Seville Classic LG Rolling Workbench?

sledmods · Nov 22, 2009

After all this talk about the Seville Classic Rolling Cabinets I decided to head down to my local Sams Club today. Had to "shoulder tap" to get in since I am not a member.

Anybody have one of these?

Price is good. On the box it says up to 300lbs which seems a little light to me.

I was thinking of something like this and 2 large HD Storage Cabinets http://www.sevilleclassics.com/products.php?pid=88

I have a small tool box already so i won't be putting most of my tools in it.

My concern is the durability of the workbench. I need something that can take some abuse.

I am also considering one of these to replace my existing toolbox http://www.strictlytoolboxes.com/ro...l-boxes-7218-professional-roller-cabinet.html

and 2 Large Gladiator rolling cabinets next to it.

But this option is much more expensive.

blownmodela · Nov 22, 2009

I bought 4 of these. Great, but be prepared to spend a few hours a piece to put them together.

ZRX61 · Nov 22, 2009

Dang, that would be great in the kitchen

Hardware · Nov 22, 2009

Saw them in sams.. they are really sharp looking..

Hardware · Nov 22, 2009

They didnt have the large rolling workbench...??? WTF?

hguerrero · Nov 22, 2009

can those measurements be right? only 20" of depth/width? seems shallow.

TONE · Nov 23, 2009

Those look like a great deal.

Are the rear casters lockable? They look like it.

Also, as mentioned above, isnt 20" to shallow for a bench?

Maybe bolt two together and use as a nice island bench?

bucs012 · Nov 23, 2009

I did see them BUT I want to sit down at my bench at times with my legs under it. No room......

sledmods · Nov 23, 2009

i guess you could just put your own counter top on that is deeper???

JeepHD · Nov 23, 2009

I have had two of the large storage cabinets and two of the small roll around(http://www.samsclub.com/shopping/navigate.do?dest=5&item=384394&pCatg=7085) for about 6 months. In my opinion they are built very nice except for the door fronts, they seem flimsy and easily dented. I would still buy them again, as they are good products and cheaper than about any other comparable alternative. If they would have had the one you posted, I probably would have passed on the two smaller ones and got the one big one.

Good luck, and yes they do take quite a bit of time to assemble.

rikmeister · Nov 24, 2009

you can get a pass and buy anything. just go to the main desk and tell them you want a pass to look around. you can still buy but you can not use a check . You can also have someone with a card buy it for you. but again you will have to let them put it on their credit card or use their check and pay them cash up front.

sledmods · Nov 27, 2009

Update: I went and bought the Workbench and 4 of the Cabinets. The workbench took for ever to put together but in the end well worth it. Overall i am pretty impressed based off the price.

The box is heavy so make sure you have help. It comes in 2 boxes and I had to load one at a time.

I'll be spending the day cleaning up the garage a little so will post some pics later.

TONE · Nov 27, 2009

Id llike to see photos of the inside of the drawers (mostly the right side)

If anyone has the time.

Thanks

sledmods · Nov 27, 2009

still got some work to do but you can get the idea

hguerrero · Nov 27, 2009

that looks great

mcdtommy23 · Jan 30, 2010

I can't find these anymore. Any place have these other than Sam's?

sledmods · Jan 30, 2010

i saw them in my sams club last week. they are not at all the sams clubs in my area so maybe try a different one

Az Scooter · Jan 30, 2010

I picked up a cabinet today, and assembled it. I was actually really impressed with the quality vs. the price. The cabinet took me about an hour and a half to assemble, but is so well marked, that there are no included directions. I thought it was more simple to put together than Sauder furniture, or Ikea stuff.

DDLexus · Feb 2, 2010

I've got 2 tall cabinets, a solid maple work bench, and 2 rolling short cabinets. This company makes some top quality pieces. The instructions, parts, tools, and packaging are great too. I'll continue to buy their products. Sam's Club typically stocks these items and the prices are unbelievable compared to the others.

rwhite692 · Feb 2, 2010

Are the shelves in those rolling cabinets made out of metal, or are they MDF/particle board?

sledmods · Feb 2, 2010

metal

jdthor · Feb 4, 2010

I bought the rolling workbench at Sam's yesterday. Had to borrow a Suburban to get it home. The two boxes weigh about a zillion pounds. I will post an "assembly report" when I put this thing together this weekend.

Since I was there anyway I bought two of the rolling cabinets, I think they were supposed to fit under the "open" maple work table that is sold at Sam's. These guys weigh about a half zillion pounds, and I assume it is because of the maple? tops.

Being able to charge to the Sam's card is dangerous.

sledmods · Feb 4, 2010

jdthor said:
I bought the rolling workbench at Sam's yesterday. Had to borrow a Suburban to get it home. The two boxes weigh about a zillion pounds. I will post an "assembly report" when I put this thing together this weekend.

Since I was there anyway I bought two of the rolling cabinets, I think they were supposed to fit under the "open" maple work table that is sold at Sam's. These guys weigh about a half zillion pounds, and I assume it is because of the maple? tops.

Being able to charge to the Sam's card is dangerous.

The rolling work bench is heavy and wait till you open the box and see all the pieces. Grab a six pack and enjoy the enclosed magnetic screw driver

TONE · Apr 5, 2010

Has anyone bought one of these recently?

I was thinking this or the HF box

elcidd · Apr 7, 2010

TONE said:
Has anyone bought one of these recently?

I was thinking this or th HF box

I put one of these together two weeks ago. Really pleased with the construction and quality of parts. I plan on getting a couple more.

rwhite692 · Apr 7, 2010

Has anyone here in the bay area seen these for sale at a Sam's club?

mothgrey · Apr 8, 2010

Does anyone know if Sam's still has this large box. I cant find it on the web site and none in my store?

sledmods said:
After all this talk about the Seville Classic Rolling Cabinets I decided to head down to my local Sams Club today. Had to "shoulder tap" to get in since I am not a member.

Anybody have one of these?

Price is good. On the box it says up to 300lbs which seems a little light to me.

I was thinking of something like this and 2 large HD Storage Cabinets http://www.sevilleclassics.com/products.php?pid=88

I have a small tool box already so i won't be putting most of my tools in it.

My concern is the durability of the workbench. I need something that can take some abuse.

I am also considering one of these to replace my existing toolbox http://www.strictlytoolboxes.com/ro...l-boxes-7218-professional-roller-cabinet.html

and 2 Large Gladiator rolling cabinets next to it.

But this option is much more expensive.

robertearl · Apr 9, 2010

Yes they still have them. I just bought one. Not all Sam's clubs have them. You can ask at the store and they will tell you the closest one that does.

Reb

regguy1 · Apr 9, 2010

robertearl said:
Yes they still have them. I just bought one. Not all Sam's clubs have them. You can ask at the store and they will tell you the closest one that does.

Reb

Costco has just added this item:

http://www.garagejournal.com/forum/showthread.php?t=60834

Might be an alternative?

Seville Classic LG Rolling Workbench?

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

New member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member