Chinese Cut50 Plasma Cutter group buy interest

***UPDATE - Some sad news***​

As some of you know already, I have started to become incredibly busy with my real business, and I've had to put this to the back burner. Well it became official today that I won't be able to continue forth with the efforts. Sounds like there might be someone here picking up on it however.

***End of the update. Going to leave everything below for anyone who cares to pick this up***​

Alright, so someone had a thread as a review of the Cut 50F plasma cutter from China. Buyer said they paid about $300 for it. The unit has pilot arc, is 50 amps of cutting power, 220V. Quite a few people seemed interested in it so I thought I would look into it.

If we can get 50 people interested in a buy we can get them for $190 each. The more people the better price we can get. This is just on my first inquiry, and when I have committed people I'm sure I can get a better price. Please let me know if you are interested by posting here


50 Amp
220V Single Phase
DC
Range from 20-50amps
Pilot Arc
Max Cutting Thickness: .75"
Clean Cut thicknesss: .6"
Comes with:
1 Torch (~10 ft)
1 Ground (~6.5 ft)
1 Air regulator

Warranty: I've been told there is a warranty on the units for 1 year, not sure how that works, still working on figuring that end out.

Yes, there will be a deposit, and then a full front fee through paypal when it's time to order. Right now I'm trying to get a good number to negotiate with, then when I'm closer to a final number, I'll do deposits, then when it's order time, take full money. I am trying to keep everyone in the loop as much as possible. Things don't happen over weekends. Feel free to PM with questions you might have, I do my best to respond within a few hours.

The list:
1. J King
2. Raddksn
3. eddyyy302
4. Beemer533
5. seans883
6. thatonedude
7. Catadj78
8. jptbay
9. ybnormal70
10. Bobioz1
11. rslaback
12. bobbycos
13. Bobf
14. MoparTrucks
15. sleepy127
16. malbojah
17. heytrid
18. jmlcolorado
19. big_papa
20. Slackerzinc
21. ds350
22. ClickClickBoom
23. Ohmthis
24. Rccrawlerguy
25. LakeDowPow
26. CrookedConcepts
27. bgoodwin
28. loranger
29. Zeke
30. rprice
31. kd3pc
32. hbabler
33. doojus
34. tarbellb
35. Mridolfo
36. warweapon762
37. 808state
38. streetglider
39. CGarcia
40. shepherd
41. VDubJoe
42. bfdladder10
43. tomd
44. ishiboo
45. joebachor
46. see pictures
47. raddksn
48. JonShep82
49. nine4gmc
50. whyNick?
51. m.doza
52. Benw455
53. -->
54. chris29ford
55. boilermanc
56. JoeMopar
57. Moose364
58. tt455
59. organ
60. wasfuzz
61. Keith5064
62. wyo george - 3 units
63. coraviar Ed
64. brianh
65. shadowRuleZ
66. COLT45223
67. blind
68. Packfan 123
69. FMC1959
70. Stealership
71. bucksnort59
72. JayMC
73. Littleponderosa
74. mkparker
75. gungatim
76. oldschool59
77. YatYas
78. yamatitan
79. tireman
80. 1969
81. Barrymaxx
82. pwhittle
83. tyyost
84. AdamH
85. colonel25
86. Semohandyman
87. 188slo50
89. TapperMan
90. wheats71
91. OGJordan
92. charlesamorris22
93. rixtrix1
94. boostaddiction
95. doctordirt
96. jrcampbe
97. wvjeepers
98. jpinca
99. cardinal96ss
100. onefastgsx
101. kurt4440
102. alwaysFlOoReD
103. eddiemeddiem
104. BDBLK2K3
105. CreteCoater
106. Travo131
107. whitehatch
108. metalart
109. BlackLead
110. gwunsch
111. rexpittman
112. CarterKraft
113. Nitroman15
114. wyo george
115. JZHeyde
116. madcrisis
117. TLCObsession
118. ncfh
119. gkring
120. amac70
121. Badasssapper67
122. Monkey Milk - pending shipping cost
123. jask - in Canada
124. Aquamoose
125. Rehbein
126. logixjock
127. lonesouth
128. HoZr
129. ikk - pending shipping cost & consumables
130. lilthom
131. logikal
132. ejs
133. jcbarry
134. mb190sl
135. mp_tx
136. Boost Creep
137. 4cyclic
138. neonizagas
139. mlogan24
140. autoclassicnut
141. tiggi
142. landshark99
143. d money
144. olds463
145. mast240
146. roadburner - pending shipping cost
147. jethrob
148. Will S. - pending shipping cost
149. padstack - pending shipping cost
150. Blastereod
151. 1940_dodge
152. txan
153. SHAZZAM
154. swedeking
155. Jarhead0408
156. rustyshakelford
157. bl00
158. gayler
159. KyleQ
160. GLK1bronc
161. Maui
162. nhfatboy
163. brupard
164. J66442
165. Ben Buck
166. not-required - pending shipping cost
167. jb3426
168. jethrob - pending details
169. tonydanzah
170. D_Will21
171. dklic6 - pending shipping cost
172. 0759i6
173. brewchief
174. 63roundbody - pending details
175. Shadowline - pending shipping cost
176. 1973Bronco
177. coperhed
178. BoureeOne
179. 66broncogarage
180. MScott
181. Ameshel
182. Waltrip88
183. cwii
184. fgl123
185. Disney
186. OldracerJones
187. johnehr
188. Surreal001
189. edboyles
190. kluckfab
191. BroncoDave
192. Wojo
193. mlund
194. bigredmf - pending shipping cost
195. LXCam
196. KSJeff - pending shipping cost
197. jski67
198. crf731
199. iigs
200. TS3g
201. HammerMechanic
202. akcooper9
203. mikewatson
204. boardslide
205. dvo
206. SlowAl
207. gh0st
208. petethekiller
209. boman
210. sk farmer - ??? asked if it was too late...
211. Fredfox32
212. Farfegnugen
213. admactanium
214. Flatland Dave
215. ghost68
216. wbrian63
217. Tuscani2718
218. bushman
219. hyghlndr - pending shipping cost
220. Greeny
221. bmxdad
222. slipknot

List up to date as of 1/12/15 at 4:00 PM Pacific

For that price I'm in.

Wheres the review?

If it's a decent piece of junk, I'm in.

I'm interested, what about shipping/distribution?

ncfh said:

Wheres the review?

If it's a decent piece of junk, I'm in.

Click to expand...

http://www.garagejournal.com/forum/showthread.php?t=271629&highlight=china+plasma+cutter
There is the link to the thread

raddksn said:

I'm interested, what about shipping/distribution?

Click to expand...

Sounds like I would have a pallet of the units brought to my business. From there I would distribute them to everybody via FedEx or UPS. I'm still in the early stages of the details, I'm trying to see if there is enough interest. I have a freight broker who speaks Chinese who can work with me so if this is a success I can most likely source more Chinese things.

I'm in at that price. I was researching after that previous thread.

Dan

I'm in as well, I could definitely use one for the occasional project... I would like to know what the shipping to NY from Seattle would be though..

BTW, thanks for putting this together

I'm in.

I am in but would like to know more details.

Thanks for the effort of putting this together as well

Beemer533 said:

I'm in as well, I could definitely use one for the occasional project... I would like to know what the shipping to NY from Seattle would be though..

BTW, thanks for putting this together

Click to expand...

I'll be working out a shipping quote once the buy is in order, or is further along. I'll get a better price sending 50 units at one time that weigh about 20lbs

Catadj78 said:

I am in but would like to know more details.

Thanks for the effort of putting this together as well

Click to expand...

Updated original post with more info

Sign me up

interested

I'm in at this price also! Sign me up... Does the $190 include shipping?

Kevin

If it's the same one in that thread, I'm in. Thanks for doing this.

ybnormal70 said:

I'm in at this price also! Sign me up... Does the $190 include shipping?

Kevin

Click to expand...

Currently it does not. If I can get them lower on their price it will though. I'll continue to update the original post once I can get more info/bargain with them more. I wanted to have some interest before getting more serious with it as to not waste their time or mine. Most likely would be about $10 of shipping though based on past experience on packages of this size/weight at 50 units

Bobioz1 said:

If it's the same one in that thread, I'm in. Thanks for doing this.

Click to expand...

I'm pretty sure it is, though I wouldn't be able to confirm it with out some more info off the unit.

If we are looking at $200 shipped, I'm in.

contact UPS customer service about bulk rate shipping, you can strike a deal and then i will be able to deliver my own unit

i'm in

sounds interesting.

I have a small Hobart but for that price I'd buy one just to see how it does.
Put me in.

bobbycos said:

contact UPS customer service about bulk rate shipping, you can strike a deal and then i will be able to deliver my own unit

i'm in

Click to expand...

Yeah, that's what I'll do. Once I get to about 30 people in I'll be moving a lot more forward with this. Right now I'm just making sure there is enough interest.

I'm interested too....for that price you cant really go wrong.

Im in

I would be interested, I imagine my buddy would be too for that price.

In here! Possibly for two.

OK, I have been lurking here for a month or two and I kept telling myself to make time to sign up.

This group buy possibility made me stop what I was doing and register.

So, if newbies are welcome, please put me on the list for one.

Thanks!

I am in too!

big_papa said:

OK, I have been lurking here for a month or two and I kept telling myself to make time to sign up.

This group buy possibility made me stop what I was doing and register.

So, if newbies are welcome, please put me on the list for one.

Thanks!

Click to expand...

Nope. Not allowed. Go,back from the depths in which you came.

JUST KIDDING,!!!
Welcome aboard! It's all downhill from here.

I'm in. + consumables

Interested too.


Sent from my iPad using Tapatalk

Interested

big_papa said:

OK, I have been lurking here for a month or two and I kept telling myself to make time to sign up.



This group buy possibility made me stop what I was doing and register.



So, if newbies are welcome, please put me on the list for one.



Thanks!

Click to expand...

Welcome! It doesn't matter if you're new or not. I'll be getting some more info tomorrow morning

Don't forget the possible duty fees.

I may be in as well depending on the final price.

Canada ?

I'm in!!! Can you check on a special on consumables too? If that is too much right now I understand. Thanks for doing this!

Save yourself the $$$, it is a piece of sh*t..... Had my Cut 50D earlier models... of the same ****. tigs / Cut first few times ( first 5 months) then died, can't find the seller or his cheesy website anymore on ebay after 6 months or so..

I would buy one for that price.

I'm in. Thanks!

Sign me up!