My garage clean up / misc auto and home tools

Updated!!! Garage clean up / misc auto and home tools

**Updated 9/11**

PRICING:

Most of the homeowner tools have prices listed.

I have not priced most of the machinist tools because I haven't had time. I have sold a few items to members on here already. I just go to ebay, find the average sold price, remove shipping (so it can be combined with multiple items) and cut off a few more dollars. I'm trying to be fair. Feel free to shoot me a fair offer on anything you're interested in.

Any reasonable offer will be considered. Shipping on the smaller items is not included unless stated. I will combine shipping whenever possible.

I stand behind everything. If you are not happy with it I will give you a refund. I have 100% feedback on ebay, take a look.

I can take more pictures of anything if requested.

Let's make a deal!

Thanks,

Matthew

Feedback page:

http://www.garagejournal.com/forum/showthread.php?t=283245

**I am open to trades on anything. I prefer modern automotive tools.**

Examples -

-Proto SAE hex socket set (found metric)
-reversible ratcheting combo wrenches
-anything interesting

The following items are listed on ebay. If you contact me on here, I'll end the auction and take the 10% ebay fee off the price.


(none)

UPDATED 8/13 Machinist tools

My father was a journeyman toolmaker/machinist who retired a few years ago due to health reasons. I am beginning the long process of sorting out his extra/leftover tools for sale. These were almost all higher end machining tools - Starrett, Brown & Sharpe, Mitutoyo, General, Lufkin, etc. At this point I only have a few photos until I begin the catalog process. Please send me a message with any questions.


Items not listed on ebay:


Lufkin radius gauge set:



Misc large wrenches, 2 are industrial finish snap on, the others are no name.



Starrett Surface Gage (missing scribe)




Browne & Sharpe 651 and Fowler 60* angle gauges




Ritter dental small chuck




Starrett squares (engraved, surface flaws)





Browne & Sharpe for Pratt Whitney micrometer



Lufkin #138 squares



3" millers falls square




Starrett 178A and Browne & Sharpe 627D



Lot of Craftsman, unbranded USA, and mastertool feeler gauges (craftsman sold)





Misc Germany and USA calipers



USA 6" rule



Lufkin 680A inside micrometer



Well used large micrometers B&S, Lufkin, Starrett



Greenfield Tap & Die No 7 - $25 shipped






Various Seco / Secolor bits





Misc gauge blocks / various / most say Ford and CEJ or Johannson on them





Continued below.

Cleveland Twist Drill center finder



Misc machine fuses





Interapid 312B-20



Alina M31



Gem indicator (missing feeler end)





Photobucket has over 100 photos / many are duplicates depending on when I took the photo:

http://s4.photobucket.com/user/matatk/library/Sale

Examples of items: Boxed Starrett 0-6" micrometer set, depth gauges, setup / 123 blocks, inside micrometers, radius gauges, collins quick change adapters, lathe/machine cutting tools, misc wrenches, dial indicators with various bases, etc etc.


Sale Pending:
Craftsman feeler gauges
Craftsman/General protractors
B&S 0-1" mic
Lufkin thread gauge



Sold:
Small ball gauges
Circular tapping block
Misc telescoping gauges (some still avail)
Interapid 312B-1V
2 layout blocks with holes
12" USA rule with square/center finder/protractor
Lufkin divider and general caliper
Jacobs drill chuck
Ingersoll Rand air drill
1/2" shank drill bit set
End mills lot
Chamfer tools
General wigglers
Browne & Sharpe 2/4/6 square set
Lufkin Rule No. 513 Micrometer / Depth Gage 0-3 inches Rods and Original Box USA SOLD
Mitutoyo 6" / 15 cm Vernier Caliper Stainless Japan inside/outside 1/1000 1/50 SOLD
MITUTOYO 145-194 INSIDE MICROMETER / CALIPER 1-2" SOLD
Whitney Jensen punch SOLD
MHC PRECISION PARALLEL SET MODEL # 637-7030 10 PAIRS 1/2" TO 1-5/8" SOLD
General and Craftsman 180* protractors SOLD
STARRETT 436 0-6" MICROMETER SET WITH CASE - VINTAGE - NICE! (sold on ebay)
Lufkin 74D thread gauge

6 1/2" powercut adjustable dado (box is splitting at glued seams)




Added 7/2 - T-handle Allen wrenches - $1 each plus shipping.
3 Vaco 10 mm 76310
2 unk blue handle 5mm?
1 wiha? red hande 5mm?
1 wiha black 5mm #334
1 unk red handle with welded extension 3/16?
2 Allen red handle 5/32



Craftsman Professional air ratchet 919888. $80 shipped. New, never used. Removed from box for photos.

Price update - $75 shipped.

This has been sitting in my box for a couple of years. It is made in Japan, not China.












Misc wrenches

Armstrong 5/16 1/4" 1021-S $3
Armstrong 1/2" $3 - Sold
Proto 9/16" 1218-L $3 - SOLD - Thanks, Ken!
Challenger 5/8" 6120 $3 SOLD
Plomb 7/8 3/4 1139 $5
Blue Point 1/2" raised OEX160 $5 - Sold





Papco 420 flaring tool (3/16-5/8?)

I got this in a box of tools I bought. I have never used it, but it seems to function 100%. The dies turn freely with no binding. There is corrosion on the side that I photographed and also on the handle. There are also scratches. I was going to sand it and paint it but decided not to. I hit it with some 2000 grit sandpaper to check the rust and the finish started to come off so I just left it as is. $20 shipped/paypal.

Stanley Hand Drill - $5 plus shipping

Analog multimeters:

Two of the original three are sold.

Tested on a car battery and read voltage. No other tests were done.


Micronta (Radio Shack) 25 range folding multitester 22-211

Unit 2 - Made in China, no box. Probes are in picture. $18 shipped





Used Ideal 61-070 probes - $12 plus shipping

(if there is a way to ohm test these, let me know. I don't see any damaged insulation and the probe heads retract)

FREE STUFF



Pliers, etc.
Ampro T73310 - Free with any purchase (given away locally)
Unbranded cable crimpers. Free with any purchase - gone!
Crescent Crestoloy dykes 942-5. $4 Sent to John!
Craftsman slip joints, have name/initials in them. free



China made vise "Ohio forge qv302". Kind of heavy to ship so it's free local pickup.







Hot shot r414b conversion adapters. I used one set for one season. Free with any purchase.



No picture - but a cheap set of Harbor Freight snap ring pliers, the kind with interchangeable jaws.

SOLD ITEMS (for reference only)

KD Tools 2031 exhaust cutter Sold! Thanks Justin!
Snap On C-65D tool rolls (from ignition wrench sets) Sold! Thanks Ken!
Marshalltown inches of water vacuum gauge / kilopascals Free with any purchase. Gone - Sent with a purchase!
Snap On toolbox tubular style "flank drive" lock and key #K699. Used, works well. Sold - thanks, Ryan!
Hubbell plugs 5266-C and 5269-C. Lot, $50 shipped SOLD - thanks, Frank!
Wiggy 6610 Square D. $35 shipped SOLD - thanks, Frank!
Starrett 4R 12" square. $20 shipped (sold!) Thanks Travis!
Union 12" square. $20 shipped. (Sold!)
Machinists parallel clamps - unbranded $5/pair plus shipping or add to any purchase (sold!)
Vise grips Sold!
Vintage SK ratchet / extension / socket lot. SOLD! - Thanks, John!
2 3/8 ratchets. One says SK Wayne
3 3/8 extensions
1 3/8 breaker
1 1/4 breaker
misc sockets
SK Wayne 40170 1/2 drive ratchet $50 shipped - traded to Carlton - thanks!
Misc wrenches - $1 each unless specified. Make an offer for all or some. The first column is all Craftsman / Sears / Dunlap, the second is unbranded USA tools, the third is some better names and/or vintage. - SOLD - Thanks, Ken!
Craftsman 4076 dial indicator. $20 shipped. - SOLD - Thanks, Ken!
Vintage 9/16 drive tools. All have rust/corrosion, etc. Make an offer. (TRADED! Thanks, Steve)
Snap on box, snap on sockets, snap on driver (the plastic handle is breaking)
Armstrong M-51 socket wrench (sold!) - Thanks, Ken!
EDIT - I Found a part number on the slider, it is a snap on m-5
Thexton 802 idle kit Free with any purchase.
Small engine rebuilding tools: (I would like to combine these as a set) $150 shipped Sold locally.
Neway 102 valve seat cutter
19063 valve spring compressor
670238A timing tool
1 throttle wire bender
Welding itemsTips, hoses, etc - $25 shipped (given away locally)
Vintage Fleet socket wrench and sockets / USA. Not sure if anyone collects these. $15 shipped - sold, thanks John.
Wooden handled screwdrivers - most say Buffalo. Free with any purchase. - sent to John!
Simplex 3a mechanical spreader jack. $35 shipped - Sold! - Thanks, Brett
Used AEMC Megohmmeter Model 1210 500v. $90 shipped. Thanks, Brett
Proto 5463 1/2 extension $6 plus shipping - Gone - sent with package!
Ugly's 2008 electrical reference manual. $10 SOLD! Thanks, Steve.
End mill lot - $45 shipped (sold on eBay)
Micronta (Radio Shack) 25 range folding multitester 22-211
Unit 1 - Made in Korea. One plastic screwhead broke off (seen in photo). Original box and manual (probes are in box, included). $30 shipped
Herald TE-27A MultimeterMade in Japan. Original box, probes included. $30 shipped.
Dunlap tap/die set.sold on ebay
Westhoff Machine Co horizontal drill machine sold on ebay
Miscellaneous sockets (craftsman, blue point, SK, husky) SOLD - thanks, Bob!
Chinese table top drill press SOLD
Craftsman smooth plane 619.3742 - $28 shipped SOLD locally
Ridgid 18.0v nicad drill. One bad battery, one seemingly good one, charger works, and hard case. It was pretty well used. $15 plus shipping. SOLD locally
Midland WR-100 weather alert radio. $10 plus shipping. SOLD locally
Used Husky set of torx bits. T8-T50 SOLD locally
Ryobi 12v drill. Charger is bad. One battery is 0 v one battery is around 5v. I think the drill works. Given away locally.
Weller Soldering Gun Tested, IR gun shows 350* at tip. - SOLD, thanks Shane!
Astro Pneumatic 9730 [/B]- like new condition $10 plus shipping. SOLD
Swivel / Universal adapters and sockets Cman/SK/Bonney - SOLD on ebay
Craftsman automatic screwdriver. Made in West Germany. All functions work, has three flat blade tips. $12 shipped. Sold - thanks, Tom!
Misc pipe and crescent wrenches Most of these are heavy so shipping might be more than the value of the wrench.
18" Penens Chicago #4118 $5 (given away locally)
10" Sears Japan $3 (given away locally)
Unmarked but I believe Craftsman, -V- 44490 USA $4 (given away locally)
Billings & Spencer Co USA $4 (given away locally)
12" Dunlap Germany $5
10" Diamalloy Diamond Calk Horseshoe. Has numbers stamped in it. Sold!
8" ACE Professional $3
8" Crescent $3 - Sent to John!
6" Crescent (flaking chrome) $3 Sent to John!
4" Ampco w-69 (has numbers scribed) $10 (TRADED!)
SIR TOOLS ST9015 / ST 9015 Radio Removal Tool Key Set
Lisle 38060 Axle Shaft Seal Installer for Ford Trucks
OTC 7491C - GM Upper Control Arm Knock-out Tool
Starrett protractor (engraved)

Make an offer!

Moved pictures!

moved photos

moved photos

I'll be posting some stuff on ebay....buy here and save $$$!

moved photos

moved photos

Bump.

Older Craftsman table saw for pickup in south Chicago suburbs:

http://www.garagejournal.com/forum/showthread.php?t=289428

sold item

Bump for ratchet added above!

Added items

Lowered prices

Bump

See CL ad above for machinist tools.

I took about 80 pictures tonight and added them to photobucket. Feel free to look.

Updated with sold items and added some.

Bump - see post #2 for updated ads.

Added more tools and reorganized.

Updated 8/29.

Bump - added some items on ebay.