motofool33
Well-known member
So a while back i picked up a Skat Blast 960 cabinet it had one Flood Lamp inside and i hadnt used it yet so i didn't realize how dim it was.
The previous owner ran out of Lense Liners so the Glass was frosted more than i wanted to deal with cause the cabinet was wayyyyy to dusty inside when on. So on to TP tools site to get some goodies. I saw there was a Dust Collector Upgrade that might fix my dust issue, ordered that up with the round HEPA Filter. Ordered new Window Glass and Liners, then i was looking at the offered magnetic LED Lights inside when i decided they were not bright enough. Oh but wait i now have a slightly frost glass piece that i could use for more lights. SO i hoped on Amazon Bought me a 10k Lumen LED panel Light(69$) and the construction began.
https://www.amazon.com/gp/product/B077P95PBQ/?tag=atomicindus08-20
Cut a Window out in the top with the window as Template.
Then pulled out the sheet metal Tools and small piece of 18 gauge Sheet Metal.
And Tried out my newly purchased Shear and Brake for first time.
Spent some time learning how to use the brake and get the offset flange style i wanted because i didnt want to order the plastic window mount from Tp Tools and wait.
Finally got a flange made and then i needed a gasket for the glass to keep the Abrasive in the cabinet. Found some Left over Tool Box Liner material the sticky kind but it wasnt sticky enough so added some loctite 60second hold.
The previous owner ran out of Lense Liners so the Glass was frosted more than i wanted to deal with cause the cabinet was wayyyyy to dusty inside when on. So on to TP tools site to get some goodies. I saw there was a Dust Collector Upgrade that might fix my dust issue, ordered that up with the round HEPA Filter. Ordered new Window Glass and Liners, then i was looking at the offered magnetic LED Lights inside when i decided they were not bright enough. Oh but wait i now have a slightly frost glass piece that i could use for more lights. SO i hoped on Amazon Bought me a 10k Lumen LED panel Light(69$) and the construction began.
https://www.amazon.com/gp/product/B077P95PBQ/?tag=atomicindus08-20
Cut a Window out in the top with the window as Template.
Then pulled out the sheet metal Tools and small piece of 18 gauge Sheet Metal.
And Tried out my newly purchased Shear and Brake for first time.
Spent some time learning how to use the brake and get the offset flange style i wanted because i didnt want to order the plastic window mount from Tp Tools and wait.
Finally got a flange made and then i needed a gasket for the glass to keep the Abrasive in the cabinet. Found some Left over Tool Box Liner material the sticky kind but it wasnt sticky enough so added some loctite 60second hold.
Last edited:
