one.