e-tek
Well-known member
Let see them too!
Last edited:
What brand lift do you have?
- Thread starter e-tek
- Start date
mikeyr
Well-known member
Perfect Park 7000
Had it about 10-12 years now, it works
I clicked "Other" because my 4post is not listed, my scissor is Bendpak.
Had it about 10-12 years now, it works
I clicked "Other" because my 4post is not listed, my scissor is Bendpak.
gsport
Well-known member
here's my dannmar D7x
I have a BendPak and two "Other" brand Lifts in my garages...
BendPak XPR-10ACX 10,000 pound capacity two-post lift
Stinger 7,000 pound capacity four-post lifts
Mohawk System I 10,000 pound capacity two-post lift
Here's a comparison that I posted about three different two-post lifts...
http://www.garagejournal.com/forum/showthread.php?t=19456
.
BendPak XPR-10ACX 10,000 pound capacity two-post lift
Stinger 7,000 pound capacity four-post lifts
Mohawk System I 10,000 pound capacity two-post lift
Here's a comparison that I posted about three different two-post lifts...
http://www.garagejournal.com/forum/showthread.php?t=19456
.
FlameOut
Well-known member
My Dannmar Maxjax
hilld
Well-known member
I have a Mohawk, maybe you can add that to your poll.
brockstar
Well-known member
No pics, but my brother and I own a Nussbaum SPL-8000
silver hair deere
Well-known member
saabman
Well-known member
Bendpak XRR-9F
The Hot Rod Grille
Well-known member
zsuperbee
Well-known member
jethro29
Well-known member
challenger,10.000lbs versametric.
Iroc-Z
Well-known member
Nussbaum two post.
DHS
Well-known member
I recently picked up a Group 10X lift which is a older Nussbaum. I have not set it up yet, my concrete is only 4" so I will have to cut out a section and re pour so I cant comment if I like it or not, only I liked the price....lol.
c39er
Well-known member
ScaldedDog
Well-known member
Rotary SL210RA in-ground...
Mark
Mark
AMCguy
Well-known member
HYDRA-LIFT 9,000 pound "H" beam lift. Made in Ontario. Mines about thirty years old.
TheShrine
Well-known member
OH8000 DIRECT LIFT by Dover.
kchalle
Well-known member
Question
Well-known member
A used BenPak from a Junkman
sfm 1951
New member
Bend Pak HD-12-D Steve
Flathead Youngin'
Well-known member
Other= none! 
I sure will when I get the pole barn done.....
I sure will when I get the pole barn done.....
brockstar
Well-known member
Ours was in a Kia dealership that downsized. We found it on Craigslist - listed as Nubbaum!
Its a good lift, but parts are pricey and very few places carry parts. If I were buying another, I'd go with Rotary.
mikeyr
Well-known member
You have your cars mixed up the daily driver should be on the bottom and the Mazda which I assume is just for really bad rainy day driving should be on top.
Love the GT although I am GTS or true convertible kind of guy, I drove my friends GT often enough to appreciate it (we were looking forward to his 246GT breaking 200,000 miles, but he passed away 7,000 miles short of that goal, new owner nave the luxury of a 0 mile Dino). At about 10,000/year my Dino will get there in 3 1/2 years.
Ezzie
Well-known member
Complete Hydraulic SL 1000 OH (actually is a Korean built Powerrex).
That would be John Corbani. I heard his car found a home.
mikeyr
Well-known member
WOW very good, yes it was John and yes it has found a new home. I miss seeing that car in my driveway and around town.
HIRISC
Well-known member
Couple of HD-9's and a MD-6XP (Bend Paks).
Sorry for the thread jack, but anyone have the 2 post Triumph lift distributed by National Auto Tools?
http://nationalautotools.com/nto9a-9...ift-p-145.html
http://nationalautotools.com/nto9a-9...ift-p-145.html
chevelle64
Well-known member
osu69
Well-known member
Here's my new Bend Pak in use for the first time. One of these days, I'll post some pictures of the new garage construction but for now this seemed an easy way to show off the lift.
I had the lift shipped to my warehouse, brought it home on a car trailer, and used my tractor with brush forks to unload and stage the uprights. Assembly was smooth and setting the uprights was a piece of cake for three people. Standing on your hind legs is the only way to work under a car.
I had the lift shipped to my warehouse, brought it home on a car trailer, and used my tractor with brush forks to unload and stage the uprights. Assembly was smooth and setting the uprights was a piece of cake for three people. Standing on your hind legs is the only way to work under a car.
Attachments
Chris05gto
Well-known member
I have a Mohawk, maybe you can add that to your poll.
Do you have any better pics of your truss mod? Thanks
JerseyJim
Well-known member
Thanks to all!
BendPak would appear to be the big winner here. Followed closely by Rotary. I'd say that people are definitley happy with these two brands - which says something about their popularity. Anybody read anything else into this thread?
As well, I think the Rotary is priced well about the BP line....that true?
BendPak would appear to be the big winner here. Followed closely by Rotary. I'd say that people are definitley happy with these two brands - which says something about their popularity. Anybody read anything else into this thread?
As well, I think the Rotary is priced well about the BP line....that true?
hilld
Well-known member
Hope this helps.
http://www.garagejournal.com/forum/showpost.php?p=841428&postcount=2
The cross piece is a 2x8, the gussets are 3/4 plywood, nailed in a 2" square pattern.
If you need additional information, PM or email me.
Derek