- Location
- Boston
- Price
- Varies
Everything listed is complete sets. Reason for selling should be fairly obvious. I have way way too many wrenches.
Note that I ship via USPS Priority unless otherwise noted or asked and shipping prices are included.
Payment primarily done via Paypal
also I can do a Personal Check/MO to satisfy those that don't like Paypal. Just keep in mind the additional delay with the latter payment method.
Snap-On OEXM710B 10-19mm.
Purchased these by accident thinking they were FD+. Seller was kind enough to be a cheapskate and sent them in an envelope and pocketed $4 of the shipping charge so the wrench tray got kind of crushed but its pretty flimsy to begin with so no big loss. I cleaned them all very thoroughly and they basically look un-used. Only defect worth mentioning is some pitting on the 13mm that looks like a defect when it was plated. I'm sure it could be exchanged or warrantied if you really cared but it doesn't effect the wrench at all, just wanted to mention it, the rest are in awesome condition.
List $310.00
Asking $155.00 Sold
------
Hazet 600N 17Pc Metric Set
Set should be considered like new. No blemishes on any of the wrenches, all but the 10 and 14mm were never even used and the two that were used don't show it.
Includes 7-19, 21, 22, 24, 27mm
Asking $250.00 Sold
Hazet 600NA 10Pc Standard Set
Includes 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1
The 1/4", 5/16, 3/8" and 7/16" do show a few signs of use, the rest are basically new.
Asking $160.00 Sold
--------
Hazet 606 12pc Reversible Ratcheting Combination Wrenches
Includes 8-19mm + a 3pc set of ratcheting wrench adapters so you can use the wrenches with sockets and 1 bit adapter. A fairly nice foam tray is also included.
2 Wrenches were used a couple times (10 and 14mm). The rest are new. Note there are some very light surface rust spots dotting a few of the wrenches here and there. Fairly hard to notice in the photos. I'll hit them with some scotch brite and wipe them off with some oil which should clean them up a bit. I'm going to leave these images fairly huge so click on the thumbnails to see them in detail.
Asking $225.00 Sold $200
-----
Craftsman 8Pc Standard USA Made Reversible Combos
Includes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"
Essentially new condition, 7/16" wrench has been used a couple times but that's it. Again these are the older stock USA made version.
Asking $60.00 Sold
-----
Cornwell WCP17LST 7pc Extra Long Combination Wrenches Standard
3/8-3/4"
Like new. Only blemishes are very light scratches from the packaging. Packaging itself is crummy plastic and a little beat up but included. For those that arent familiar, yes they're suppose to only be stamped on one side, Cornwell leaves one side of their extra longs clean for some reason.
List $282.00
Asking $130.00
------
MAC SCL11LKS 11Pc Extra Long Combination Set With Rack
Sizes include 7/16"-1" (missing 3/8")
They're in used but very very decent condition (many could be mistaken for new) no abuse, no chips/rust etc.. There is one scratch on the 1" wrench but appears fairly superficial and isn't deep. Also note the 1" wrench has its stampings on opposite sides of the beam compared to the others. Don't know if that's intentional or a mistake and obviously it effects nothing but just wanted to mention it.
List $602.99 (probably closer to $560 without the 3/8")
Asking $210.00 Sold
------
Matco SGRBLM10T 10Pc Pro-Swing Double Box Ratcheting Wrenches (1 Side Ratcheting 1 side fixed)
10-19mm
All are in new condition. I believe the new versions are Taiwan so bearing that in mind all of the ones i'm selling say "Forged [In] USA" on the beams. Very nice set.
List $371.00
Asking $200.00 (Sold $175.00)
------
Gearwrench 81902 Non-Ratcheting 17pc Long Pattern Combo Set (Metric)
Includes 6-22 No Skips
This is my beater set but honestly all the wrenches are in like new condition. The open ends do have a no-slip feature and the sets were made in Taiwan (purchased this and the standard set below before they started manufacturing in China).
Street Price $70.00
Asking $60.00 Sold
------
Gearwrench 81901 Non-Ratcheting 16pc Long Pattern Combo Set (Standard)
Includes 1/4" to 1-1/16" No Skips
Same as the metric set above in terms of condition.
Street Price $85.00
Asking $70.00 Sold
If purchased together i'll drop the price to $120.00 shipped for all 33 wrenches.
I'll throw these into the mix as well
87CFO Snap-On Diagonals. I hate these things due to the PowerEdge design so these two are pretty much new. Some very minor surface rust but the cutting edges are in great condition.
List ~$40.00
My price $25.00 Shipped Each. (Sold)
--------------------
IR 105-D2 1/4" Air ratchet. Its a little guy, very quiet (why I purchased it). Works very well. Only had it about 1 year and in that time its been used fairly little, always kept oiled. Has the boot installed on the head. Only reason i'm selling it is I have a FAR2500 which has a much more finger friendly reverse lever otherwise i'd be keeping the IR. Before anyone asks COO on the IR is China however it is of very good quality and priced according.
Street Price ~$90.00
My Price $65.00
--------------------
Next set is a basic magnetic driver/bit set. The set is quite large, and is missing a couple bits but i'll be damned if I know what they were. Never found myself trying to find what was missing. A completest could locate whats missing and fill the missing spots in for a few bucks i'm sure.
P/N SPM123B. I think list was just north of $200 but cant really recall. My price $90 obo. Sold
-----------------
Next pretty much new Matco Top Torque II Screwdriver set. Only used a few of the drivers for a couple tasks. Handles aren't for me, so moving them along.
10pc Promo set. List price is $170. My Price $105.00 Sold
Includes 5 Flats, and 5 Phillips (#1, #2 Stubby, #2 8.5", #2 11.5", #3)
----------------------
Matco 1/4" Set P/N SAMD146TA.
4mm-15mm no skips (includes 4.5 and 5.5mm sizes). Set is like new.
List $265.00
My price $90.00 Sold
Note that I ship via USPS Priority unless otherwise noted or asked and shipping prices are included.
Payment primarily done via Paypal
also I can do a Personal Check/MO to satisfy those that don't like Paypal. Just keep in mind the additional delay with the latter payment method.
Snap-On OEXM710B 10-19mm.
Purchased these by accident thinking they were FD+. Seller was kind enough to be a cheapskate and sent them in an envelope and pocketed $4 of the shipping charge so the wrench tray got kind of crushed but its pretty flimsy to begin with so no big loss. I cleaned them all very thoroughly and they basically look un-used. Only defect worth mentioning is some pitting on the 13mm that looks like a defect when it was plated. I'm sure it could be exchanged or warrantied if you really cared but it doesn't effect the wrench at all, just wanted to mention it, the rest are in awesome condition.
List $310.00
Asking $155.00 Sold
------
Hazet 600N 17Pc Metric Set
Set should be considered like new. No blemishes on any of the wrenches, all but the 10 and 14mm were never even used and the two that were used don't show it.
Includes 7-19, 21, 22, 24, 27mm
Asking $250.00 Sold
Hazet 600NA 10Pc Standard Set
Includes 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1
The 1/4", 5/16, 3/8" and 7/16" do show a few signs of use, the rest are basically new.
Asking $160.00 Sold
--------
Hazet 606 12pc Reversible Ratcheting Combination Wrenches
Includes 8-19mm + a 3pc set of ratcheting wrench adapters so you can use the wrenches with sockets and 1 bit adapter. A fairly nice foam tray is also included.
2 Wrenches were used a couple times (10 and 14mm). The rest are new. Note there are some very light surface rust spots dotting a few of the wrenches here and there. Fairly hard to notice in the photos. I'll hit them with some scotch brite and wipe them off with some oil which should clean them up a bit. I'm going to leave these images fairly huge so click on the thumbnails to see them in detail.
Asking $225.00 Sold $200
-----
Craftsman 8Pc Standard USA Made Reversible Combos
Includes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"
Essentially new condition, 7/16" wrench has been used a couple times but that's it. Again these are the older stock USA made version.
Asking $60.00 Sold
-----
Cornwell WCP17LST 7pc Extra Long Combination Wrenches Standard
3/8-3/4"
Like new. Only blemishes are very light scratches from the packaging. Packaging itself is crummy plastic and a little beat up but included. For those that arent familiar, yes they're suppose to only be stamped on one side, Cornwell leaves one side of their extra longs clean for some reason.
List $282.00
Asking $130.00
------
MAC SCL11LKS 11Pc Extra Long Combination Set With Rack
Sizes include 7/16"-1" (missing 3/8")
They're in used but very very decent condition (many could be mistaken for new) no abuse, no chips/rust etc.. There is one scratch on the 1" wrench but appears fairly superficial and isn't deep. Also note the 1" wrench has its stampings on opposite sides of the beam compared to the others. Don't know if that's intentional or a mistake and obviously it effects nothing but just wanted to mention it.
List $602.99 (probably closer to $560 without the 3/8")
Asking $210.00 Sold
------
Matco SGRBLM10T 10Pc Pro-Swing Double Box Ratcheting Wrenches (1 Side Ratcheting 1 side fixed)
10-19mm
All are in new condition. I believe the new versions are Taiwan so bearing that in mind all of the ones i'm selling say "Forged [In] USA" on the beams. Very nice set.
List $371.00
Asking $200.00 (Sold $175.00)
------
Gearwrench 81902 Non-Ratcheting 17pc Long Pattern Combo Set (Metric)
Includes 6-22 No Skips
This is my beater set but honestly all the wrenches are in like new condition. The open ends do have a no-slip feature and the sets were made in Taiwan (purchased this and the standard set below before they started manufacturing in China).
Street Price $70.00
Asking $60.00 Sold
------
Gearwrench 81901 Non-Ratcheting 16pc Long Pattern Combo Set (Standard)
Includes 1/4" to 1-1/16" No Skips
Same as the metric set above in terms of condition.
Street Price $85.00
Asking $70.00 Sold
If purchased together i'll drop the price to $120.00 shipped for all 33 wrenches.
I'll throw these into the mix as well
87CFO Snap-On Diagonals. I hate these things due to the PowerEdge design so these two are pretty much new. Some very minor surface rust but the cutting edges are in great condition.
List ~$40.00
My price $25.00 Shipped Each. (Sold)
--------------------
IR 105-D2 1/4" Air ratchet. Its a little guy, very quiet (why I purchased it). Works very well. Only had it about 1 year and in that time its been used fairly little, always kept oiled. Has the boot installed on the head. Only reason i'm selling it is I have a FAR2500 which has a much more finger friendly reverse lever otherwise i'd be keeping the IR. Before anyone asks COO on the IR is China however it is of very good quality and priced according.
Street Price ~$90.00
My Price $65.00
--------------------
Next set is a basic magnetic driver/bit set. The set is quite large, and is missing a couple bits but i'll be damned if I know what they were. Never found myself trying to find what was missing. A completest could locate whats missing and fill the missing spots in for a few bucks i'm sure.
P/N SPM123B. I think list was just north of $200 but cant really recall. My price $90 obo. Sold
-----------------
Next pretty much new Matco Top Torque II Screwdriver set. Only used a few of the drivers for a couple tasks. Handles aren't for me, so moving them along.
10pc Promo set. List price is $170. My Price $105.00 Sold
Includes 5 Flats, and 5 Phillips (#1, #2 Stubby, #2 8.5", #2 11.5", #3)
----------------------
Matco 1/4" Set P/N SAMD146TA.
4mm-15mm no skips (includes 4.5 and 5.5mm sizes). Set is like new.
List $265.00
My price $90.00 Sold
Last edited: