Show Your Williams

nine4gmc · Dec 25, 2012

Here is what I have so far, I'm collecting Superrench. I have some duplicates and other styles(not pictured) for sale/trade but these I plan on keeping and adding to the collection as I find them. Show your Williams!

rshadd · Dec 25, 2012

archirelic · Dec 25, 2012

rshadd said:

Is that a specific set you ordered or did you piece it together?

rmsg0040 · Dec 25, 2012

My only 2,

bw-39 special 1 - 1/4 by 1 - 1/2
18mm supercombo (bought to compare against proto ASD, still waiting on it though)

rshadd · Dec 25, 2012

archirelic said:
Is that a specific set you ordered or did you piece it together?

It's a six piece phillips set... JH Williams #100P-6PD

The six piece slot drivers are 100P-6SD.

archirelic · Dec 25, 2012

Thanks!

ihateminimumwage · Dec 25, 2012

rshadd said:
It's a six piece phillips set... JH Williams #100P-6PD

The six piece slot drivers are 100P-6SD.

Good ol' ZTSupply. :rocker:

ihateminimumwage · Dec 25, 2012

I inherited a lot of tools quite a few years ago, mostly being a mix of OLD Craftsman, Plomb/Proto and Williams (with some misc Snap-On, Blue Point, MAC, Stanley, etc). So here's the old stuff first.

Breakers, T-bars, a couple of 'Superrachets', my 3/8 drive extension (all I still use almost daily, besides the ratchets)

1/4" drive sockets

3/8" drive sockets (missing 13/16" has been replaced with a new Williams USA)

1/2" drive sockets (the rest of my completed set is old Craftsman & Proto)

3/4" drive sockets

Screwdrivers

Pliers (with Plasti-dip handles, still used daily)

3/8" drive phillips and swivel (would've been in 1st pic, but found them after I took it)

Now the new Williams stuff.

1/4" drive Standard

1/4" drive Metric (with a few misc Snap-On sockets mixed in, they are EXACTLY the same)

3/8" drive Metric (Williams USA shallows, Williams Taiwan deeps)

REALLY pleased with the quality of the new Williams stuff, both USA (Snap-On) and Taiwan (Blue Point). I'll be buying a lot more of it in the near future. :thumbup:

nine4gmc · Dec 25, 2012

thanks for posting guys, those hard handle screwdrivers are sick with it, nice!! Good info on the newew Taiwanese stuff too, I was weary.

nine4gmc · Dec 26, 2012

Picked up a new habit at the pawn shop today :lol_hitti

I found out there are metric clones to the Superrench in Vulcan brand. If anyone has any of this set for sale/trade, PM me please :beer:

davesnothere · Dec 26, 2012

I'm pretty sure I have a williams vulcan 20mm wrench at home.

wornoutoldman · Dec 26, 2012

I had a great Vulcan to.ols dealer in the eighties. Now I wish I'd spent more money with him.

Joe B. · Dec 26, 2012

nine4gmc said:
Picked up a new habit at the pawn shop today I found out there are metric clones to the Superrench in Vulcan brand. If anyone has any of this set for sale/trade, PM me please

I grabbed one of those Vulcan wrenches as part of a huge tool lot I purchased. I also picked up a couple of both 3/8 and 1/2 superratchet repair kits.

Roland-5.0 · Dec 26, 2012

rshadd said:

Looks just like the snap on screw drivers :headscrat

allinon72 · Dec 26, 2012

Roland-5.0 said:
Looks just like the snap on screw drivers

That's ironic

hickmlg09 · Dec 26, 2012

I have some williams sockets. Would have to pull them out of toolbox thou. Too cold to go outside right now. Finally getting some snow here

I want to get the super wrenchs. Always see them at the flea market when I go. They are pretty nice tools.

Don 18 · Dec 26, 2012

Roland-5.0 said:
Looks just like the snap on screw drivers

Williams is a Snap-On company, so they get some hand-me-down designs from the older product lines. Sockets look just like the SO ones as well

Here are mine:

rjwilliams · Dec 26, 2012

I have a few misc Williams items but this is all of my Williams items from the 90s.

[/IMG]

Hyster Gareth · Dec 27, 2012

Top Display :thumbup:

Mohawk Dave · Dec 27, 2012

Here's one of my sets...

(I also have a 7 pc? open end set that I'd sell...I'll get photos if anyone is interested.)

2oolhound · Dec 27, 2012

Cool crows foot crescent wrench!

Here's some of my few pieces:

1 1/4 SUPERWRENCH

3/8 100 Ft Lb Torque Wrench

I thought these were the same company but I was wrong and Williams England is a separate company. These are 1/2" Dr. Whitworth sockets made in England, they are nice quality.

Uploaded with ImageShack.us

pfctblu · Dec 27, 2012

I've been impressed with my B52-EHA so I ordered these Williams flex ratchets to add to my collection. The S52 really is beefy, and for under $50 a real bargain.

Beerman · Dec 27, 2012

Vulcan was Williams attempt to enter the mobile tool market . not sure how long their trucks were on the road, but don't think they lasted long.

Beerman

ejkuhl · Dec 27, 2012

Most of my Williams. The b54 flex is by far my favorite ratchet. The b52 is in need of a rebuild.

mmill · Dec 28, 2012

Here is a 3 1/2" Williams I used to use when I worked at the natural gas plant.

kursplat · Dec 28, 2012

love that crows foot crescent :drool:

BMB · Dec 29, 2012

Williams 3/4" ratchet pawn shop find.

Subyroo651 · Dec 29, 2012

My Williams so far, SuperCombos. Amazing wrenches :bounce:

Metric 7-21mm and SAE 1/4 - 7/8

If anyone has these racks in Blue, I want to buy them!

kippieland · Dec 29, 2012

Subyroo651 said:
My Williams so far. Amazing wrenches
Metric 7-21mm and SAE 1/4 - 7/8

My favorite wrenches right there! :willy_nil

nine4gmc · Dec 29, 2012

I like where this thread is going!! Really nice Williams tools, some I never knew existed.

John316 · Dec 29, 2012

The Standard 1/2" is my goto for that drive size. Really stout ratchets! The 3/8 is kind of like a CM/Easco RHFT in feel, but the 1/2" are MONSTERS.

Oneguy · Dec 31, 2012

I just got an s-52 off eBay as well as 26 new supercombos. I'll post pics when they arrive. But I am pretty excited to get rid of my Home Depot bought huskys.

carterbeauford · Dec 31, 2012

http://www.ebay.com/itm/J-H-William...131?pt=LH_DefaultDomain_0&hash=item4abfe90823

thought you Williams guys would like this

Oneguy · Dec 31, 2012

carterbeauford said:
http://www.ebay.com/itm/J-H-William...131?pt=LH_DefaultDomain_0&hash=item4abfe90823

thought you Williams guys would like this

My wallet and my wife both hate you right now

daddy2coull · Dec 31, 2012

Don 18 said:
Williams is a Snap-On company, so they get some hand-me-down designs from the older product lines. Sockets look just like the SO ones as well

Here are mine:

If only you could buy them in the UK, I'd take the screwdriver handles over the snap on junk any day

Outlander · Dec 31, 2012

Compliments of my long gone Uncle

nine4gmc · Dec 31, 2012

Real nice!

Here are some Vulcan Metric DOE I just picked up from ebay, thank you "oldtoolbox" if you are here!! They are like new, just a chrome chip on one. I got duplicates of the 12/14mm and missing the 13/15mm. Willing to sale/trade the extra 12/14.

AL` · Jan 14, 2013

A mix of old and new. Old ratchet, wrench and three sockets - all that remain of my grandfather's Williams stuff except a few Fleet and Snap-on sockets not included in the photo. And some new screwdrivers.

nine4gmc · Jan 15, 2013

I'm really liking those hard handle screwdrivers!

rshadd · Jan 15, 2013

JH Williams #100P-6SD

Show Your Williams

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Member

Attachments

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Active member

Well-known member

Active member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member