woody 73
Well-known member
This story took me on a wild ride and several hours of web-searching and late last night of all places it led me to the AA web site sigh...I should have known better and started there in the first place, oh well live and learn as they say!
The following tool is not only vintage but more like antique being at least 100 years old. Smith & Hemenway got there start back in 1898 operating as a manufacturer and importer of hardware items, with offices in New York along with their factory in New Jersey. I will leave a few very nice links for the complete story for you too enjoy reading along with a few special notes.
Special Notes: "Tools coming from S&H Co. were frequently marked with their trademark red devil , either with or without the company name or "S&H" initials." ; from the AA web-site. It should be noted that my example only has the following S. & H. Co. 160 x 5/8
IN 1926 S&H was sold to the Crescent Tool Co.; be sure and look at the picture from the AA web-site and you can see some resemblance with the letters and numbers with both tools in question.
One last note the two men fell into a dispute back in 1925 and Smith bought out the shares of Hemenway be sure and see the link for more information.
Pictures and links just another company to look out for in your hunting.
http://alloy-artifacts.org/smith-hemenway.html
https://en.wikipedia.org/wiki/John_Francis_Hemenway
http://trowelcollector.blogspot.com/2014/10/red-devil-inc.html
http://www.trademarkia.com/map/little-red-devil-pliers-are-your-fingers-of-steel-71157047.htm
http://query.nytimes.com/gst/abstract.html?res=9A0CE2DE103AEF3ABC4151DFBF66838E639EDE&legacy=true
http://alloy-artifacts.org/Photos/tools/crescent_489_punch_taper_07_octagon_f_cropped_inset2.jpg
The following tool is not only vintage but more like antique being at least 100 years old. Smith & Hemenway got there start back in 1898 operating as a manufacturer and importer of hardware items, with offices in New York along with their factory in New Jersey. I will leave a few very nice links for the complete story for you too enjoy reading along with a few special notes.
Special Notes: "Tools coming from S&H Co. were frequently marked with their trademark red devil , either with or without the company name or "S&H" initials." ; from the AA web-site. It should be noted that my example only has the following S. & H. Co. 160 x 5/8
IN 1926 S&H was sold to the Crescent Tool Co.; be sure and look at the picture from the AA web-site and you can see some resemblance with the letters and numbers with both tools in question.
One last note the two men fell into a dispute back in 1925 and Smith bought out the shares of Hemenway be sure and see the link for more information.
Pictures and links just another company to look out for in your hunting.
http://alloy-artifacts.org/smith-hemenway.html
https://en.wikipedia.org/wiki/John_Francis_Hemenway
http://trowelcollector.blogspot.com/2014/10/red-devil-inc.html
http://www.trademarkia.com/map/little-red-devil-pliers-are-your-fingers-of-steel-71157047.htm
http://query.nytimes.com/gst/abstract.html?res=9A0CE2DE103AEF3ABC4151DFBF66838E639EDE&legacy=true
http://alloy-artifacts.org/Photos/tools/crescent_489_punch_taper_07_octagon_f_cropped_inset2.jpg
Attachments
Last edited:



